Shellie the Maker

PhaseworksCA

This model will just about print without supports, but the top will end up quite messy, and the lower features on the sphere may also post a spaghetti risk. The one pictured here was done without supports, but I have included the a version with tree supports applied only to the problem areas. To avoid potential failures I would recommend the support version.&nbsp;Celebrate the year of the dragon with this dragon themed lantern lithophane!I use some small LED puck lights off amazon, I've linked a couple of pages for them below.&nbsp;<a target="_blank" href="https://www.amazon.ca/gp/product/B09ZV1QW3J/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">Amazon CA</a><a target="_blank" href="https://www.amazon.com/Changing-Dimmable-Cabinet-Function-Bookshelf/dp/B09ZV187ZP/ref=sr_1_5?crid=361RRM2LQJ3GO&keywords=Laliled+Puck+Lights&qid=1704571786&sprefix=laliled+puck+lights%2Caps%2C529&sr=8-5" rel="nofollow noopener">Amazon .COM</a>&nbsp;The opening size of the sphere is pretty large though, and you could probably use a variety of different lighting options. This is just what I had available :)&nbsp;<figure class="image image_resized" style="width:100%;"><a href="https://www.printables.com/@PhaseworksCA/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/599320/2024-02-27_cbac20a9d0926.png"></a><figcaption> </figcaption></figure>

Year of the Dragon Lantern Lithophane

Lithophanes 

Madness3D

Optimized for 3D printing with a amazing depth of field.&nbsp;The Glowing series is optimized with 2 filaments for the most popping effect when matched with glow in the dark filament.&nbsp;It can be printed with either glow in the dark filament or with plain bambu lab green filament (without the glow in the dark effect)..&nbsp;There are 2 print profiles available.200x200 is optimized for x1c, p1s, p1p150x150 is optimized for A1 mini.&nbsp;Pictures can be printed with out AMS by following the print instructions below.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 4.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 15Swap Instructions: Start with Charcoal At layer #12 (1.04mm) swap to BambuLab Green for the rest.&nbsp;&nbsp;Art generated with midjourney and optimized for 3D printing with Hueforge.

"Glowing" - Rudolph 2

Glow In The Dark

Clucky

These are three variations of warning extruding signs I first made with Fusion 360 and then made in MakerLab. The signs that were made in MakerLab are precolored in the .3mf file and all three fit on one plate if you want to print all three. The MakerLab signs are the ones labeled in the photos as MakerLab signs. The non labeled signs are the ones made in Fusion 360. For the signs made in Fusion 360, printing with all three colors at .2mm layer height, you will want to swap filaments at layers 6 and 11. Who doesn't need an extruding sign for their bathroom?

Extruding in Progress Warning Signs

Signs

Big Plate Chicken

Damon Dragon is a very cute design. We combined it with popular AI painting to create an IP property 2024 Year of the Dragon figurine model. It's perfect for printing in the four colors of bambu's AMS or AMS lite because we have made the eyes, body, belly, etc., into segmented models, making it easy to modify their colors. We believe your children or girlfriend will love this design!&nbsp;Strongly recommend using AMS for multi-color printing, as it allows for arbitrary color adjustments. We have designed each independent area in segments, making it easy to modify the color blocks on its body.&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/ZVggmbuP4_8?feature=share"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=ZVggmbuP4_8"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/ZVggmbuP4_8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

Damon Dragon With Wings (PRINT-IN-PLACE)

Figurines 

B-Lab 3D

Hi, I needed to bring some filament onto <a target="_blank" href="https://eu.store.bambulab.com/it-it/products/ams-multicolor-printing" rel="nofollow noopener">AMS</a> compatible spools, I've seen excellent projects around but too complex and expensive, I don't want to waste filament, time and money buying bearings, screws or anything else.Simplifying as much as possible and without needing anything else apart from a printer, I designed this. Simplicity is fundamental for me! you can use the crank, or a screwdriver on the removable pin.WARNING: for the unwinding spool I use an open filament dryer, otherwise print the parts 2 times to have a complete setIf you are interested feel free to bring updates, I left&nbsp;<h3>consider this alternative with AMS Lite: <a target="_blank" href="https://makerworld.com/en/models/210974#profileId-230802" rel="nofollow noopener">AMS Lite Spool Winder by B-Lab 3D - MakerWorld</a></h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/180044/2023-09-23_d39d8535845b7.png"></figure>HAPPY PRINTING EVERYONE :D

Bambu Lab spools winder SIMPLIFIED !

X1 Carbon Mods

fay3dlab

Since my suspended millenium falcon was such a hit.. i was motivated to make more of them..This time i made the Suspended Imperial Star Destroyer.. the ship itself is modelled by nikoli2803 from thingerverse.. the circular frame is the imperial logo itself.. the whole frame i modelled it to look like the deathstar.. everything was done using Tinkercad.. The print comes in 5 parts..<ol><li>front ship</li><li>back ship</li><li>bottom clip</li><li>top left clip</li><li>top right clip</li></ol>The ship itself comes in 2 parts.. front and back.. and there are 3 clips to hold both side of the ship together.. the bottom clip will be the stand for the whole suspended star destroyer and the 2 clips works on any side..Its a bit tricky to assemble since you cant put both parts of the ship down since its suspended on the strings..<ul><li>so my suggestion is to put the bottom clip down on a table and then put the 2 parts into the clip..</li><li>it should fit snuggly together..</li><li>once the frame can stand on its own.. you can put the other 2 clips onto the frame..</li></ul>*UPDATE*I just made a new updated V2 of the suspended star destroyer.. with adding channel for LED light strips.. <img src="https://makerworld.bblmw.com/makerworld/draft/516824/2024-01-01_bdc509315a0c2.gif">you can download the new version here: <a target="_blank" href="https://makerworld.com/en/models/117449#profileId-126250" rel="nofollow noopener">https://makerworld.com/en/models/117449#profileId-126250</a>&nbsp;When printing suspended models.. one important thing to remember is to set the wall generator to arachne from classic.. this will make the slicer print the strings..I hope you guys have fun printing this suspended imperial star destroyer..

Suspended Star Destroyer

Sci-Fi

JamesThePrinter

This is volume 2 of my X1C faceplates. Volume 1 can be found <a target="_blank" href="https://makerworld.com/en/models/83940" rel="nofollow noopener">here</a>.Slide a faceplate over the X1C's screen to add personality to your printer! 4 versions are available:<ul><li>Plaid</li><li>Rainbow</li><li>Wooden Frame</li><li>Wavy</li></ul>&nbsp;Plaid, Rainbow and Wavy are all multi-color models. I have uploaded 3MF versions to make setup of the multi-color easier.&nbsp;Print SettingsSupports are required&nbsp;AssemblySlide the faceplate over the screen<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/263648/2023-12-13_d1mj9dg7ryij.png"></figure>&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:Plaid<ul><li>Bambu Lab Matte Scarlet Red PLA</li><li>Bambu Lab Matte Charcoal PLA</li></ul>Rainbow<ul><li>Bambu Lab Matte Scarlet Red PLA</li><li>Bambu Lab Matte Lemon Yellow PLA</li><li>Bambu Lab Matte Mandarin Orange PLA</li><li>Bambu Lab Matte Grass Green PLA</li><li>Bambu Lab Matte Marine Blue PLA</li><li>Bambu Lab Matte Lilac Purple PLA</li></ul>Wooden Frame<ul><li>Bambu Lab Matte Dark Brown PLA</li></ul>Wavy<ul><li>Bambu Lab Matte Marine Blue PLA</li><li>Bambu Lab Matte Ice Blue PLA</li></ul>

Bambu Lab Faceplates Vol. 2

Cool Stuuf

GlennovitS 3D

NEW EXCLUSIVE version available - enjoy!<a target="_blank" href="https://www.printables.com/model/691523-tactile-fidget-rings-premium-supporter-pack-spinni" rel="nofollow noopener">https://www.printables.com/model/691523-tactile-fidget-rings-premium-supporter-pack-spinni</a>The original Tactile Fidget Rings is tested by thousands! Now they are ready for your keys - to ensure that you always bring them with you! Rotating rings to fidget with on a commute or when nedded. Enjoy!<figure class="image image_resized image-style-align-right" style="width:392px;"><img src="https://media.printables.com/media/prints/735002/rich_content/6ca4c530-2ac0-4461-a040-d3b3db715e32/img_0094.jpeg#%7B%22uuid%22%3A%2282ed3566-3e45-4506-8569-a7f16baa1be5%22%2C%22w%22%3A4032%2C%22h%22%3A3024%7D"></figure>Print the different styles and find your personal favorite - and then give the other prints as gifts ;-)<h3>Overview</h3>The Tactile Fidget Keychain comes in multiple styles - just like the original Tactile Fidget Rings.<ul><li>Basic (just the rings - no textures)</li><li>Lines (tilted almost-vertical lines)</li><li>Knurled (for extra “grippynes”)</li><li>Layers (simulating thick 3D printing layers)</li><li>Honeycomb (hexagonal textures)</li></ul>If also comes in multiple MIX versions! In the mix versions, every ring has a different texture for you to enjoy. Which one is your favorite - please share and comment!<h3>Assembly</h3>None! This is print-in-place :-)<h3>Print instructions</h3>Here is a few ideas for slicer-settings:<ul><li>Speed on first layer: 50% (To ensure good bed adhesion take your time here!)</li><li>Supports: NO supports</li><li>Brim: NO brim</li></ul>Happy printing!<figure class="image image_resized image-style-align-right" style="width:392px;"><img src="https://media.printables.com/media/prints/735002/rich_content/440b364f-2f2a-4669-a9e2-3066f0f7dd0c/img_9201.jpeg#%7B%22uuid%22%3A%22dae65d85-ab82-44e3-8f9e-2129cfc86491%22%2C%22w%22%3A3997%2C%22h%22%3A2998%7D"></figure><h3>Related models</h3>You can try the Original too - without the hook for keychain.<a target="_blank" href="https://makerworld.com/en/models/65777#profileId-69112" rel="nofollow noopener">https://makerworld.com/en/models/65777#profileId-69112</a>OR you can try the Exclusive Supporter pack - both with normal and keychain version - and A LOT of extra textures. This also helps me create new models ;-)<a target="_blank" href="https://www.printables.com/model/691523-tactile-fidget-rings-premium-supporter-pack-spinni" rel="nofollow noopener">https://www.printables.com/model/691523-tactile-fidget-rings-premium-supporter-pack-spinni</a><h3>Want to show your support?</h3>You can see ALL my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>

Tactile Fidget Keychain (spinning fun rings toy)

Fidget Toys

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_yztq9u8cw9ql.png"></figure><h4>Dimensions (LxWxH)</h4>110 x 64,32 x 20,18 mm (100% scale)<h4>Basic information</h4>Trilobites have been extinct for quite a while now, so you most likely won't get the chance to hold one in your hand any time soon. Until someone brings them back to life, here's a good alternative!<h4>Files information</h4>I've included 1 file in the .stl format.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_zj8hmawflnb0.png"></figure><h4>Material</h4>PLA<h4>Layer height</h4>0,2 mm<h4>Infill</h4>>15%<h4>Support</h4>The model was designed not to require any support material.<h4>Scaling</h4>A well tuned setup should be able to print the model reliably at up to 50% scale, I wouldn't recommend going below that. If you're printing a downscaled version, you need to make sure, that the first layer adhesion is sufficient, as the contact area isn't exactly big, and it might cause issues.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>If your printer suffers from poor buildplate adhesion, consider using some kind of adhesion booster, such as adhesive spray or glue. The contact area is fairly small, and the print might detach otherwise.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_1vlcwoutsbqk.png"></figure>In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue was every specific update adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.If you run into any issues with the model, please visit the section of known issues, which can be found just below Updates and fixes. If you won't find your specific problem there, don't hesitate to contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_7qvyiugvs1b6.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_4fjxyiwkmug8.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm, and we will discuss details, terms and conditions, and your individual pricing plan.

Articulated Trilobite

Articulated/Flexi's

GamerForge

It´s a Cute Cat key chain. Multicolor compatible (AMS)

Halloween Witch Cat key chain

Key Chains

Tridense

Size: 240 x 167.8 x 1.5 mm, Scale it how you want! Uses AMS/ MMU to get the different colors Paint it in the slicer&nbsp;Print it lying face down for best results0.28mm layer height, 100% infill

BEWARE OF THE WITCH - Sign

Pagan

berri3D

For your tree trimming this year, here is a set of four spinning Christmas ornaments. The rings spin freely around familiar Christmas scenes: an evergreen tree, an angel, a snowman, and a cozy house.<ul><li>No AMS needed for multi-colour rings; they can be printed separately! Mix and match colours to your heart's content!</li><li>All ornaments are AMS ready and pre-painted</li><li>Solid colour versions are included as well and look just as good!</li></ul><h3>Trouble? Questions? Comments? Please don't hesitate to get in touch!</h3><h2>Merry Christmas!</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381938/2023-11-19_c8d27404379f3.png"></figure><h2>Printing Tips</h2><ul><li>Print Settings: My print profiles contain all my recommended settings (see below for more detail) as well as plates for:<ul><li>Full multicolour ornaments and rings</li><li>Separate multicolour scenes</li><li>Separate solid colour scenes</li><li>Separate Ring sets</li></ul></li><li>Filament: The ornaments look nicest when printed with Silk or Sparkle filaments (see About the Model below for brands/colours that I used)</li><li>Purge volumes: I've calibrated them to reduce waste, but you may need to recalculate for your own filament</li><li>Plate: A textured plate is recommended because of the texture it gives to the bottom of the ornaments. Be sure your plate is extra clean to ensure success because the rings have a small footprint.</li><li>Ironing: ironing makes the top surface look nicer but can add a lot of time to the print. Feel free to experiment with it if you'd like a better top finish.</li></ul><h2>Separating the Rings</h2>Separate the rings by rotating the ring (or scene) perpendicular to the rest of the ornament. Grab the edge and gently pull down. It should flex and release from the retaining hole at the top. To combine the rings, simply reverse the process.<h2>Print Settings</h2><ul><li>Elephant foot compensation: 0 (it helps the rings stick better because they already have a narrow footprint)</li><li>Wall loops: 4 (to make stronger rings surface)</li><li>Detect thin walls: On (fills in better)</li><li>First layer speed: 15 mm/s (helps things stick better and not be dragged)</li><li>Brim: none</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/381938/2023-11-19_c8d27404379f3.png"><h2>About the Model</h2>There's something magical about print-in-place models. Many a time I've shown someone a box with a hinge and they were amazed. “What do you mean it was printed in one piece?!?” Since I also love Christmas, I thought I would combine the two types of magic and create a kinetic ornament.<h3>Filament used in display models:</h3><ul><li>Red Silk PLA (Hello3D)</li><li>Jade Green Silk PLA (CC3D)</li><li>Glorious Gold (Spectrum)</li><li>White Silk (Hello3D)</li></ul><h2>How to Support Me</h2>If you like what I make, I would love it if you would please click the like button and/or download a print profile. If you really like what I make, then please consider<a target="_blank" href="https://ko-fi.com/berri3d" rel="nofollow noopener"> buying me a coffee</a>. Thank you so much!<h2>Licensing</h2>These models are non-commercial and may not be sold, reproduced, or shared outside of this website. However, I will consider an individual license fee if you wish to sell printed models in your local area such as at a craft show. Please contact me for details.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381938/2023-11-19_c8d27404379f3.png"></figure><h2>Changelog</h2>January 9, 2024<ul><li>Updated description to align with changed MakerWorld TOC</li></ul>December 1, 2023<ul><li>Updated profiles to fix Angel painting</li></ul>&nbsp;November 23, 2023<ul><li>Updated cover photo</li><li>Typo fixes</li></ul>&nbsp;November 22, 2023<ul><li>Added PrusaSlicer .3mf to Raw Files</li></ul>November 21, 2023<ul><li>Initial upload</li></ul>

Spinning Christmas Tree Ornaments

Yule

3DPmom

Here is a family of stretchy ghosts that are more fun than spooky 👻 In my print profile I have arranged them as follows:&nbsp;Plate #1: Small, Middle, and Large Ghosts, (2 colors, white & black)Plate #2: Large Ghost (2 colors, white & black)Plate #3: Middle Ghost (2 colors, white & black)Plate #4: Small Ghost (2 colors, white & black)&nbsp;I placed all three ghosts on plate #1 to economize the amount of waste purged (it's more efficient to print 3 ghosts at once than one at a time). There will be more filament purging with this print as the color changes from black to white. I have tried playing around with the flushing settings but found if I didn't purge the black enough it caused my white to look more gray around the eyes:( If you would like to print one at a time, I placed them separately on plates #2, #3 and #4.&nbsp;Note: When you go to preview these slinky's in Bambu Studio you will get a warning that states: “Warning: It seems object POG Small (or Large) Slinky has floating cantilever. Please re-orient the object or enable support generation.” You can ignore this warning. The program is recognizing the space between each layer of the slinky. That ‘space’ is intentional and necessary to be able to separate the slinky when it is done printing. It will print fine without supports:)&nbsp;3D PRINTING SETTINGSLayer Height 0.2mmPLA works greatNo Supports needed.15% InfillDimensions of Large Ghost: 3 in. x 2.5 in.Dimensions of Middle Ghost: 2.5 in. x 1.5 in.Dimensions of Small Ghost: 1.5 in.x 1.25in.&nbsp;After you print each ghost, the layers that will be lightly connected together. Gently separate them with your fingers or a non-sharp object like a butter knife:)&nbsp;Have Fun Printing:)