besa3Dprints

Ciuf_Ciuf

After completing the print, it will be necessary to gently fold the wings and the horizontal tail as shown in the photoIt&#39;s very simple and quick to print, with a total time of 18 minutesGreat recreational item if you have kids&nbsp;Have fun!

Indoor/Outdoor Airplane

toys

SabreDesign

Recreate the spaceX starship launch with this desk stomp rocket. With a good push I have managed to get the rocket up to 3 meters, how high can you go? ;) All parts printed in Bambu Basic PLA, when using different filament the tolerances may vary. Made a profile to print the whole setup in one colour and a profile with for multicolour.&nbsp;If you want to support me you can join a patreon membership: https://www.patreon.com/SabreDesign Check out more of my designs below and on my profile:<img src="https://makerworld.bblmw.com/makerworld/draft/836529/2023-11-25_dca49cc0098b.png"><img src="https://makerworld.bblmw.com/makerworld/draft/836529/2023-11-25_35b5ef78c518a.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836529/2023-11-25_291e223d2e6dc.png">

Starship Stomp Rocket Launcher SpaceX

space/rocket

michael.steurer01

This is a little chain conveyor. I willl upgrade it in the near future so that the assembly will be easier. The pins can be a little bit tricky to mount.The chain needs to be connected with a little piece of filament.&nbsp;&nbsp;&nbsp;

conveyor 50mm

educational

3DVJModels

Introducing the Figure 8 Tree Support Marble Run!If you’re looking for a challenge you have found the right place! But brace yourself, this print takes quite some time as it will fill your build plate. **Pictured model is scaled down to 47% for use with 6mm marbles CompatibilityThis marble run was modeled using a 15mm steel ball with the track trenches at 16mm. With that said, this model is completely scalable below 100% so you are free to resize to accommodate any marble size below 15mm! (If you have a large build plate you can go bigger!)Print SettingsI have attached a screenshot of the settings I used for supports in Bambu Studio (based from PrusaSlicer). With that said, you may need to adjust settings depending on your preferred slicer.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/123904/2023-10-27_jmdxkh0pwicz.png"></figure>*Edit (5/20/23)<ul><li>Top interface spacing can be set to 0.0mm to help strengthen support connections as they won’t be removed!</li><li>Max bridge Length will vary the support structure under the model, I recommend a 10mm or smaller depending on scale!</li></ul>*Important note: If you are having trouble generating support under the whole bottom side of the track, you may have to paint them on manually. This is easily done in Bambu Studio, not sure for other slicers.<ul><li>Layer Height: 0.2mm (Your preference)</li><li>Infill: 10-15% is perfect</li><li>Walls: 2 perimeters minimum</li><li>Bottom layers: Bump this up to 4-5 Layers</li><li>Scale Range 47%-100%</li></ul>&nbsp;Feel free to share your masterpiece!&nbsp;

Scaleable Tree Support Marble Run - Figure 8 Style

marble

Zurlingo-3D

<h2> </h2><h2>VERSION 2.0 IS OUT NOW! - PLEASE DOWNLOAD THIS ONE TO AVOID ISSUES WITH TEETH:</h2><h2><a target="_blank" href="https://makerworld.com/en/models/115266#profileId-123953" rel="nofollow noopener">https://makerworld.com/en/models/115266#profileId-123953</a> </h2> Articulated Shark Fidget Toy (Old Version)&nbsp;<figure class="image image_resized" style="width:39.84%;"><img src="https://makerworld.bblmw.com/makerworld/draft/379945/2023-12-19_eae8e7acce0a1.gif"></figure>&nbsp;Features:<ul><li>Fully articulated body</li><li>Opening mouth with sharp teeth</li><li>Strong design</li><li>Pre painted print profile included</li></ul>&nbsp;<figure class="image image_resized" style="width:46.21%;"><img src="https://makerworld.bblmw.com/makerworld/draft/379945/2023-12-19_5fa61cea41b5b.gif"></figure>&nbsp;This shark prints super easily with no support required.&nbsp;A great piece to show off what a 3D printer can do!&nbsp;Extra Info:The mouth is designed to print shut with the top set of teeth acting as support for the upper jaw and head. You must make sure your printer is dialled in and calibrated properly as the teeth require very precise extrusion and have the potential to be melted shut.&nbsp;My tests so far have been great on an Ender 3 S1 Pro, so I'm sure you will have no issues using Bambu hardware ;)&nbsp;Post Print:In order for the mouth to open, you simply need to snip the very tips of the upper teeth with a pair of side cutters (or similar). The lower jaw should then drop with little to no resistance.&nbsp;You must cut the teeth manually. Please don't try and force the mouth open as you will most likely break of multiple teeth in the process.&nbsp;The mouth can stay closed if you want, so skip this step if that's your preference.&nbsp;Thanks for looking!&nbsp;-Please rate the print profiles and share pictures of your makes :) - I'd love to see them!&nbsp;This is the old version - Please print version 2.0 below:(Click the picture)<a target="_blank" href="https://makerworld.com/en/models/115266#profileId-123953" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/379945/2023-12-30_7c276ef3f9cfb.png"></a>&nbsp;Follow me to stay updated with my latest models!

toys

space/rocket

educational

marble

diverse