TheBlake

plomdawg

Surprised Pikachu in magnet and keychain form!&nbsp;Be sure to print in the correct color order (it should be set in the profile already): black → yellow → white → red &nbsp;&nbsp;The magnet holders are designed to press-fit 6x2mm magnets - can be found on Amazon (or AliExpress for cheaper). I use a rubber hammer to mash them in.

Surprised Pikachu (magnet and keychain)

Magnets

Scattered Collectables

The New and improved version of my printable Brembo coaster set, which i originally designed in June 2022for rights to sell prints visit https://www.patreon.com/ScatteredCollectables&nbsp;- Improved overhangs for better print quality- Better fitment of the coasters so they don't lean- A more accurate logo- Added drain holes for any liquid to escape- New Coaster piece with no hole, as requestedAssembly is easy, just print all of the pieces, and glue the 4 printable bolts into the holes, or use M4 bolts for a more authentic look.&nbsp;I have also added STL files for a Caliper which is blank, and two separate logos which can be printed in multicolour if you wish to make the Brembo words a different colour like seen here in this picture below<img src="https://makerworld.bblmw.com/makerworld/draft/467410/2023-11-11_1411f2cae5a36.png">

Brembo Coaster Set *Improved* 

Functional

WizPrint3D

Step into the world of nostalgia with this 3D model capturing the unforgettable moment of choosing your starter Pokémon in Pokémon Red/Blue. Relive the excitement of selecting between Bulbasaur, Charmander, and Squirtle as your first companion on your journey through the Kanto region. This wallart brings back all the feels of those childhood adventures, making it a must-have for any Pokémon fan!&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.&nbsp;Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Silver At layer #11 (0.96mm) swap to White At layer #17 (1.44mm) swap to Red for the rest. Optional frame included.&nbsp;If you want to support me and are interested in selling my models, please visit:&nbsp;<a target="_blank" href="https://www.patreon.com/WizPrint3D" rel="nofollow noopener">https://www.patreon.com/WizPrint3D</a>&nbsp;Check out my latest Pokemon Iconic Moments series models!&nbsp;<figure class="table" style="width:98.44%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><a target="_blank" href="https://makerworld.com/en/models/422650#profileId-325759" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/863180/2024-04-12_3c9ccd87edd34.jpg"></a></td><td><figure class="image image_resized" style="width:48.68%;"><a href="https://makerworld.com/en/models/419858#profileId-322546" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/863180/2024-04-12_23bebe8ce5939.jpg"></a></figure></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/430719#profileId-335256" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/863180/2024-04-16_9c1b5c09c0523.jpg"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/430725#profileId-335261" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/863180/2024-04-16_7d0521f4ccfeb.jpg"></a></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;

Pokemon Iconic Moments - Choose your starter

Wall Art

Williams Industries

Had a lot of requests for this! My apologies for the washed out image. I am working on a set of various images to upload here for all to use for the different cart sizes, so stay tuned for that.&nbsp;For personal use, commercial use in the Patreon below. For the art, I just used <a target="_blank" href="https://amzn.to/3TBdswu" rel="nofollow noopener">THESE</a> holographic sticker sheets (affiliate link)&nbsp;Example images are here: https://www.patreon.com/posts/101523522?pr=true&nbsp;Check out my other gaming art pieces.&nbsp;<figure class="image image_resized" style="width:54.41%;"><a href="https://makerworld.com/en/models/252349#profileId-268719" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/820365/2024-04-01_70ceaadb0f41b8.webp"></a></figure> <a target="_blank" href="https://makerworld.com/en/models/252318#profileId-268688" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/820365/2024-03-13_fa01553249456.jpg"></a>&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>We release about 30 files a month. Patreon membership includes commercial use on all prints.<figure class="image"><a href="https://patreon.com/WilliamsIndustries?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/820365/2024-03-13_967b85ee2294b8.png"></a></figure>&nbsp;

NES Keychain

Keychains

Neebick

Update: I have added a <a target="_blank" href="https://makerworld.com/en/models/146363#profileId-159384" rel="nofollow noopener">scabbard</a> that is designed for this Master Sword.&nbsp;This one was a fun project to see if I could make a master sword that would could be all encompassing for its appearances in Tears of the Kingdom. The party trick being that the center jewel acts as a locking peg for which ever blade is inserted. It's modeled with a tight tolerance so that it will friction fit in. Just press the center of the jewel and the peg will slide out. This allows the blade to be removed. My idea was that this would be more convenient then printing and finishing 3 different hilts for each blade. Storage should be easier as well. Plus its just cool.&nbsp;Glue and supports will be necessary for some parts.&nbsp;I have kept tolerances tight on some parts to help with friction fitting. I've found the blades need a couple insertions before it becomes easier. I figured this was better then a wobbly blade.&nbsp;<h3>Parts</h3><ul><li>Blades - Each blade is designed to be printed upright on the plate. You will need 2 center portions to make a full length blade. I have included pegs which should be glued to join all the sections. I suggest thick walls. I print with 5 walls for good measure. Really helps with flex. Use supports for the peg holes. On the restored blade, I did not include a tip since it is the same as the original blade.</li><li>Cross guard - I have sliced this 2 ways: Sideways for more vertical printing. Excellent cooling is a must. I had very slight sagging towards the top of mine due to the sharp angles of the tips. Or sliced in half for a wider print but easier details if bed adhesion and warping isn't an issue. Supports are a must for both. Focus on the interior portions and tips.</li><li>Grip - Simple part. Print with flared portion on the plate. Make sure to glue it with the cutout portion facing forward. Important for the wrap to be aligned with the cross guard.</li><li>Wrap - This is was a trickier part for me since it kept coming loose from the bed. It doesn't have a very wide base so bed adhesion is critical. Supports and brims help. Has a built in peg to lock it into the proper orientation.</li><li>Jewels and Blade surrounds - Super easy print. Glue peg into jewel with inset on the back. Glue surrounds on cross guard.</li><li>Pommel - Two parts for nicer printing. Use grip to help align while gluing halves together. Can remain removable with future upgrades...</li></ul>&nbsp;<h3>Video Demonstration</h3><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=AtKNojgwpLE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/AtKNojgwpLE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Master Sword with interchangeable blades from Legend of Zelda Tears of the Kingdom 

Large Models

PrintBrothers3D

Its a Remix from AKinferno remix :) you find the original on Thingi ID 5383489.The original cames from WheatlyLaboratories Axolotl and McGybeer's "Articulated Lizard" and the head comes from “Schlossbauer” Axolotl.&nbsp;Its painted in Slicer for you - so happy printing in colors … we scaled z up to 150% because the original was to flat :) &nbsp;Cheers BenniPrintBrothers3D

Magnets

Functional

Wall Art

Keychains

Large Models

Small Novelties

Random