bookworm112

SprocketStudios

I designed these after not being able to find beads with the symbols I wanted. They were created using an (included) OpenSCAD script.&nbsp;Important: Read instructions before printing to avoid errors!&nbsp;There are two ways to print them: multicolor with an AMS (show in the lower rows) or single color and then paint them (shown in the upper rows). Painting requires a very steady hand and very fine brush. You can tell from the photo that I'm not very good at it.&nbsp;Designed for a 0.2mm nozzle. I haven't tested them with larger nozzles.&nbsp;Good bed adhesion is essential. There are lots of small sections inside letters which need to be properly adhered to the bed. I normally print directly on PEI but for these I used glue stick. &nbsp;Copy and paste all 3 parts of the letters you want in the quantity you want. Unfortunately there's no way that I've found to organize the parts when exporting from OpenSCAD, and similarly no way that I can see to move parts of an assembly to a new assembly in Bambu Studio.&nbsp;You can use the included OpenSCAD script to generate beads in any size, font, or symbols you like. However you must use one of the more recent <a target="_blank" href="https://openscad.org/downloads.html" rel="nofollow noopener">nightly builds</a> which supports lazy union. This is important for being able to have multiple objects for painting in a .3MF file. There is a bug with Bambu Studio's slicer wherein if you just paint the solid beads they'll get these little blobs around them, so the multicolored beads are exported as assemblies with 3 separate objects. &nbsp;In addition to the script you will need the fonts <a target="_blank" href="https://fonts.google.com/specimen/M+PLUS+Rounded+1c" rel="nofollow noopener">M Plus Rounded Extra Bold</a> (for letter beads) and <a target="_blank" href="https://fontawesome.com/download" rel="nofollow noopener">Font Awesome Brands</a> (for logo beads) in the same folder.

Letter / symbol beads for friendship bracelets

Craft

Sakul

📐Corner Clamp for Woodworking🪚 I needed some corner clamps for a woodworking project that I&#39;m currently working on.Most of the corner clamps I found still needed a traditional one-hand clamp for tightening, so I designed my own that are fully 3D printed and don&#39;t need additional parts. I increased the wall count a little bit in the print profile to ensure that the parts are strong enough. The thread in the rail may look a bit rough after printing, but it worked like a charm without post-processing.  You may also like: <figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000176297/design/2024-06-04_8706199eaa5e9.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000176297/design/2024-05-01_1338867632a42.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>

Corner Clamp for Woodworking

Utility

pmorgan

This is one of a set of trays all designed to go side by side as the cut-outs on the sides align with each other and allow for easy utensil grabbing. Simply see which sizes you need to suit your needs and print that combination of trays.&nbsp;The walls are 4.25mm thick and have a bit of extra infill to make them stronger. The edges are filleted for aesthetics and to limit edge-cuts when reaching into the drawer in the dark on late night snack excursions.&nbsp;The bottom is not magnetic. Gridfinity by Zack Freedman: <a target="_blank" href="https://www.youtube.com/watch?v=ra_9zU-mnl8" rel="nofollow noopener">https://www.youtube.com/watch?v=ra_9zU-mnl8</a>

6x1x60mm Gridfinity Silverware Tray

Organizers

Procs Design

This is a decorative foldable gift box which you can use to gift small presents, decorate your desk, put under a tiny Christmas tree, store candies, and whatever you can think of. This design features a box base and a lid that fit together. I designed it so that it requires no glue, tape or screws; minimal purge waste to print; different designs to choose from; and two sizes, the smaller one being able to fit on an A1 mini. It uses a single layer thin living plastic hinges and tabs that allow you to fold and snap it together to a sturdy box (as sturdy as a thin layer of plastic that is) and is surprisingly strong! Since it prints flat and folds up, the designs can come from Hueforge and only requires multicolor filament changes at layers which significantly reduces purge waste! This also means that an AMS is not required but is helpful. Unfortunately, the sizes are a bit small as you can only fit so much of a foldable design on the print bed.&nbsp;Sizes (interior volume):<ul><li>Normal (Printable on X1C, P1S, P1P, A1): 7.5cm x 7.5cm x 7.5cm (2.95 in x 2.95 in x 2.95 in)</li><li>Small (Printable on X1C, P1S, P1P, A1, A1mini): 5cm x 5 cm x 5cm (1.96 in x 1.96 in x 1.96 in)</li></ul>&nbsp;Print instructions:<ul><li>Designs are separated by profiles, each pattern has two versions. One for the X1, P1, A1 printers, and one for the A1mini. The A1mini can only fit the small size while the X1, P1, A1 versions have both sizes! Read the description carefully and select the correct design you want. Make also sure to select the correct plates of the size you are interested in.</li><li>If you have an AMS, use only the AMS plates in the profiles! If you don't have an AMS, use the pause swap plates. When using the pause swap plates, it will pause at the color changes. Simply unload and load a new color filament and resume the print. The profile description has a description of the order of colors so make sure to read them.</li><li>All you need to do is decide on a pattern to print, then select my appropriate profile. Afterwards choose what plate you want to print, each plate will have a different part, size, and AMS requirement. Do not increase the number of copies as it will auto rotate the models which may cause the living hinges to fail.</li><li>Tolerances are tight for this model due to the living hinges. Please make sure that your printer can handle a 0.15mm gap. Otherwise it may be a bit difficult to bend the hinges or it may fuse together.</li><li>Make sure that your first layer bed adhesion is good, the living hinges are on the first layer and any first layer defect may affect the bend-ability.</li><li>Check back every now and then, I will be updating this box with more designs as I test and print them!</li></ul>&nbsp;Assembly InstructionsWhen removing your print from the print bed, please be gentle and slow. The living hinges are thin and can be torn off if you aggressively remove the print. If using a textured or hot plate, please wait for the plate to cool completely first before removal. If using a plate with high adhesion where you need to peel or pry it off because bending the plate doesn’t work, consider using a medium for easy release like a glue stick or hair spray. Please see documentation for bigger versions of these pictures.&nbsp;<figure class="image image_resized" style="width:50.36%;"><img src="https://makerworld.bblmw.com/makerworld/draft/531581/2023-12-31_c5d5f24f17c788.png"></figure><figure class="image image_resized" style="width:49.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/531581/2024-01-15_afe3359d3d038.png"></figure>&nbsp;Designs:Spiral Pattern: Two colors, simple and fast printPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu White (background, can be any color you want)</li><li>PLA Sunlu Red (Spiral stripes, can be any color you want)</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Snowflake Pattern: Two colors, simple and fast printPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu White (background, can be any color you want)</li><li>PLA Sunlu Black (Snowflakes, can be any color you want)</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Maze: Two colors, simple and fast printPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu White (background, can be any color you want)</li><li>PLA Sunlu Blue (Maze walls, can be any color you want)</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Poinsettia Pattern: Three colors, simple and fast printPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu White</li><li>PLA Sunlu Red (Petals)</li><li>PLA Sunlu Grass green or Green (Leaves)</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Ornaments: 3 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Grass Green (Ornament color, any base color should work like red or blue)</li><li>PLA Sunlu White</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Snowy Trees: 4 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Grass Green</li><li>PLA Overture Matte Light Blue</li><li>PLA Sunlu White</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Watercolor Snowflake: 4 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Blue</li><li>PLA Overture Matte Light Blue</li><li>PLA Sunlu White</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Starry Night: 4 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Blue</li><li>PLA Sunlu White</li><li>PLA Overture Matte Yellow</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Blue Marble: 3 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Blue (or any base color you want your marble to be)</li><li>PLA Sunlu White</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;&nbsp;Great Wave: 3 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Blue</li><li>PLA Sunlu White</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Hearts Pattern: Three colors, simple and fast printPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu White </li><li>PLA Sunlu Red (lower hearts)</li><li>PLA Sunlu Sakura Pink (upper hearts)</li></ul>&nbsp;Swap Instructions:<ul><li>Start with White </li><li>At layer #5 (1.0mm) swap to Red or Pink (lower hearts)</li><li>At layer #8 (1.6mm) swap to Pink or Red (upper hearts)</li></ul>&nbsp;Basic Box and Basic SLIM Box: The basic box, no design on the walls for easy remixing or customizing.Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmAny color you want.Note the model differences:<ul><li>Basic Box has a wall thickness of the base at 2mm as all lids are designed to fit on a box that size.</li><li>Basic SLIM box has a lip of 2mm for the lid and the rest of the walls are 1mm for your remixing or sticker needs, choose that one if you want to add some depth to your box.</li><li>All lids are 1mm thick in this set, as nothing requires them to be thicker.</li><li>Keep in mind how it bends when adding details to the 3d model.</li></ul>&nbsp;&nbsp;Want to slice these files yourself?While I recommend you use the profiles I have prepared and tested, you can slice it yourself if you follow these recommendations:<ul><li>For all projects, make sure to print at 100% infill, it is thin enough that having sparse infill can cause surface defects with a minor reduction in filament used which is not worth it.</li><li>For all projects, the first layer must be 0.2mm thick, the living hinges are designed based on that thickness.</li><li>For any boxes that include Hueforge designs, please print layer height of 0.1mm with a base layer of 0.2mm.</li><li>Do not rotate the files or change the first layer infill pattern, the infill pattern must be 45 degrees to the walls of the model to allow the thin living hinge design to work well.</li><li>I do not recommend scaling the model, it has tight tolerances on the living hinge and Hueforge designs are optimized at a specific scale.</li></ul>&nbsp;Update Log2023/11/23 Release with 4 designs: Spiral pattern, Watercolor snowflake, Ornaments, Snowy trees2023/11/27 Update with 4 new designs: Snowflake pattern, Maze, Poinsettia pattern, Starry Night2023/12/03 Update with 1 new design and opened remixes: Basic Box + SLIM2023/12/31 Update with 2 new designs: Great Wave and Blue Marble2024/2/11 Update with 1 new design: Hearts Pattern

Foldable Gift Box Decorative

Christmas

HG_Design

Christmas starProject prepared to print in parts and glue everything together at the end.After letting the glue dry, sand the entire surface to round the star and paint the color you like best.

Christmas star 

Home decoration

Hamstah

Update 25/11/2023: I've added stronger versions of all 3 sizes. Some people were having difficulty printing the original model, so I've increased the height and thickened the links to give the model quite a bit more strength. The trade off is that the model is slightly less flexible, but definitely still a lot of fun to play with. Hope that helps!--&nbsp;Dual sided triangle “chain mail” style fabric. Fun to play with! I recommend printing the tester first, as it is really important that the filament adheres well to the bed for a good print. If one triangle gets knocked off the bed, it can ruin the print (though I have had success if one or two get knocked loose).&nbsp;The easier model to print (and more fun in my opinion) is the 120mm square, but I included a 250mm wide strip for those that want more of it.&nbsp;I also highly recommend using a plastic scraper to remove the print from the bed, and you won't be able to get the fabric to release by bending the bed, and pulling on the fabric will snap the joints.&nbsp;Consider changing filament on the middle layer to get a second colour on the flip side of the fabric!&nbsp;Warning: The 250mm wide version of the fabric takes a very long time to slice!

Fabric Fidget

Toys

eds_3d_shop

Working on such designs takes a lot of time and if you like my work and want to support me - please print my “Designer” printprofiles! It will help me to design more! Thank you in advance!🙏<h2>Wide Version of Bambu Lab Magnetic Purge Poop Slide for X1C / P1S</h2><h3>(side collection of filament-poop), perfect for cabinet!</h3>Update from 11.05.2024: Added “Eds-X1C-Slide (5 mm x 3mm Magnets).stl and Eds-X1C-Slide (6 mm x 3mm Magnets).stl + profiles for this versions. These two versions are from Maker <a target="_blank" href="https://makerworld.com/en/@Linthis_World" rel="nofollow noopener">Linthis_World</a> with exact 5x3mm/6x3mm magnet holes. Thank you for your huge support, Bro! 🙏😍👍&nbsp;Update from 18.12.2023: Added “Eds-X1C-Slide (6 - 8 mm x 3mm Magnets)_Thin_Mice_Ears.stl” - Version with thin 0.2mm &#34;mice ears&#34;-mini Brim - should be ok for PLA/PETG prints with thin and really easy to remove “mice ears” :-)&nbsp;My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ?I found a beautiful slide (thank you - erickson85! for sharing of your cool model!) with magnets and changed it to fit my cabinet, Especially made wider, for better poop transport, but also edited side panels.You will need 15 of 8x3 Neodim magnets - dont worry about, they will hold this slide secure in place!!! ;-)Just glue them in ( i made it with epoxy) and enjoy! :-)&nbsp;<figure class="table" style="width: 95.74%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width: 89.77%"><a href="https://www.instagram.com/p/CxNwetztTEb/?igshid=MTc4MmM1YmI2Ng%3D%3D" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047476/design/2023-10-22_ec8d1863e82b8.jpeg"></a></figure></td><td><figure class="image image_resized" style="width: 89.63%"><a href="https://www.instagram.com/p/CxNwetztTEb/?igshid=MTc4MmM1YmI2Ng%3D%3D" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047476/design/2023-10-22_b869d797c2d67.jpeg"></a></figure></td></tr><tr><td colspan="2">&nbsp;<a target="_blank" href="https://www.instagram.com/p/CxNwetztTEb/?igshid=MTc4MmM1YmI2Ng%3D%3D" rel="nofollow noopener">Here in my post on instagram you can see how it really look and work!</a> </td></tr></tbody></table></figure><h4>Print / Install Instructions:</h4><ul><li>3 walls</li><li>bottom - 3 layers</li><li>top - 5 layers</li><li>infill - 20%</li></ul>!!! For secure hold on the build plate - use brim or “mice ears” (just add primitive objects “cylinder” and scale them to 20x20x0.2mm, move them on the edges and then make “assemble”).. visit me on instagram - I show tricks like this ;-) Or just use my print profile!&nbsp;Im uploaded two versions of trash-tray - short version is your good option for Bambu Lab bed. If you have a bigger printer - you can try the long version for 300x300 bed.. but short one is really enough!&nbsp;And fancy logo for this trash-tray is here - for a nice multicolor print! :-) After print - i&#39;m just glued it on the front!&nbsp;— ! —&nbsp;Thanks for downloading, rating in advance and please don&#39;t forget to like this model! ;-)<h3>Take a look at my another very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047476/design/2024-01-12_00009ce9c82bf.png"></a><figcaption>🔗<a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">Eds_3D_Shop designs on MakerWorld</a> 🔗</figcaption></figure>&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;&nbsp;