mikelb0013

For those individuals who enjoy rooting for their team no matter what!&nbsp;Your very own Seattle Seahawks LED sign. Complete with mounting slots and cord slot! No supports needed. LED light can rest on a desk as well and stands freely on its base&nbsp;I designed the system with this <a target="_blank" href="https://amzn.to/3Vq9XbA" rel="nofollow noopener">LED light set</a> with the LEDs and cord slotting through the small hole at the base of the R.<ul><li>I personally get the 6500k White for an overall brighter look and the COB strip creates no hot spots in my opinion</li><li>Any led style lights should work, just may not fit perfectly through the slot, but shouldn&#39;t be an issue either way.</li></ul>Filament I used (feel free to use whatever colors you think match, I love hatchbox and sunlu and they continue to work great with my X1C printer):Green: <a target="_blank" href="https://amzn.to/3Xl5cmk" rel="nofollow noopener">Hatchbox Green</a>White: <a target="_blank" href="https://amzn.to/4ceyJ5i" rel="nofollow noopener">Hatchbox White</a>Navy: <a target="_blank" href="https://amzn.to/4efuaK5" rel="nofollow noopener">eSun Navy</a>Gray: <a target="_blank" href="https://amzn.to/3z8XFgh" rel="nofollow noopener">Hatchbox Gray</a>&nbsp;Disclosure: This post contains affiliate links. If you make a purchase through these links, I may earn a commission at no extra cost to you. Thank you for your support!&nbsp;If you have a team you&#39;d love to see, leave a comment and I&#39;ll design it and get it in the LED box collections!

Seattle Seahawks LED | Bar Sign | Bar Neon

LED Lights

Update Version 2 (3/4/24):&nbsp;Added print profile V2 (190mmFramesV2MW profile) that requires WAY less supports (only needed for key overhangs on two frames, other frames need 0 supports.&nbsp;Be sure that hueforge print dimensions* are set to 190 x 190 to fit this updated frame version otherwise V1 with deeper pockets will be needed.&nbsp;*Do NOT change the dimensions of the Frames, they are set with specific tolerances and any adjustment large or small will effect how they slot together&nbsp;200mm Interlocking Frame can be found <a target="_blank" href="https://makerworld.com/en/models/217207#profileId-236230" rel="nofollow noopener">https://makerworld.com/en/models/217207#profileId-236230</a>180mm Interlocking Frame can be found <a target="_blank" href="https://makerworld.com/en/models/226156#profileId-243905" rel="nofollow noopener">https://makerworld.com/en/models/226156#profileId-243905</a>&nbsp;Original (2/24/24)190mm Interlocking Frames for Ninja turtle Hueforge Use supports<ul><li>If you print the Top Right (Mikey 190) or Bottom Left (Donny 190) no key slots protrude out and can be used as single use.</li><li>Top Row picture slots come from the top down (Leo and Mikey). Bottom Row Slots come from the left (Donny) or right (Raph)<ul><li>Pictures can be taken out and replaced at all times, nothing is blocked</li><li>Can hold up to 3mm Thick Lithos or hueforge</li></ul></li></ul>Hueforge links: If you happen to grab the 200x200 ones, you will need to trim off 5mm on each size. I apparently only grabbed the Michelangelo 200x200 the rest all seemed to be 190mm anyways. Even trimming isn&#39;t a big deal as its all black anyways.&nbsp;<ul><li><a target="_blank" href="https://makerworld.com/en/models/123303#profileId-132862" rel="nofollow noopener">Leonardo / TMNT / Ninja Turtle / Wall Art / 2d art by 3D Prints This Week - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/123302#profileId-132861" rel="nofollow noopener">Michelangelo / TMNT / Ninja Turtle / Wall Art / decor by 3D Prints This Week - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/123291#profileId-132848" rel="nofollow noopener">Donatello / TMNT / Ninja Turtle / Wall Art / Multicolor by 3D Prints This Week - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/123282#profileId-132841" rel="nofollow noopener">Raphael - TMNT / Ninja Turtle / Wall Art / Raphael by 3D Prints This Week - MakerWorld</a></li></ul>

190mm Hueforge Interlock Frames; No Glue Required

HueForgeFrames

Keep all your tables water rings at bay with your Seattle Seahawks Coaster.&nbsp;I print all my coasters face down on a textured plate to give a grippier rough surface (Textured PEI sheet), but they could be printed face up if you so choose, would just have a different finishing surface. Coasters are 4mm thick with all colors changes/logos of 1mm for full color effect and no bleed through.&nbsp;If you&#39;re looking for the coaster to not slide around, the base comes with 4 indents for Rubber Feet. I designed them to match these <a target="_blank" href="https://amzn.to/4b7vawN" rel="nofollow noopener">Rubber Feet</a> that I use in all my base and coaster designs and other items I design that I do not want slipping&nbsp;Filament I used for coasters (feel free to use whatever colors you think match, I love hatchbox, eSun and sunlu and they continue to work great with my X1C printer):Navy: <a target="_blank" href="https://amzn.to/3x6Hu2L" rel="nofollow noopener">eSun Navy</a>White: <a target="_blank" href="https://amzn.to/3VfuL5y" rel="nofollow noopener">Hatchbox White</a>Green: <a target="_blank" href="https://amzn.to/4ejlC4N" rel="nofollow noopener">Hatchbox Green</a>Grey: <a target="_blank" href="https://amzn.to/3RtnG0q" rel="nofollow noopener">Hatchbox Grey</a>&nbsp;Disclosure: This post contains affiliate links. If you make a purchase through these links, I may earn a commission at no extra cost to you. Thank you for your support!&nbsp;Check out the other NFL coasters in my <a target="_blank" href="https://makerworld.com/en/@bombsurace/collections/1259207" rel="nofollow noopener">NFL Collections</a> spot.

LED Lights

HueForgeFrames

NFL Coasters