blake.adams.itpro

ashandrose

Here is a fun way to show yourlove for the Irish… or at least for their holiday, by printing them a cute shamrockwith flexi legs. This clover makes a fun toy or even looks good on a shelf. Maybe it will even bring some luck into your house! There are two versions of this model: one is just a shamrock and the other has the word “lucky”across of it. Print one, print both, just print!

Clover with Flexi Legs

St Patty’s

DrJones

A quick, small and simple, yet nice trophy cup in spiral vase mode that only needs 4g of filament.It's only 66 mm in height, but you can scale it up. If you scale up significantly I recommend increasing the line width, too. Or, if even bigger, deactivate vase mode and set walls to 2 or 3, and increase bottom layers.&nbsp;A simple base is included as stl (rectangular cuboid, vase mode), a nicer <a target="_blank" href="https://makerworld.com/de/models/110830" rel="nofollow noopener">round base is here</a>.You can emboss text there, but making a small two-color name/inscription plate probably looks better. I actually used a label printer (with gold on black tape).&nbsp;More quick vase mode trophy models: <a target="_blank" href="https://makerworld.com/models/110844" rel="nofollow noopener">Trophy with triangles</a> (this one)<a target="_blank" href="https://makerworld.com/models/110855" rel="nofollow noopener">Trophy with a twist</a><a target="_blank" href="https://makerworld.com/models/110797" rel="nofollow noopener">Round trophy</a><a target="_blank" href="https://makerworld.com/models/110914" rel="nofollow noopener">Straight hexagonal</a><a target="_blank" href="https://makerworld.com/models/110830" rel="nofollow noopener">round trophy base with hidden compartment</a><a target="_blank" href="https://makerworld.com/models/126236" rel="nofollow noopener">Lowpoly</a>

minimalistic small trophy (vase mode)

Low Poly Favorites

The3DSportsBeard

Saw this meme and had to turn it into a bathroom sign. Maybe this reminder will help improve the cleanliness of my bathroom? <a target="_blank" href="https://makerworld.com/en/u/670836357/collections/810694" rel="nofollow noopener">Check out my other Star Wars themed designs here.</a> Commercial license available here: <a target="_blank" href="https://www.patreon.com/The3DSportsBeard" rel="nofollow noopener">https://www.patreon.com/The3DSportsBeard</a> Appreciate my designs? Buy me a beer: <a target="_blank" href="https://buymeacoffee.com/the3dsportz" rel="nofollow noopener">https://buymeacoffee.com/the3dsportz</a>

Funny Stormtrooper Bathroom Sign - Aim Like a Jedi

Misc

HpInvent

Here's a cute Bunny/Rabbit for you to print ;) Scale it to your liking. Unfortunately it should be printed with supports. Havent tried it without support, maybe it works. But for the best result you should use the support.It printed very well with the support wich removed easily as you can see in the pictures!&nbsp;Perfect for coloring with the children for Easter ;)&nbsp;Don't forget to print his cute little friends and my other models: <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a> There you can finde more cute animals ;)  <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/662408/2024-03-08_a8a626fc04c78.png"></a> <a target="_blank" href="https://makerworld.com/en/models/194458" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/662408/2024-02-23_539193d8507ba.png"></a><a target="_blank" href="https://makerworld.com/en/models/210984" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/662408/2024-02-28_8818bd98777e4.png"></a><a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/662408/2024-02-27_c1e7b8a459e5d.jpg"></a><a target="_blank" href="https://makerworld.com/en/models/232706" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/662408/2024-03-06_ea517b7dbe741.png"></a>Happy printing!

Cute easter Bunny Rabbit lying on back sculpture / Süßer Osterhase auf dem Rücken

Easter

Poli27

The picture can be made colorful with several colored burners!Model It is a wall picture or table decoration that also lights up and is suitable as a Christmas gift. It's something everyone can enjoy! To complete and illuminate the painting / decoration, you will need electric flashlights. Before printing, see the printing instructions. Printing instructions The Wolf in forest is printed in several parts. The size is 13 cm and the height is 5.4 cm. Orientation when printing should be placed on the mat with the flat side. It is designed for printing without supports. The Wolf in forest image is printed with a layer height of 0.2 and 0.4 nozzle with 100% straight fill and 1 perimeter. In the picture I used vanilla white filaments. Wolf in the forest needs to be folded. All parts are marked with a number and between each part it is necessary to insert a ring, which needs to be printed 13 pcs. The model can be proportionally reduced or enlarged! <a target="_blank" href="https://vi.aliexpress.com/item/1005005832798620.html?spm=a2g0o.cart.0.0.492d38dakVfgTI&mp=1&gatewayAdapt=glo2vnm" rel="nofollow noopener">Aliexpress lights : 1M 2M 10M 20M 30M Copper Wire LED String Lights Holiday Lighting Fairy Garland for Christmas Tree Wedding Party Decoration - AliExpress </a>

Wolf in forest

Wolves

dangles_

VERSION 2Changes made to the main design and have been confirmed to be sturdier and easier to get the blade in. Old versions have been removed and print profiles for main model and shorter model have been added. Version 2 also includes a “push stick” in the profile to help safely install the blade. &nbsp;About the ModelCuter that makes cutting those annoying sheets of Christmas gift paper rolls smoother and cleaner. &nbsp;PartsDesign is based around a #11 Hobby Blade. Packs of a lot of these can be found on amazon for very cheap. &nbsp;AssemblyOnce printed and blades have been acquired, you can *carefully* slide a blade into the slot. Using the printed “push stick” to push the blade further in. The lower hole is designed to allow you to use a small screwdriver to pull the blade down into place (as well as take it out).

Wrapping Paper Roll Cutter (VERSION 2)

Christmas

maxaruta

One of the most beautiful games of my childhood! the use of hairspray is strongly recommended!

PinPression Board - Slicer Destroyer

Toys

AmaanV

Spice up your Halloween decor with the customizable Halloween tealight lantern. To assemble a lantern, you will need a top part, a base and 4 side panels. I have provided 4 side panels (see the pictures) as well as a blank panel in the STEP file for those that want to create their own design. The side panels fit quite snugly into the base and top, and a drop of superglue into the grooves will ensure that it stays together permanently (one of the provided panels with the bat and pumpkins allows enough space to get a tealight in after assembly).&nbsp; Download the files, print your lantern, and let your imagination run wild. Create the perfect atmosphere for your Halloween festivities with a spooky lantern that's uniquely yours!Make your Halloween unforgettable - one panel at a time.

Customizable Halloween Lantern

Halloween

spank7

Making my childhood memories come true , i found from thingverse and printed the Sword of Omen from thundercats and now only need painting.I printed at 0.2 Pla Grey from Esun and i am quite happy with the resultsEnjoy

Thundercats Sword of Omens (Full Power)

Props

Sscigg

I couldnt find an acceptable eye lens that was printable so I made a quick mesh thats able to be seen through but covers the eyes fairly well.&nbsp;Printed fairly stock settings, just changed to 99 walls and 0%infill. Supports added to keep from knocking off buildplate.&nbsp;Tried to print laying down and missed alot of spots.

Mask Perforated Lenses

Helmets

Frikarte3D

<div><h1>Summary</h1><div>This is a remix of <a href="/Miketastic" rel="nofollow">Miketastic</a> - <a href="/thing:4038610" rel="nofollow">Beskar Ingot with Damascus Pattern</a> to display my Mandalorian ingot and coin. It's printed with <a href="https://s.click.aliexpress.com/e/_AsyiSZ" rel="nofollow">Silver Silk PLA</a> in vertical position without supports.Want to know what's behind this model? Read this post! <a href="https://frikarte3d.blogspot.com/2022/02/the-mandalorian-coin-ingot-display-3d.html" rel="nofollow">The Mandalorian Coin Ingot Display - 3D Print</a></div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender 3 Pro</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0.12</div> <pre><code> Infill: <div>5-20%</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=SUNLU+Silk+PLA" target="_blank" rel="nofollow noopener"> SUNLU Silk PLA </a><pre><code> Metal Silver Notes: <div>If you want great finish on the damascus pattern you must print it vertically. </code></pre>If you want more weight, you can print it hollow and the fill it with ball bearings with glue, sand or whatever you want. </div>

The Mandalorian Coin Ingot Display

Mandalorian

wuguigui

<h2>Summary</h2>I designed a 3D print clip without spring, the separated jaw mouth could be optionally chosen according to different usage.This design had another important function is to put pressure on the jaw mouth constantly, so it will not be loose like other 3D print clips.I recommend PETG as the filament because it has better toughness, not bad when using PLA+. But I haven't tried ABS yet, someone could help to do it.If you like it, please click "like“ it:)Thank you!A new one was designed based on this clip, with suction cup: <a target="_blank" href="https://makerworld.com/en/models/12904" rel="nofollow noopener">https://makerworld.com/en/models/12904</a><h2>Print Settings</h2>Printer: snapmaker 2.0 A250 Rafts: No&nbsp;Supports: No Resolution: 0.2&nbsp;Infill: 60% Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&field-keywords=snapmaker+PETG+or+PLA%2B" rel="nofollow noopener"> snapmaker PETG or PLA+ </a> any

Clip

Misc Tools & Gadgets

capsel22

Quick print of a PTFE clip which goes on the cable chain. Prevents the tube hitting the top glass or ams etc.&nbsp;Printer 0.2 layer heigh with 3 walls. Suggest printing it with PETG at minimum.&nbsp;It's designed to be tight fit. I found other designs to have either the PTFE cut out too large and the tube would come out or the lips holding the cable chain to be too small, and it clips off.&nbsp;To fit it, insert the top first onto the cable chain.