betaphish

Darth Vader

A Vallejo paint holder, which utilises the full width of the 76x56cm Ikea Skadis peg board. A total of 140 paints can be stored per board. Model is split into 4 easy to print pieces over 2 beds. Print 4 of the standard holders and 1 upper.&nbsp;I wanted to get as much paint as I could onto the pegboard. You will be able to fit 5 x rows per board, each row will hold 28 x paints. I have tested it with Vallejo, Green Stuff World and Army painter. This is around 3 to 4 more paints per row than traditional holders.&nbsp;Please ensure that the rear pegs are supported across their length. The included 3mf are pre-supported.&nbsp;I have uploaded a STEP file for a better overall print if you decide not to use the 3mf. Also any adjustments/remix can be made if need be.&nbsp;Each part is numbered at the back.&nbsp;I'd suggest a minimum of 3 walls to ensure the pegs are strong enough.&nbsp;*** V2 now added following a request.  This version allows you to see more of the bottle label and reduces the amount of filament, however it's strength will be effected.  I have not tested this, so use at your own risk ***&nbsp;&nbsp;PLEASE NOTE. Although very unlikely, some slight variation in slot diameter and distance between slots may be possible with some Skadis boards. Most are within tolerance, but if it doesn't fit, then please understand this is out of my control. I have printed 7 now and all slot perfectly into my board.

Vallejo, GSW, Army Painter Skadis full paint rack

skadis

Nigh87

Gengar figure

prints

buddel

To utilise this project you need a printer which is able to print with multiple materials (e.g. Bambu Lab Printer with AMS). I just saved the finished colored projects in Bambu Studio so you don't have to do this again if you have a compatible/similar setup.<ul><li>For the top tray I've combined all glue in labels, the rolling surface and the DnD lettering into one print.</li><li>The bottom tray is untouched.</li><li>The counters have two colors and the needed amount of left, right and middle wheels are already on one buildplate.</li><li>Get the scews, interchangeable labels for the bottom row and the bottom tray from the original creator</li></ul>

DnD Dice Box / Tracker Multicolor

Rick269

*** 18 Feb 24 - I've uploaded two extra profiles for the centre and side swivel mounts with different locating pins, as it appears that some printers (X1C?) have sealant put in the centre two holes, which means there is not enough depth for the original version's pins. Please let me know if they work, or not.&nbsp;*** 02 Feb 24 - I've added two more designs. One with a slight angle built in so the gauge faces more directly in line with the camera and the other one is adjustable with a snap fit connector built in and centre or side mounting swivel ***&nbsp;There are a few humidity/temperature gauge holders on Printables but I found they were difficult to see, being either obscured by the heat bed, or by the extruder when printing.I made this one which is easy to see from the front door and from the Handy App. As a bonus, it also doubles as a cover for the 4 holes at the back of the machine between the stepper motors.The model only needs a couple of supports for the pins and prints in ~15 min @ 0.20mm.I printed in ABS but should be ok in PLA+ or PETG.Uses a commonly available gauge from Amazon/Aliexpress. Search for “mini hygrometer temperature gauge”.Enjoy :)

Humidity/Temperature gauge holder for Bambu Lab X1C/P1P - New, improved versions!

GamerForge

I've put all the pieces together to print an authentic “The Madalorian Cosplay” with quick instructions. Please pay attention to the size of the parts! scale the parts to your size 12.09.2023 - added new model - The Mandalorian Cardridge holder / Bullet holder (look at “Accessories”) Mando Helmet sizes<ul><li>Large: 100% original size<ul><li>Inside dimensions 24x20cm - Head circumference up to max 59cm</li><li>Six-piece with sparing</li></ul></li><li>Medium: 91% original size<ul><li>Inner dimensions 22x18cm - Head circumference up to max 54cm</li><li>Three-piece without support structure in the middle</li></ul></li><li>Small: 84% original sizeinner dimensions 20x16cm - head circumference up to max 52cmOne-piece without support structure in the middle </li></ul><figure class="media"></figure>Armor Print all Parts (damaged or undamaged) and all Accessories. Jetpack Print all Parts. Arms decide which version of the arms you want and print all the parts. Legs Print the legs 2 times. Blaster Print all Blaster Parts Credits Helmet:<a href="https://www.printables.com/de/model/104677-how-to-print-the-mandalorian-helmet-size-s-m-l-and" rel="nofollow">https://www.printables.com/de/model/104677-how-to-print-the-mandalorian-helmet-size-s-m-l-and</a> Armor:<a href="https://www.thingiverse.com/thing:4074037" rel="nofollow">https://www.thingiverse.com/thing:4074037</a> Accessories: - Belt:<a href="https://www.thingiverse.com/thing:3940791" rel="nofollow">https://www.thingiverse.com/thing:3940791</a> - Mine Holder:<a href="https://www.thingiverse.com/thing:3950869" rel="nofollow">https://www.thingiverse.com/thing:3950869</a> - Mines:<a href="https://www.thingiverse.com/thing:3577447/files" rel="nofollow">https://www.thingiverse.com/thing:3577447/files</a> - Sling Rifle Clip:<a href="https://www.thingiverse.com/thing:3940845" rel="nofollow">https://www.thingiverse.com/thing:3940845</a> - Right Leg/Shin Armor:<a href="https://www.thingiverse.com/thing:4050910" rel="nofollow">https://www.thingiverse.com/thing:4050910</a> Jetpack:<a href="https://www.thingiverse.com/thing:4074037" rel="nofollow">https://www.thingiverse.com/thing:4074037</a> Arms:<a href="https://www.thingiverse.com/thing:4037828" rel="nofollow">https://www.thingiverse.com/thing:4037828</a> Arms modified:<a href="https://www.thingiverse.com/thing:4074037" rel="nofollow">https://www.thingiverse.com/thing:4074037</a> Legs:<a href="https://www.thingiverse.com/thing:2619639" rel="nofollow">https://www.thingiverse.com/thing:2619639</a> Blaster: <a href="https://www.printables.com/de/model/45919-mandalorian-pistol" rel="nofollow">https://www.printables.com/de/model/45919-mandalorian-pistol</a>

skadis

prints

dnd

x1c

Mando cosplay