bobmarleyhey

Molodos

A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one.Supported Printers<ul><li>Elegoo Neptune 3 Pro</li><li>Elegoo Neptune 3 Plus</li><li>Elegoo Neptune 3 Max</li><li>Elegoo Neptune 4</li><li>Elegoo Neptune 4 Pro</li><li>Elegoo Neptune 4 Plus</li><li>Elegoo Neptune 4 Max</li></ul>Features<ul><li>A bit smaller than the original holder to fit smaller spools</li><li>Screws in place just like the original spool holder</li><li>Have your second color already ready for multi colored prints</li></ul>Recommended print settings<ul><li>Layer Height: 0.2mm</li><li>No supports needed</li></ul>You like my work? Consider to <a href="https://www.buymeacoffee.com/molodos" rel="nofollow">buy me a coffee</a> :D

Elegoo Neptune 3 and 4 filament spool holder

n4max

Pro3DTinkering

To support my projects and gain access to a Commercial License, please consider joining my <a target="_blank" href="https://www.patreon.com/Pro3DTinkering" rel="nofollow noopener">Patreon</a> community. Your support helps bring more creative designs and exclusive content to life!&nbsp;I&#39;m happy to introduce you Infinite Hexagon v2.0 | Triangles the redesigned version of my previous <a target="_blank" href="https://makerworld.com/en/models/69564#profileId-74882" rel="nofollow noopener">Infinite Hexagon</a> fidget. Thank you for your feedback which allowed me to make the model even better!&nbsp;Please check the assembly instructions on my <a target="_blank" href="https://www.youtube.com/watch?v=jaSH712f_fI" rel="nofollow noopener">YouTube channel</a> or in the video below:&nbsp;<figure class="media"><oembed url="https://www.youtube.com/watch?v=jaSH712f_fI"></oembed></figure> Feel free to comment and share your prints; it&#39;ll be nice to see them. I would appreciate any feedback!&nbsp;Thank you,Happy Tinkering!

Infinite Hexagon v2.0 | Triangles

fidget toys

Shiny Salamence

these nuts and bolts are great for checking if  your printer is calibrated properly.if the nuts and bolts go smooth on eachother then your printer is well calibrated.

nuts and bults 20mm from m3 to m16

bolts

GoKEV_

These are replacement cargo partitions for a Dodge Truck, specifically a Ram 1500 with the Rambox cargo bays. Mine was purchased used and didn't come with partitions so these aren't necessarily a perfect match – but there are two sizes and they are a perfect fit and functional for a rambox that is missing partitions.

Ram 1500 RamBox Ram Box Cargo Partitions for 2009 - 2018 Dodge Ram 1500 (4th Generation)

RevHazlett

I made a remix of this grease packer so it can be be used to quickly and easily apply PTFE grease to 8mm lead screws. Specifically fit to the Super Lube 21030 (3oz) tube so I can get it on the rear lead screw on my Bambu X1 much easier. Works great!

8mm Lead Screw Grease Applicator for Super Lube 3oz 21030 Tube

Maintenance

m.cody.sims

Just a good Mando helmet!&nbsp;My profile doesn&#39;t have support on the inside of the helmet because I have found it didn&#39;t really help that much with the quality and it used a lot of filament. the very center of the inside will be rough because of this but it hasn&#39;t been an issue for me.&nbsp;For those wondering what I use for a face sheild I use a Hobart 770580 Face Shield Replacement Lens, Shaded from Amazon. I cut it to shape and use a little bit of hot glue along the front and near the temples. That seems to be enough. I would recommend getting air soft helmet padding for a custom fit and comfort.&nbsp;If you like my work, please consider supporting me by boosting my model or <a target="_blank" href="https://www.buymeacoffee.com/m.cody.sims" rel="nofollow noopener">buying me a coffee</a>!

Mandalorian Helmet One Piece

helmets 

dabsi_

Here another modification for your Meta Quest 3, if you have another headstrap as the original. To install it easyer, I recommend to remove the face cover.

Meta Quest 3 headstrap hole cover

meta quest

Ukdavewood

Update 16/5/24 - Added short instruction video&nbsp;Update 15/1 - Added circular threaded leg and rounded corner and edges option - see seperate print profile.<figure class="image image_resized" style="width: 47.74%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-01-15_395de0893b5748.jpg"></figure>&nbsp;&nbsp;Extendable Multi Part Real Table Model - that was primarily designed as something useful to create instead of Flushing purge waste spirals when doing multi colour prints on a Bambu Lab or other multi colour printer.&nbsp;The original idea for creating useful things out of flush/purge waste was inspired by the 3d Printing Professor youtube channel.&nbsp;The sizes of the parts are similar to Ikea Lack table thicknesses - i.e. 50mm&nbsp;This is a major print project with a minimum of around 40 major parts about 60 smaller joiner parts - which if printed single colour (or efficient multi colour) would take around 2d14h printing time and 2.25kg of filament for the basic size table.&nbsp;Also useful as something to use up odd short lengths of filament or old brittle rolls of filament.&nbsp;There are a basic minimum number of parts needed to produce a small table appx 40cm Long x 30cm wide and 30cm high.&nbsp;But then as more parts are printed the table size can be expanded in all three dimensions - by simply slotting in more parts.&nbsp;Parts are joined firmly together with Springy dovetail joiners (inpired from the Slant3d channel). The joints are pretty tight - so a small hammer is recommended to push them in.&nbsp;The joining method may be refined in the future and extra parts will be added to allow greater strength when the table gets larger.&nbsp;Also other designs - such as shelves and enclosures will be made available.&nbsp;The primary recommended way to print the parts is by adding the individual STLs to other multi colour 3d model plates - with flush-into selected. This will only work if a small prime-tower is left on.&nbsp;Many of the parts can either be scaled or sliced on the Z axis to make them the correct height to match the colour changes of the donor multi coloured 3d model being printed. Often with careful selection and scaling of parts it is possible to get flush waste down from 100s of grammes to less than 1g.&nbsp;It is technically possible for the selection of parts and scaling process to be automated at some point in the future.&nbsp;For any parts printed seperately out of waste filament it is recommended that the colour is changed either in the slicer, or via cutting the filament and changing coloured regularly in the AMS as it prints. Most of the example model parts were produced this way.&nbsp;An assembly instruction video will be made available at some point. -&nbsp;Historical background info and tracking of ongoing developments available here <a target="_blank" href="https://forum.bambulab.com/t/making-better-use-of-flush-into-object-in-bambu-studio/29422/5?u=ukdavewood" rel="nofollow noopener">https://forum.bambulab.com/t/making-better-use-of-flush-into-object-in-bambu-studio/29422/5?u=ukdavewood</a>&nbsp;NB/ Only one test print done so far as doing lots of reprints kind of goes against the ethos of this filament waste reduction model.&nbsp;For the ‘sliceable’ objects - to reduce their height in BS simply cut on Z axis below any horizontal features (but leaving enough of the part for joiners to still fit in).&nbsp;To increase the height - again use cut in BS - below the horizontal features (at 20mm for example), specify ‘cut to parts’ - then in the object browser locate the bottom part and scale it up on the Z this should also lift up the top half.&nbsp;&nbsp;<figure class="image image_resized" style="width: 59.96%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-01-12_56bb34c4d349b8.jpeg"></figure>&nbsp;Scalable objects do not have any special horizonal features - so can simply be scaled up or down on the Z axis only.<figure class="image image_resized" style="width: 60.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-01-12_636dc20582b72.jpeg"></figure>&nbsp;<figure class="image image_resized" style="width: 62.46%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-01-12_eb44cd7516818.jpeg"></figure>&nbsp;&nbsp;For illustration purposes - if all of the parts with cloned in the correct proportions for a minimum size table and the table was printed directly, rather than as flush-into object then it could be printed in 3 build plates as per the below - 3mf file not uploaded due to requirement for print profiles to have passed print tests. Total print time around 2d14h and filament about 2.25kg.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-01-12_083fef5cc87d3.png"></figure>&nbsp;Basic steps I usually take to minimise flush volumes.&nbsp;To reduce purge waste the basic steps I take are: 1. Model orientation/numbers/sliceup - if possible orient the model in such as way as to minimise the number of colour changes per layer, also consider doing multiple copies of the same or similar models together to reduce waste per model.Finally in some case you can save a lot of waste with some simple slicing up of the model into smaller parts that print more efficiently and can then be joined back together after printing. 2. Optimise flushing volumes - using the button in BS above the filaments. Personally I usually set the Multiplier to 0.5 or 0.6 and press re-calculate 3. Reduce the size of the prime tower - Under Process - press Global, then in the &#39;Others&#39; tab - on my setup I current set Prime Tower width and volume to 10mm 4. Now preview the slicing to see how Flushed Waste you will be getting compared to the Model. 5. Now if there is space on the build place as a few Colour-doesn&#39;t-matter objects onto the build plate - such as component parts of this Purge Waste Table. Look at where in the multi colour model the colour changes occur - and if possible change the heights of the Purge Table parts to match the same layers (as the top surfaces are better at absorbing purge than the middles).  6. Right click on the added objects and select Flush Options, Flush into this object. 6. Re-Preview to see if the Flush volume has gone down - I tend to target getting the volume down to less than 1g 7. Keep cloning or adding more objects repeating the above steps until you have reduced the Flush volume down to acceptable levels. I appreciate that adding the flush-into objects is out of the box a fairly manual process - and I am working on some scripts to automatically select the best objects and the best heights for each print and also optionally to remove the prime tower from the GCode.&nbsp;I am hopeful that at some point BL will add this sort of functionality into Makerworld or Bambu Studio.&nbsp;updated June 24 - added 4 extra channels to table to increase size by 80% using mostly waste purge.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-06-09_8af12b1fe8591.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000135517/design/2024-06-09_a63a066e60d938.jpeg"></figure>

Purge Waste Table V1

purge objects

SNASA

This is a small and stealthy minimalist heat insert press designed for CNC Kitchen TS100 heat insert set. I didn&#39;t want to use a counterweight so I made an invisible spring and belt system hidden in the vertical part. Its size makes it perfect for small job on the workbench :<figure class="image image_resized" style="width: 42.73%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_a86cd65962c1d.jpg"></figure><figure class="image image_resized" style="width: 42.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_4f0eadde94f.gif"></figure>&nbsp;The sides are super convinient to store everything you need (there is also a spot for a small alen key).&nbsp;I have added the step files if you want to design your own soldering iron mount or use a different base.&nbsp;Miscellaneous:<ul><li>20 * M3 brass insert</li><li>22* M3x8</li><li>1 * M3x6 screw</li><li>2 * M3 Nut</li><li>3 * M3x25 screw</li><li>7 * M5 nut</li><li>6 * M5x10 or M5x12 screw</li><li>1 * M5x16 thumb screw</li><li>2 * GT2 idle pulley ID Ø3mm</li><li>1 * GT2 belt (200mm should be enough)</li><li>1 * Spring or elastic band</li><li>1 * LML12B 200mm linear rail</li><li>1 * <a target="_blank" href="https://cnckitchen.store/products/ts100-101-adapter-tips-set-m2-x-m3-m4-m5-m6-1-4-m8-100-lead-and-cadmium-free" rel="nofollow noopener">CNC kitchen Heat Insert Set</a></li><li>Optional :<ul><li>1 * M4x8 Screw</li><li>1 * M4 nut</li></ul></li></ul>Assembling:<ul><li>Insert M3 brass insert (see red arrow below)</li><li>Use M3x8 screw everywhere except 1 * M3x25 (see orange arrow below)</li><li>Use 1 * M3x6 screw to lock the spring or elastic band</li><li>Use 2 M3x25 to mount the GT2 idle pulley</li><li>Insert M5 Nut (see yellow arrow below)</li><li>Make sure to run the belt before assembling the GT2 idle pulley</li><li>Use a small piece of adhesive tape to secure the belt on the arm mount (makes it so much easier to mount the belt on the sliding carriage)</li></ul><figure class="image image_resized" style="width: 79.45%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_86b4fd1a3ef78.png"></figure><figure class="image image_resized" style="width: 35.29%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_75b2c88e1b92e.png"></figure>&nbsp;Print settings:<ul><li>PETG for the soldering iron holder, other part can be printed in PLA</li><li>Layer height : 0.2 mm</li><li>No support</li><li>Print orientation as shown below :</li></ul><figure class="image image_resized" style="width: 54.24%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_75456e3a941b9.jpg"></figure>

Minimalist Heat Insert Press

tools

Hiro Koiso Racing

This model is designed to fit X1 and P1 series printers. HKR poop chute features interlocking leg to secure the chute to the printer body without extra hardware or magnets. ※Fitment Note: If you got X1, X1C and P1P in Feb 2023 and earlier (most likely built in 2022) , Your printer might have shorter legs than current version.  This can cause a printer to not sit level with the chute installed. How to tell if you have a early style short leg printer<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_177ad051bd84f.jpg"><figcaption>Print The chute and see if the round part of base can slid under the printer as pictured. If it goes like picture above, you have current style. no further action is required. If the chute base doesn&#39;t goes in, follow instructions. Scroll down for further information</figcaption></figure>  <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_0f1d75fb4cc6e.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_8219b55930c54.gif"><figcaption>Easy printing - It prints without support.</figcaption></figure>Removable bucket are easily access from front and available in 4 sizes.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_52e2e363fc345.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_ec5da20ffb566.gif"></figure> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_7002ac682aaca.jpg"><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model, please consider boosting it to support creator. 
Thank you!</boostcontent></boostme> 《Solutions for early short leg printers clearance issue 》 2 ways for fix - both methods raise the printer height to same as current version to correct clearance issue. So print whichever you prefer and install to an early style printer. (Files are available for download)<ol><li>Replacement TPU leg - Extended legs replace stock rubber feet. Print with TPU <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_ab7611200d584.jpg"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_5d39951f13735.gif">  </li><li>PLA spacers - PLA or whatever rigid filament material you used to print the chute would work. They fit inside the leg pockets, use with stock Rubber feet <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_ac0d4c15d6753.jpg"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_e325c22380ea.gif">  </li></ol>Tip for leg replacement:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_828fd7817fbe4.jpg"><figcaption>Bring a leg to the edge one by one to replace. So you don&#39;t have to lay printer on side.</figcaption></figure>&nbsp;&nbsp;Checkout more HKR printer accessories: <a target="_blank" href="https://makerworld.com/en/u/2567436854" rel="nofollow noopener">https://makerworld.com/en/u/2567436854</a>&nbsp;・HKR Stackable Build Plate Storage: <a target="_blank" href="https://makerworld.com/en/models/120963#profileId-130105" rel="nofollow noopener">https://makerworld.com/en/models/120963#profileId-130105</a><a target="_blank" href="https://makerworld.com/en/models/120963#profileId-130105" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_1f77d220d2196.jpg"></a>&nbsp;・Foldable AMS side mount spool holder - No Bearing: <a target="_blank" href="https://makerworld.com/en/models/145321#profileId-158083" rel="nofollow noopener">https://makerworld.com/en/models/145321#profileId-158083</a> <a target="_blank" href="https://makerworld.com/en/models/145321#profileId-158083" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_119fd552797b3.jpg"></a>&nbsp;・Foldable AMS side mount spool holder - with Bearings: <a target="_blank" href="https://makerworld.com/en/models/153090#profileId-167255" rel="nofollow noopener">https://makerworld.com/en/models/153090#profileId-167255</a><a target="_blank" href="https://makerworld.com/en/models/153090#profileId-167255" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_25f94a5385d15.jpg"></a>&nbsp;Happy printing!

HKR Interlocking Poop chute with removable bucket

bambu mods

Brad - FTBT 3D

I wanted a way to store my 80 piece Bambu Lab filament swatch samples in a clever and satisfying way. Most of the raising holders only held 40, raised swatches up uniformly, and used bearings. I wanted something that could be fully printed, no bearings. And this design raises the swatches up, then abruptly drops them down so you can really see the one in the front and grab it easily.You don't need Bambu Lab swatches for this, I've included a modeled up blank you can use and customize or label on your own.Print Settings:<ul><li>Top Layer Height: 0.20mm</li><li>Bottom Layer Height: adaptive or 0.10mm (for smooth ramp) </li><li>Top & Bottom Surface: Concentric</li><li>Print top upside down</li><li>Use Arachne wall generator for best results</li><li>As designed it will only turn clockwise, mirror base to turn counterclockwise</li></ul>For best turning:<ul><li>Sand the ramp smooth with 220 grit sandpaper if needed</li><li>Put rubber feet on the bottom so the base won't spin while turning the top</li></ul>