big.blue.1932

jdlg2065

Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm. Also, use a brim to prevent lifting in corners.Filaments Used(Try to use similar colors to match my print): Black - Hatchbox PLA Dark silk blue - Generic PLA Light blue - HatchboxPLA Orange - Hatchbox PLA Yellow - HatchboxPLA White - Hatchbox PLA Filament Swap Instructions: Black until layer #9 at 1.8mm Dark blue until layer #12 at 2.4mm Light blue until layer #13 at 2.6mm Orange until layer #14 at 2.8mm Yellow until layer #16 at 3.2mm White for the rest. Note: If resizing STL, leave STL's z-height the same.

The Starry Night - HueForge

Stag 3D

<h2>Who ya gonna call?</h2>Get ghost bustin’ with this life-size replica of the Ghostbusters Ghost trap, featuring opening doors and decor matching the original. &nbsp;The perfect print for fans of the Ghostbusters franchise.&nbsp;Assembly<ol><li>Push fit the handle into place</li><li>Place the hinges over the pins on the doors and then push fit into place</li><li>Choose your desired location for the outer decals and superglue them into position</li></ol><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442199/design/57413873-da4c-42b5-9a1e-4504ef9ec6a2.jpg"></figure>&nbsp;

Ghostbusters Ghost Trap

Halloween

quartzy

I made a heart shaped holder as a gift for my mother

cotton holder heart

Home Decor

giamma933

I SUGGEST BLUE SILK FOR SHINING EFFECT OR REPLACE WITH BLUE MARINE MATTE BAMBU &nbsp;File is ready to print, if u want to change frame color swap LASTS layers&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Silk Transmission Distance: 2PLA Bambulab gold Transmission Distance: 5PLA BambuLab Basic Jade White Transmission Distance: 5&nbsp;Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Blue SILK At layer #11 (0.96mm) swap to GoldAt layer #15 (1.28mm) swap to Jade White for the rest.&nbsp;Reminder:My models mostly cover the entire bed, this means the purge line is sometimes running through the bottom of the print. You have 3 options here: - Leave as is, you can just cut them of afterwards. - Remove immediately after the purge line is printed. - Scale the model:*** WARNING *** WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT! The Z-height must always be as original, otherwise the print is messed up. If u want to support my work &nbsp;<a target="_blank" href="https://www.paypal.com/paypalme/MarcoMaineri?locale.x=it_IT" rel="nofollow noopener">https://www.paypal.com/paypalme/MarcoMaineri?locale.x=it_IT</a>&nbsp;&nbsp;For request send me dm

HOGWARTS VAN GOGH STYLE. HARRY POTTER HUEFORGE 

Pictures

Stick Force

<h2>Compact print-in-place garden tool mount</h2>UPDATE: Now available as a parameterized OpenSCAD model that you can customize directly on MakerWorld!&nbsp;The mount is parametric and can be customized for exactly the size you need.&nbsp;I recommend using at least 3 wall loops and 25% gyroid infill for adequate strength and be careful when mounting the mount as too much screw force may split the layers.&nbsp;The model from OpenSCAD works with the tolerance set to 0.2 mm on my X1C when printing with Bambu PLA. The latch requires a bit of force to loosen at 0.2 mm tolerance and the hinge can use a bit of exercise before running a bit more easy. The tolerance set to 0.3 mm results in significantly smoother latch movements and easier first release. I would recommend 0.3 mm tolerance and the latch might still require a little wack with something to loosen.&nbsp;Other improvements on the new OpenSCAD model includes a strengthened hinge pin.<h2>Assorted sizes print profiles</h2><h3>Naming and file structure</h3>The files are structured with objects named as: &lt;toolWidth&gt;x&lt;toolDepth&gt;x&lt;height&gt;H-&lt;screwDiameter&gt;mm@&lt;tolerance&gt;mm&nbsp;And plates named according to screw diameter. Each plate contains the same tool width and 6 variations of tool depth.<h3>Printing on Bambu Handy</h3>When printing directly from the Bambu Handy app, please make sure that you only print the variant that you want.&nbsp;<ol><li>Select the plate by screw diameter. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000025016/design/2024-06-13_af59b73884879.png"></li><li>Select the variant on the plate that you wish to print: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000025016/design/2024-06-13_6ef7c4290f128.png"></li></ol>&nbsp;

Garden Tool Mount

Organization

technerd

I&#39;ve made a cute shadow box from Basic PLA for valentine&#39;s day with various designs for the couples. Choose which couple you like most and put a total of 6 inserts (textured side facing down) into &#34;case_front&#34;. They have numbers from 001-006 on the build plates, and should easily slide down into the casing.&nbsp;Depending on which lights you want to use, USB or battery powered you can put fairy lights through the hole of &#34;case_back&#34; and fix them with some tape or use the pegs that are around the hole to form a circle. Check the photos for details. Fix the battery box with double sided tape into it&#39;s place. I bought a 3 meter fairy light (warmwhite) that uses 3x AA batteries so they last way longer than the version with the button cells. For the Amazon link to the warmwhite or RGB fairy lights - scroll all the way down.&nbsp;UPDATE 2024-03-27: created a collection with all my available inserts for the shadowbox. They can be combined with each other <a target="_blank" href="https://makerworld.com/en/@technerd/collections/962148" rel="nofollow noopener">https://makerworld.com/en/@technerd/collections/962148</a>&nbsp;UPDATE 2024-02-12: included STEP files for “007_diy_empty_insert” and &#34;case_back_003_RGB_fairy_lights&#34; if you want to create your own inserts in Fusion360 or change the backplate to fit your own lights.&nbsp;UPDATE 2024-02-02: new “case_back_003_RGB_fairy_lights.stl” now compatible with both models 3m/10ft &amp; 5m/16ft RGB fairy lights - I made the pegs longer &amp; bigger circle diameter to fit the bigger battery box from RGB lights.&nbsp;UPDATE: Btw. you can also use RGB fairy lights - here is what they look like in different colors:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-01-26_002518b3be6b18.jpg"></figure>&nbsp;Print the &#34;case_cap&#34; 2x and slide them over the front and back of the heart. They&#39;re press fit and should stay in place, if not use some drops of glue or double sided tape. The overall size of the box is 215mm x 215mm.&nbsp;For perfect results make sure to use the golden textured PEI plate and calibrate your filament.Check out the Youtube Video below on how to assemble it.&nbsp; Copyright:All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds. If you want to sell my prints commercially and legally, you can join my Patreon: <a target="_blank" href="https://www.patreon.com/technerd863" rel="nofollow noopener">https://www.patreon.com/technerd863</a> The digital files (STL and other formats) may never be resold, shared, remixed or given away.&nbsp;&nbsp;I will try to add new inserts for the box from time to time. Just check my profile or my collections for new uploads like the new castle Neuschwanstein inserts. Until now these are the included designs here. Happy printing!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-01-25_167328f55390e.jpg"></figure>&nbsp;Btw. these are the fairy lights (warmwhite and RGB) that I got from amazon. Size of the battery box is 74mm x 51mm x 19mm. It has an integrated timer and stays on for 8 hours, so the 3x AA batteries should last 1-2 months. &nbsp;3M warmwhite <a target="_blank" href="https://amzn.to/3V6ZIdr" rel="nofollow noopener">https://amzn.to/3V6ZIdr</a>5M RGB with remote control <a target="_blank" href="https://amzn.to/44UPHDw" rel="nofollow noopener">https://amzn.to/44UPHDw</a>(I may earn a commission if you use the above Amazon Affiliate links. This will help me to upload the designs for private use for free)&nbsp;The new “case_back_003_RGB_fairy_lights” is compatible with both models RGB and warmwhite!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-02-02_87cee228f36e2.jpeg"></figure>&nbsp;New Inserts! Castle Neuschwanstein. Download them here: <a target="_blank" href="https://makerworld.com/en/models/167285" rel="nofollow noopener">https://makerworld.com/en/models/167285</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-02-02_736a10798e406.jpg"></figure>&nbsp;

Lovers Valentine Day Shadowbox

Lighted Projects

ImpacterDIY

Witcher fox mask, perfect for a masquerade ball :)

Witcher fox mask

Wearable

OVERTURE Filament

Designed for peak performance and maximum style, these V-shaped snow plows will clear the toughest of walkways. Each plow (R &amp; L) features a directional tab that&#39;ll snap into the front ventilation holes of your Crocs. We recommend swapping colors for a two-tone design, or printing in any vibrant color you like! We used Overture <a target="_blank" href="https://www.amazon.com/OVERTURE-Filament-Printer-Dimensional-Accuracy/dp/B089S2QDHD/ref=sr_1_5?qid=1704855800&amp;sr=8-5&amp;srs=20724929011" rel="nofollow noopener">matte yellow and matte black</a>&nbsp;Easy print, standard PLA with standard or tree supports👍🏻&nbsp;BONUS TIP: Fill your pockets with road salt and spread liberally to stop further ice.

Snow V-Plow for Crocs

For Friends

Just_Josh

I was lonely in my office one day and decided that I needed the merc with a mouth to keep me company. He does a great job listening to my conference calls and giving solid life advice.

Deadpool headphone holder

Office

Ocular Dynamic

Cool retractable karambit knife remix of a remix originally of cat claw box cutter. I'll have a profile that all one color and a 2nd profile with 2 plates, body separate from links so you can make them different colors if you wish.&nbsp;I only put supports for the hex nuts on the blade holder to make sure its clean. Push em out super easy with the hex key wrench through the hole from the other side.&nbsp;Assembly PartsFor Body:4x - M3x16mm screws4x - M3 Nuts&nbsp;For Blade:2x - M3x5 Screws2x - M3 Nuts&nbsp;Magnets [Optional]:3x - 6mm x 3mm

Retractable Karambit Knife

Tools

soukup273

A great idea for a international women&#39;s day gift!&nbsp;a beautiful Tulip with a stem that is suitable for decoration or as a gift. print the parts separately.<h2>!assembly requires glue, ideally instant glue or other plastic glue!</h2>It looks beautiful as a bouquet in combination with my other models!with Tulip:<a target="_blank" href="https://makerworld.com/de/models/94713#profileId-101302" rel="nofollow noopener">https://makerworld.com/de/models/94713#profileId-101302</a>&nbsp;with Rose:<a target="_blank" href="https://makerworld.com/de/models/89698#profileId-96027" rel="nofollow noopener">https://makerworld.com/de/models/89698#profileId-96027</a>&nbsp;with Deffodil:<a target="_blank" href="https://makerworld.com/de/models/94751#profileId-101334" rel="nofollow noopener">https://makerworld.com/de/models/94751#profileId-101334</a>&nbsp;

Beautiful Tulip With Stem - mother’s day Gift

Outdoors

kurticus

A magnetic K Cup holder that can be attached to any magnetic surface most likely the side of a fridge which is where mine is currently located. They can be stacked on top of each other and will attach with magnets. I have updated the design with version 2.0 that includes friction fit magnet holes, plus 2 additional posts for the magnets for improved attraction to the metal surface.&nbsp;Version 2.0For version 2.0, the magnet holes are specific for 10mm x 3mm magnets. The magnets fit into the holes tight so no glue should be needed. If you would like to glue the magnets I would recommend using E6000 glue to hold my magnets. These were the specific magnets that I purchased:<a target="_blank" href="https://www.amazon.com/dp/B09TPJ5FV2?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B09TPJ5FV2?ref=ppx_yo2ov_dt_b_product_details&th=1</a>&nbsp;Version 1.0The spacing between the magnet stands and the backing is 3mm. The round place holders are 18.5mm round. The specific magnets I used are 18mm x 3mm which can be purchased here:<a target="_blank" href="https://www.amazon.com/dp/B0BDFFCSKT?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.com/dp/B0BDFFCSKT?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>The magnets overhang a little bit on the stands, but hold the model just fine.This is meant to be printed with the front face down without supports. I printed this with a .6 mm nozzle with .3mm layer height in Matte PLA.

K Cup Modular Magnetic Holder

Kitchen

miniShev

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a target="_blank" href="https://www.patreon.com/minishev" rel="nofollow noopener">https://www.patreon.com/minishev</a>Patrons have access to all my files in one place, supported miniatures, a request board, as well as commercial options! Come check it out :-)

Cute Dragon 2

Figurines and Models

Zurlingo-3D

Just a cute articulated chick!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/256266/2023-12-11_06d5bcc1b8c31.gif"></figure>&nbsp;Features:&nbsp;<ul><li>Articulated wings and tail feather</li><li>Pop out legs and feet</li><li>Can be placed in a standing or sitting position</li><li>A great gift for family and friends</li></ul>Usage:&nbsp;Pick the chick up and tilt the legs to lock them in the standing position. There is a bit of a knack to this as you need to find a small ledge to rest the top of the leg against. (Please see cross section images)&nbsp;&nbsp;Note: There are 2 tiny pieces of support attached to the chick that will need removing post print.(if they don't fall off on their own)These are by the feet and should pop off with no effort at all.&nbsp;&nbsp;Please like, review and share this model! - I'm on a mission to get a Bambu Lab printer with maker points alone :D - Then I'd be able to actually print some multi-colour models myself!! haha.&nbsp;&nbsp;Thanks for looking!&nbsp;&nbsp;Commercial licence available here:<a target="_blank" href="https://cults3d.com/en/3d-model/game/cute-articulated-chick-commercial-licence" rel="nofollow noopener">https://cults3d.com/en/3d-model/game/cute-articulated-chick-commercial-licence</a> &nbsp;&nbsp;&nbsp;&nbsp;

Cute Articulated Chick 

Toys

xrockinmarkyx

highland cow planter

Ornaments

lindnjoe

Warning!! This takes patience to put together. Round Deer and Snowman Lantern with 3 thin layers that fit into a base. The layers have tabs on the bottom that fit into the slits on the base. The front layer with the snowman and deer is printed in two parts, you will need to put those two layers together to make one. The layers are printed very thin at 0.2mm. Be careful when taking them off the heat bed. Slide the tabs on the end into the slits on the opposite end.You can size up or down. For best results size up.I recommend a dab of glue on a couple tabs per section to hold the round layers to the base.3 Layers to print and 1 base. &nbsp;A tea light will sit in the middle. You need patience when putting this together.

Art