bluedemon1289

tjhoven74

This is the Batarang that the Dark Knight uses, you may need supports with this as it has large overhangs.

Dark Knight Batarang

Office

Hart 3D Prints

Very Helpful and if you use a good color filament makes your desk look way better. You can print the drawers all as one or separate.You don’t need supports onInfill any higher than 15&nbsp;If you want to have a monkey pen holder next to it <a target="_blank" href="https://makerworld.com/en/models/249433?from=search" rel="nofollow noopener">click here</a><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000249384/design/2024-03-13_233f8de7761b9.webp">

Desk Organizer

JulesPrint3D

HAVE YOU TRIED TURNING IT OFF AND ON AGAIN?IT Office Sign / IT Crowd Sign / Tech Support Helpdesk Sign dimensions: 175 x 95 x 1,6mm Perfect for IT-Office Model is Scalable_________________________________________________________________EDIT: Added face down profile for better finish. (AMS required)_________________________________________________________________ You don&#39;t have AMS?Set Layer 1-5 Black, Layer 6-8 White Slice the model first, on the right side where you can move the layer line up and down, right click on the ‘+’, filament change, then reslice.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000176376/design/2024-02-09_5aed3162f3a93.jpg"></figure>

IT Office Sign / IT Crowd Sign / Tech Support 

Work

Akio-42

<h3>Update Dezember 2023:</h3>I got a lot of requests of people who don't like to use Fusion360 so I added .stl files for bins from 1x1 to 7x7. Each size is available in 3U, 4U, 5U and 6U heights. And all files are available for 6x2mm and 6x3mm magnets.&nbsp;If you still want to have a different size bin there are instructions how to use the parametric Fusion360 file below. You just need to scroll down ;)To find the right size the files are named as follows: depth x width x height<figure class="image image_resized" style="width:57.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326738/2023-12-29_f5e918155ca97.png"></figure>&nbsp;----------------------------------------------------------------------------------------------------------------&nbsp;This is a remix of the original bins by Zack Freedman that you can find here: <a target="_blank" href="https://bit.ly/ZFGridfinityDividerBins" rel="nofollow noopener">https://bit.ly/ZFGridfinityDividerBins</a>Outer dimensions of the bins are exactly the same as the original bins, so you have full compatibility to the gridfinity system.<h4>Improvements of this remix over the original model</h4><ul><li>The label tab is always as wide as the bin. This helps with lifting the bin easily and allows for more text on the label for wider bins.</li><li>The magnet holes have an improved design. They now print clean without support. I found that the magnet holes of the original bins did not print great and I had to clean a lot of them manually before being able to put in the magnets.</li><li>A completely redone parametric Fusion 360 file is included, that enables you to easily create the basis for your own bin design.</li><li>For ease of use of the Fusion 360 files dividers are not supported.</li><li>Guide to use the parametric Fusion 360 file - see the description below.</li></ul><h4>Magnets</h4><ul><li>The provided stl files come either with holes for 6x2mm magnets or 6x3mm magnets. Both versions have advantages and disadvantages.<ul><li>The 6x2mm magnets are usually a bit more expensive and hold less strong to the baseplates, however they don't interact that easily with the contents of your bins, when stacked on top of each other.</li><li>The 6x3mm magnets are usually a bit cheaper to get and when using only 2 of them on a bin you can get roughly the same holding force as with 4 6x2mm magnets. However they also interact more with the contents of your bins, when the content is magnetic or ferromagnetic.</li></ul></li></ul><h4>Accessories</h4><ul><li>The bins with the magnets go great with my version of the modular baseplates that can be equipped with ferromagnetic screws. This is cheaper than having to put magnets on the baseplate and you don't have to get the polarity of the magnets right. You can find the baseplates here: <a target="_blank" href="https://makerworld.com/en/models/25571#profileId-44132" rel="nofollow noopener">https://makerworld.com/en/models/25571#profileId-44132</a></li><li>The bins with also go great with my gridfinity tray. When using it you have a separating layer between the bins, that prevents the stronger 3x6mm magnets of interacting with magnetic content of the tray below. You can find the tray here: <a target="_blank" href="https://makerworld.com/en/models/25576#profileId-44175" rel="nofollow noopener">https://makerworld.com/en/models/25576#profileId-44175</a></li></ul><h4>Parametric source file</h4>The original parametric fusion360 file that Zack created did not work for me for bigger bins. I got errors and the final bin consisted of several objects. After hours of searching for the reason I found out that this is a bug/missing feature in fusion360. Fusion360 can only combine as many objects as were existing during the initial creation. The original file seems to be created with a 1x3 bin. That means there are problems for all bigger bins. So I re-created the fusion360 file with a bin size of 10x10. This means you will be able to create bins from 1x1 to 10x10 without errors. I decided to have the same parameters as in the original file to make it easy for users of the existing file from Zack to use this.Parameters to change without problemsThe following parameters can be changes within the given value ranges without causing problems with the provided fusion360 file.Note that you not only can add nubmers, but also fractions as parameters. This is useful for the slotsHigh parameter. In the original fusion360 file slotHigh “1” creates a 6U high bin. So if you want to easily have a bin with a specific gridfinity xU hight, you can just put in x/6 as the parameter.Changing other parameters than in the table below might work, but I did not test it.Fusion360 might need a while when you go for huge bins.<figure class="table"><table><tbody><tr><td>Parameter</td><td>Value</td><td>Description</td></tr><tr><td>slotsWide</td><td>1-10</td><td>width of the bin</td></tr><tr><td>slotsDeep</td><td>1-10</td><td>depth of the bin</td></tr><tr><td>slotsHigh</td><td>3/6 - 10/6</td><td>height of the bin</td></tr><tr><td>magnetThiccness</td><td>2.4 - 3.4</td><td>2.4 for 6x2mm magnets3.4 for 6x3mm magnets</td></tr></tbody></table></figure>Remove Magnet holesIf you do not want magnet holes on the bottom of the bin there is an easy way to remove them:Set the parameters screwTightDiameter and magnetDiameter to 0.01. This will not cause errors in the parametric file and make the holes so small your slicer will not recognize the holes any more.How to change parameters in fusion360<ul><li>Click on Modify>Change Parameters</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326738/2023-09-27_oxquc1j593mo.png"></figure><ul><li>In the column Expression change the value of the parameter</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326738/2023-09-27_522fbr1n7t9p.png"></figure><h4>Warnings</h4>The file will give you a warning for bins with a size less than 10x10. This is normal and expected.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326738/2023-09-27_3qkdwheewu07.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326738/2023-09-27_hjx80ggb1hz0.png"></figure>

Gridfinity standard bins with label + parametric file

Gridfinity

Think3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.Start with Black At layer #8 (0.72mm) swap to Blue At layer #11 (0.96mm) swap to OrangeAt layer #17 (1.44mm) swap to White for the rest.&nbsp;&nbsp;170x170 Version:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #12 (1.04mm) swap to Blue At layer #15 (1.28mm) swap to Orange At layer #21 (1.76mm) swap to Jade White for the rest.&nbsp;___________________________________________________________________________________If you like my work, please consider a small donation :) Thank you very much :*<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8</a>&nbsp;

Goku Dragonball - HueForge

HueForge

Spenny

Swap Instructions: Start with Black At layer #2 (0.24mm) swap to Red At layer #8 (0.72mm) swap to Orange At layer #16 (1.36mm) swap to White Note: If you are using the raw stl without the God of War logo, skip the below swaps At layer #27 (2.24mm) swap to Black At layer #68 (5.52mm) swap to Red for rest

God of War Kratos Portrait - Hueforge

Tyler

3D Prints This Week

Load blue and black into AMS.&nbsp;If you don't have ams, color change is at layer 5&nbsp;&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)

Pokemon Do Not Disturb / Kids Room / Squirtle

Adam

Only two colors&nbsp;Load black and white into ams&nbsp;Color swap is at layer 7.&nbsp;Start with black

One Piece / Zoro / Wanted Poster / HueForge / 

One Piece

Prestige Prototype

V02- Centered to stock PTFE filament Guide*For those with a little more space behind their printer&nbsp;Introducing the Minimalist Side Spool Holder for Bambu Lab Printers (P1P, P1S, X1C):&nbsp;Enhance your 3D printing setup with our sleek and functional Side Spool Holder, custom-designed for Bambu Lab P1P, P1S, and X1C printers. This minimalist accessory offers a clean and modern aesthetic, seamlessly integrating into your workspace. Utilizing the original PTFE guide ensures a smooth and reliable filament feed for uninterrupted printing.&nbsp;Crafted for simplicity and efficiency, this side spool holder requires only 2x M3x30 screws and 2x 608 ZZ ball bearings (8mm x 22mm x 7mm) for assembly. The minimalist design maintains the sleek look of your Bambu Lab printer while providing a practical solution for spool management.&nbsp;Upgrade your 3D printing experience with our thoughtfully engineered side spool holder. Embrace the ease of installation, the clean aesthetics, and the improved functionality it brings to your Bambu Lab printer.

Office

Office

Work

Gridfinity

HueForge

Tyler

Adam

One Piece

first prints