boeingpilot737

sharanya

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Kexcelled Black Transmission Distance: 0.2 PLA PolyLite Pro Metallic Magenta Transmission Distance: 1 PLA Kexcelled White Transmission Distance: 4 PLA PolyLite Aqua Blue Transmission Distance: 2.5 PLA Kexcelled White Transmission Distance: 4Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Metallic Magenta At layer #9 (0.8mm) swap to White At layer #14 (1.2mm) swap to Aqua Blue At layer #18 (1.52mm) swap to White for the rest.

Butterfly Hueforge

Anita

soarpix

<h2>Tooned PORSCHE 911 - model kit</h2>(This cartoon style model is inspired by Porsche 911. Size is approximately: length 100mm, width 75mm, height 50mm)&nbsp;<ul><li>Fully printable model kit</li><li>Spinning wheels</li><li>This model does not need any additional non-3dprinted parts</li><li>The design is divided in many different parts in order to allow printing different parts with different color</li></ul>If you have any questions, let me know in the comments =)&nbsp;Follow me on Instagram <a target="_blank" href="https://www.instagram.com/soarpix3d/" rel="nofollow noopener">@soarpix3d</a>Subscribe to my <a target="_blank" href="https://www.youtube.com/soarpixcom" rel="nofollow noopener">YouTube channel</a>&nbsp;HAPPY PRINTING!

Tooned PORSCHE 911 - model kit

cars

cBoLsmUiEc

Battle Droid IG-86 / IG-88 Assasin Droid Es wurden folgende Änderungen / Ergänzungen hinzugefügt: - Die Größe wurde angepasst, so passt die Figur zu den StarWars Figuren von BigBricks. - Ein gerader Arm mit gedrehter Hand wurde hinzugefügt, damit ein Blaster verwendet werden kann - Aufnahme oben an den Beinen wurden geglättet - Kopf wurde hinzugefügt (2 farbig - keine AMS notwendig)- Blaster wurde hinzugefügt und in 2 Teile geteilt (leichteres/schöneres Endergebnis) - Gewehr wurde hinzugefügt und in 2 Teile geteilt (leichteres/schöneres Endergebnis) - Waffenhalter wurde hinzugefügt&nbsp;Drucken: (siehe von mir hochgeladenens Druckprofil) - PLA - Layer: 0,16 mm - Support: Tree support (Seitenschneider / Zange wird zum Entfernen benötigt) - Brim: Bei ein paar Teilen empfehlenswert Je nachdem wie Euer Drucker/Filament kalibriert ist kann es sein das die Teile bi zu 1% hoch oder runter skaliert werden müssen. Montage: - Beine, Körper, Arme, Kopf einfach zusammenstecken - Blaster &amp; Gewehr: zusammenkleben Achtung: Schaut auch in meine anderen Uploads, weitere Versionen der Battle Droids vorhanden (z.B. OOM-9, IG-86/88, Rocket Droid, Kashyyyk Droid, …) -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Battle Droid IG-86 / IG-88 Assasin Droid  The following changes/additions have been added: - The size has been adjusted so that the figure fits the Star Wars figures from BigBricks. - Added a straight arm with a twisted hand to allow a blaster to be used - Receptacle at the top of the legs has been smoothed - Added Head (2 colored - no ams needed)- Added Blaster and split in 2 pieces - Added Riffle and split in 2 pieces - Added Weaponholder/Backpack&nbsp;Printing: (see print sample uploaded by me)-PLA - Layer: 0.16 mm - Support: Treesupport (side cutters / pliers are needed for removal) - Brim: Recommended for a few parts It could be that you have to scale the parts up to 1% up or downm depending on your printer and filament setup.  Assembly: - Simply put legs, body, arms, head together - Blaster: glue together&nbsp;Attention: Have a look at my other uploads, other versions of the Battle Droid available (OOM-9, IG-86/88, Rocket Droid, Kashyyyk …)

Big Brick Battle Droid - IG-86 IG-88 Assasin Droid

BIG BRICKS Lego

Wing-Art

U P D A T E 3 1 . 3 . 2 0 2 4 - T H I S    V E R S I O N    I S    O U T D A T E D !&nbsp;<a target="_blank" href="https://makerworld.com/en/models/406101#profileId-307995" rel="nofollow noopener">!!! PLEASE DOWNLOAD VERSION 2.0 with QUICKLOCK MOUNT HERE !!!</a>  __________&nbsp; Universal Kitchen Dispenser for Pickle Jars (80 mm Diameter) &amp; Mason Jars&nbsp;This print file contains the design for a universally applicable kitchen dispenser, specifically developed for use with pickle jars with a diameter of 80 mm or Mason Jars.  Excellent for storing and easily dispensing various ingredients such as:  <ul><li>Coffee</li><li>Cereal</li><li>Rice</li><li>Cat food</li><li>Pasta</li><li>Lentis</li></ul>…or many other things! Furthermore, a Jar for self-printing is included in the Pickle Version!&nbsp;Design Features:<ul><li>Flap with Rubber Ring: At the bottom of the dispenser, there is a flap operated by a cleverly integrated rubber ring mechanism.</li><li>Versatile Use: The dispenser is ideal for a variety of dry foods such as coffee beans, cereal, rice, pasta, lentis and other dry ingredients.</li><li>Text Plates: Additionally, the kitchen dispenser can be equipped with text plates for labeling.</li></ul>&nbsp;Note - There are two Versions of the Dispenser:   <ul><li>Pickle Jar Version for 80mm Diameter</li><li>Mason Jar Version (als requested in the comments)  </li></ul>The printable Jars: Please note that the printable jars are only compatible with the &#39;Pickle&#39; version of the Dispenser!<ul><li>Sizes: Two options - 800ml and 2500ml for self-printing.</li><li>Print Profiles: Independent profiles for Vase Mode (translucent prints) and normal prints (solid and robust).</li><li>If you need a Lid: Available <a target="_blank" href="https://makerworld.com/de/models/96064#profileId-102443" rel="nofollow noopener">HERE</a>.</li></ul>&nbsp;It is highly recommended to print the included test thread before printing the main parts - except you print the included Jar (Pickle Version)! This is to ensure that the thread fits correctly and that the jar is compatible with the dispenser.<a target="_blank" href="https://all3dp.com/2/food-safe-filament-brands-compared/" rel="nofollow noopener">HERE</a> you can find the Best Food-Safe PLA Filaments of 2023. Special bonuses:&nbsp;Additional doors:<ul><li>10mm handle (Standard size)</li><li>20mm handle</li><li>30mm handle</li></ul>Adapter:<ul><li>Pickle-Jar Version to → Wide Mouth Mason Jar (86mm)</li></ul> Just take a look at my other Kitchen Tools here:<ul><li><a target="_blank" href="https://makerworld.com/de/models/96064#profileId-102436" rel="nofollow noopener">Printable Jars (compatible with this Kitchen Dispenser!)</a></li><li><a target="_blank" href="https://makerworld.com/de/models/96912#profileId-103376" rel="nofollow noopener">Orange Peeler Citrus Pro</a></li><li><a target="_blank" href="https://makerworld.com/de/models/99747#profileId-106354" rel="nofollow noopener">EGG-citing Nest - the classic Egg Cup</a></li><li><a target="_blank" href="https://makerworld.com/de/models/115132#profileId-123776" rel="nofollow noopener">Bottle-Can Dispenser</a></li><li><a target="_blank" href="https://makerworld.com/de/models/100260#profileId-106926" rel="nofollow noopener">Knife Cat Napkin Holder</a></li><li><a target="_blank" href="https://makerworld.com/de/models/109348#profileId-116818" rel="nofollow noopener">Hexagon Napkiin Holder</a></li></ul>

Kitchen Dispenser for Jars (included!)

kitchen

Vega3Dprinting

An exact replica of the REMOVE BFORE FLIGHT tags often found on airplanes and fighter jets. Printable in multicolor only

REMOVE BEFORE FLIGHT tag keychain replica

NASA

Speedy 3d

This is an excellent way to organize parts, screws, and tools. It can be printed thicker as it is used for craft and takedowns. You may insert the new tray design for contrast of color and a replaceable work surface. Print this surface so the PEI steel texture shows!

V1 Tool & Tech Organizer Work Mat  (TPU Insert)

basteln

fay3dlab

Im currently upgrading most of my suspended models to include channel to install led strips in them.. So for the suspended star destroyer V2.. since its already in 2 parts.. i added a channel path so you can install a LED strips around the outer frame.. and i put small holes in the inner frame so that the lights from the LED shines through to the ship..&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/516767/2024-01-01_27386ae7989a8.gif"></figure>&nbsp;If you're interested in getting the LED strips.. here's my affiliate link to buy it.. 5V USB RGB LED Strip Light https://s.click.aliexpress.com/e/_oEk0hDa &nbsp;The ship itself is modelled by nikoli2803 from thingerverse.. the circular frame is the imperial logo itself.. the whole frame i modelled it to look like the deathstar.. everything was done using Tinkercad..&nbsp;The ship itself comes in 2 parts.. front and back.. and there are 3 clips to hold both side of the ship together.. the bottom clip will be the stand for the whole suspended star destroyer and the 2 clips works on any side..Its a bit tricky to assemble since you cant put both parts of the ship down since its suspended on the strings..<ul><li>so my suggestion is to put the bottom clip down on a table and then put the 2 parts into the clip..</li><li>it should fit snuggly together..</li><li>once the frame can stand on its own.. you can put the other 2 clips onto the frame..</li></ul>When printing suspended models.. one important thing to remember is to set the wall generator to arachne from classic.. this will make the slicer print the strings..&nbsp;I hope you guys have fun printing this new version of the suspended imperial star destroyer..

Suspended Star Destroyer V2 LED strips

StarWars

xuhao3e8

Here shows my own design, the Aurora, or 极光. It's an incredibly cool FPV cruiser that offers high speed and agility.<img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_07413e4f4b99.png">The design of Aurora is inspired by the IJN J7W Shinden and XP-55, with the addition of modern aircraft elements.Including full-span canard, strakes (although they serve mostly as decorative elements), and winglets.It comes with a <a target="_blank" href="https://www.printables.com/model/567442-dji-o3-air-unit-ptz" rel="nofollow noopener">servo gimbal (included in this model, remix from FLY_101</a>) and cooling system for the DJI O3. So great if you wish to use a headtracker on it.&nbsp;The flying speed is fast, with a cruising speed of 70kph (20m/s), and it can easily reach 100-130kph, pulling 3-4g maneuvers. A large area is required for flying, and it is completely unsuitable for park flying. When the flying speed exceeds 100kph, noticeable vibrations occur in the gimbal, severely affecting the flying experience, necessitating targeted optimization in the design. Here are some basic details:<ul><li>Wing Span: 1030mm</li><li>Weight (4s 18650, no gimbal & FPV system): ~1000g</li><li>Weight (with 4s18650 battery, with gimbal & FPV system): 1170g</li><li>Estimated endurance time: 30-45 minutes (theoretically, still testing)</li><li>Cruising speed: 20m/s-30m/s, 70km/h to 110km/h</li></ul>Tested avionics:<ul><li>Flight Controller: SpeedBee F405 Wing with BZ182 GPS.</li><li>ESC: Any 30A ESC is OK</li><li>FPV system: DJI O3</li><li>Servo: Kingmax KM0940MD*4 (for flight control), and GDW DS014MG*2, 280deg/180deg (for servo gimbal)</li><li>Motor: SunnySky X2216 KV1400</li><li>Propeller: APC/Gemfan 8*6-9*6, this may push you to 100kph or faster.</li><li>Battery: Sony VTC6 18650 4s1p</li></ul>Extra components:<ul><li>Carbon fiber pole:<ul><li>2*6x4x550</li><li>1*6x4x585</li><li>1*6x4x935</li><li>3*3x250</li><li>1*3x150</li></ul></li></ul>Four 6mm (diameter) x3mm (height) magnets for battery and flight controller canopy.&nbsp;The core design concept of Aurora includes:<ul><li>Appealing aesthetics</li><li>Decent endurance time</li><li>Relatively high speed.</li></ul><h2>Printing</h2><h3>Suggest print material:</h3>Fusrock/Bambu PLA Aero.I use Bambu PLA-Aero white for Wing, and FuskRock Gray PLA Aero for Fuselage. Use PLA-Aero from two manufacturer just because colors.<h3>BE CAREFUL GO SETUP CORRECT PRINTING SETTINGS FOR FILAMENTS!</h3>Default setting is for PLA-Aero, change it according to your own filaments. Strongly suggest print Aurora with PLA-Aero.<h3>3D printer</h3>Tested on Bambu Lab X1CC, suggest Bambu Machines with size=256mm<h2>Print profiles:</h2>Fuselage, wings and extra component are placed in different print profiles. They have different slice settings.<h2>Flying Video:</h2>(Click to watch if you see video unavailable)<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=-W8qLUvWbIY"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/-W8qLUvWbIY" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>对于中文用户，可以观看bilibili和简介中的介绍:<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1xj411W7ry/"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1xj411W7ry&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1xj411W7ry&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;Gimbal system of Aurora is remix from <a target="_blank" href="https://www.thingiverse.com/thing:6193480" rel="nofollow noopener">https://www.thingiverse.com/thing:6193480</a> by <a target="_blank" href="https://www.thingiverse.com/FLY_101" rel="nofollow noopener">FLY_101</a>.You may also use <a target="_blank" href="https://www.printables.com/model/265534-dji-2-dof-gimbal-for-air-unit-camera/files" rel="nofollow noopener">this gimbal on Aurora</a>&nbsp;<h2>Center of Gravity</h2>Flight with current CG setup (the CG icon) is too stable. You may try the following CG at read line, this is optimal CG point according to my latest CFD results and flight test.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-28_43baa86270ef2.png"></figure>&nbsp;<h2>Donation to help me!</h2>Testing and releasing these model aircraft designs is neither easy nor cheap. It requires a significant investment of time and effort. The development cost of this airplane exceeds $1500, and that's not even taking into account my time. If you find my designs practical and useful, please consider making a donation to support my work. Your contributions will greatly assist me in continuing to develop these model aircraft, feel free to buy me a coffee by clicking follow button.<a target="_blank" href="https://www.buymeacoffee.com/xuhao3e8" rel="nofollow noopener"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee"></a>测试和发布航模并不便宜，这架飞机的开发成本超过万元，并且会花费非常多的时间和精力，如果你觉得我的设计非常实用，请捐款支持我，这将对我能够继续开发航模产生很大的帮助：<figure class="image image_resized" style="width:37.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-27_0ec676d5a355f.jpg"></figure><h2>Build Logs</h2>Build logs (in Chinese) for Aurora is available on <a target="_blank" href="https://xuhao1.notion.site/Aurora-1100-8851f194908a4648b1bb22ffa9a7a9cb?pvs=4" rel="nofollow noopener">my notion site,</a> this contains every detail you may want to know about Aurora.<h2>Update since upload</h2>2023/12/21: Update to integrated vertical tail and rudder: do not need manually install hinge. I put the old design of vertial tail in supported files.2023/12/23: Missing fuselage part is added to fuselage.3MF. Servo gimbal is also added to extras.3MF with original author's approval.<h2>Some details</h2>More details will be adding later.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_f29fd3e4a7b4a.png"></figure><figure class="image image_resized" style="width:58.84%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-22_d5a12ad1a93b4.jpg"></figure><figure class="image image_resized" style="width:56.85%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_3cd4e9ee5e9cc.jpeg"></figure><figure class="image image_resized" style="width:62.08%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_b01c294f7d8c7.png"></figure><figure class="image image_resized" style="width:53.14%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_12f6f67c86d8d.jpeg"></figure><figure class="image image_resized" style="width:54.3%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_d359d7203dc83.png"></figure><figure class="image image_resized" style="width:55.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_f582829daf851.png"></figure>

Aurora: Fixed-Wing FPV Cruiser

Airplanes

impietro

Hi, that's my idea of Monday night. Hi, that's my idea of Monday night. Designing and 3D printing is my hobby, I don't want to be disturbed when I work on it, for me it's a leisure. Designing and 3D printing is my hobby, I don't want to be disturbed when I work on it, for me it's a leisure. I printed this tag to put on the door, made of petg with white, red and fluorescent filament so even in the dark it can be seen. With dimensions of 150x60mm and a 30mm hole, it can be installed on all doors, 3 mm thick embossed lettering included, it can be printed in about 40 minutes with the 0.4 mm nozzle.With dimensions 150x60mm and with a 30mm hole it can be installed on all doors, 3 mm thick embossed lettering included it can be printed in about 40 minutes with the 0 nozzle

DO NOT DISTURB BAMBU LAB

deko

jpbruce

<h2>Horizontal Magsafe and AppleWatch Stand</h2>This is a combined MagSafe iPhone and AppleWatch charging Stand that holds the phone horizontally to take advantage of the new StandBy mode in iOS 17.All cable cutouts fit both USB-A and USB-C cables and all models are compatible with all iPhones that have MagSafe and all AppleWatch models.Different versions of this design by me can be differentiated by the version number (just in front of the "M") while different suffixes indicate different variants of the model at the end of the file name.<h4>Available design variants:</h4>Four variants of V5 are available, and for each variant small and large bezel sizes are available as separate print profiles:<ol><li>OriginalDesign: This is my original compact design, only allowing the phone to be held horizontally</li><li>VerticalPhone: This version is a bit longer and allows the phone to be held vertically, adding a third camera bump cutout for this position (requested by <a target="_blank" href="https://www.thingiverse.com/thing:6102038/comments#comment-6879287" rel="nofollow noopener">DonWhiteside</a> on Thingiverse).</li><li>2xMagsafe_noWatch: This is a version that replaces the Apple Watch charging spot with a cutout for a second MagSafe puck, e.g for charging your AirPods (requested by <a target="_blank" href="https://www.printables.com/de/model/589461-horizontal-magsafe-standby-applewatch-stand/comments/1147373" rel="nofollow noopener">m_reiner</a> on printables).</li><li>OnlyPhone: This is a version that removes the Apple Watch charging spot, not replacing it with anything if you don't need it (also requested by <a target="_blank" href="https://www.printables.com/de/model/589461-horizontal-magsafe-standby-applewatch-stand/comments/1147373" rel="nofollow noopener">m_reiner</a> on printables).</li></ol>If you expect more shrinkage on your Filament/Printer and would like a larger tolerance around the MagSafe-Puck, check out the 04mmTolerance Versions on my <a target="_blank" href="https://www.printables.com/de/model/589461-horizontal-iphone-magsafe-standby-applewatch-stand" rel="nofollow noopener">Printables</a>. You can also find the older Versions 03 and 04 there if you want them.<h3>Update History:</h3>Update 17.10.2023&nbsp;SmallBezel versions of each of the original four variants are now available.<h4>Update 05.10.2023</h4>Version 05 is out! This Update adds a retaining mechanism in the cable channels on the bottom of all models. You need a bit of force to get the cables in, but it is easily possible and leads to secure retention in the channels, preventing them from sticking out. The AppleWatch Charger mount is also 3mm taller to allow for AppleWatchUltras with cases to better fit.I also added a new version of the design: "SmallBezels". This version has smaller bezels around the MagSafe Puck for those wishing for a more minimalistic design. Due to the smaller bezel, the cable for the MagSafe-Puck is no longer fully contained in the model.<h4>Update 28.09.2023</h4>I've replaced all raw files and print profiles with versions that have a 0.2mm smaller tolerance on the MagSafe ring (now only 0.2mm bigger than the puck instead of 0.4mm), as the fit wasn't quite as snug as I wanted (I guess the X1C is just too dimensionally accurate compared to my old printer).<h4>Update 25.09.2023</h4>Version 04 is out! This is a slight redesign of the edges, while also consolidating the naming scheme.&nbsp;<h3>Miscellaneous</h3>I printed this in GlowInTheDark Blue PLA which looks very nice at night.If you want any other file types for a remix or something else just leave a comment and I'll do my best to provide them.

Horizontal Magsafe iPhone (StandBy) & AppleWatch Stand

apple

KENPRINT

Back to the Future Lithophane &nbsp;Give it a try and let me know how it went for you

Back To The Future Lithograph CYMK

litho cmyk

V3 Precision

This is a spool winder for transferring filament from one spool to another. Inspired by the need to use certain filament spools for the Bambu Lab AMS. This build should speed up the process and give a nice tight winding. There is room for improvement, so feel free to give some feedback either on Printables or on the Youtube videos.This version is 100% 3D printed (not including the mounting screws). Future versions will use bearings and possibly a motor to drive the gears.The images show the assemblies mounted to a 2x6 for testing. The assemblies can be mounted to a similar board or to a base made from aluminum extrusions.&nbsp;Printing RecommendationsI used PLA while developing the spool winder. I would recommend using PETG, or Nylon CF, or other stronger, stiffer filament.The ‘worm’ gear can be tricky to print. In Bambu Lab Studio, I set the part upright and set support to tree (auto) and threshold angle at 10. Set a brim at 8mm.The gears are easy to print and require no support or post processing.The bases need some support and did well with tree (auto) and threshold angle of 30.I used 4 walls and 15% infill on most pieces. The thumbscrews I used 100% infill.&nbsp;AssemblyMost of the assembly is easy and self-explanatory.Note that the rear driven gear is reverse threaded.Specific instructions can be found in an upcoming Instructions Video …….There will also be a link to the video on the V3 Precision website.&nbsp;#best3dp2023<figure class="media"><div data-oembed-url="https://youtu.be/3llHdgb1ftQ?si=rh9tLXTMeOSzBDXe"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/3llHdgb1ftQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/ru2TtLahlmw?si=5opj3V5R-Ab6cPFX"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/ru2TtLahlmw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>