berger

Josh-3D

A headphone stand with industrial styling!&nbsp;I have my previously designed stand, but it's not always suited for larger headphones. I also wanted something a little more industrial styled, and thus managed to come up with this.&nbsp;Model is featured in Bambu PLA Matte Charcoal and Bambu Iridium Gold Metallic. A good alternative with similar look to Bambu's metallic is Hatchbox's Metallic line. There might be others, but that's the one I'm aware of.&nbsp;[Spotlight]Check out this <a target="_blank" href="https://makerworld.com/en/models/198355#profileId-218961" rel="nofollow noopener">PS5 Headset focused remix</a> by <a target="_blank" href="https://makerworld.com/en/@JJDeluxeDesigns" rel="nofollow noopener">Johan Jamaer - JJ Deluxe Designs</a>! &nbsp;[Tools & Assembly]&nbsp;Assembly is pretty easy. You'll need the following hardware and tools.M4x10 - 2M4x16 - 4 M4x20 - 4 M4x25 - 4 M4x40 - 4 M4 Nuts - 16Hex DriverDrill bit for clearing holes&nbsp;For the screws, I am using M4 Socket head cap screws. If you don't have M4 screws on hand, I would recommend purchasing an assortment kit, like <a target="_blank" href="https://www.amazon.com/gp/product/B09TYR314X" rel="nofollow noopener">this one from amazon</a>.&nbsp;Start by clearing out the holes as illustrated. A flat surface was left on these holes so additional support wouldn't be needed during printing. Only the leg and foot pads will need this.<figure class="image image_resized" style="width:51.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_cc69e7772ce41.png"></figure>For assembly, you'll be using the 3d printed spacers along with the M4 screws. The side with the nut is wedged slightly, so as you tighten it, it should grip onto the model instead of spinning.<figure class="image image_resized" style="width:50.28%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_e4a86bd163cf6.png"></figure>For the headphone rest, first screw the top to the bracket.<figure class="image image_resized" style="width:49.1%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_4922cbd159136.png"></figure>Then use the following image to help guide the rest of the build, and which screws go where. First assemble the main arm, and then work your way outwards, attaching the base, legs, feet, and headphone rest.<figure class="image image_resized" style="width:71.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_6c33876ddced.png"></figure>&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you're looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Headphone Stand - Industrial

Haushold

CATIAV5FTW

1/2/2024 UPDATE: I have incorporated several minor design improvements to the parts to improve clearances, ease of printing, and ease of assembly. Parts require fewer supports as well. These updates are included in the Jet Engine Model for Kit-006 print profile. This is the latest and greatest profile, so I highly recommend using this from now on. The parts from the previous release, now renamed (OLD) Jet Engine Model for Kit-006, are still compatible with these new parts, however, so you don’t have to reprint the whole thing if you don’t want to.&nbsp;Overview:A cutaway model of a 2-spool high bypass turbofan. I designed the whole engine from scratch with cues to certain existing engines. For example, I think Rolls-Royce makes the best-looking fans, so there&#39;s some resemblance there... Since originally uploading to Thingiverse in 2016, the popularity of this model has grown far beyond expectations. The model has appeared in numerous publications, additive manufacturing expos/conferences, and is (for better or worse) being made and sold by a number of 3rd parties. However, rest assured that this is one of the official sources for this model. A bunch of remixes of this engine are out there, mostly in Thingiverse at the moment, if you are so inclined. I&#39;ve also designed an <a target="_blank" href="https://makerworld.com/models/158422" rel="nofollow noopener">alternate fan for this engine</a> that more closely resembles GE and P&amp;W engines. Check it out!&nbsp;I uploaded a diagram with labels to all parts for reference. For more detailed instructions, the YouTube assembly guide at the bottom of this description walks you through the process.&nbsp;Please refer to the BOM (Bill of Materials, aka Parts List) below for keeping track of what parts to print.&nbsp;===The required fasteners (screws, washers, and nuts) and ball bearings are listed below. However, to make your life easier, there is an official hardware kit that includes these components: <a target="_blank" href="http://shrsl.com/4cfq0" rel="nofollow noopener">Jet Engine Model Components Kit - 006</a>. <ul><li>Metric machine screw, allen socket cap, 2.5mm x 0.45mm x 10mm (QTY 100)</li><li>Metric flat washer, 2.5mm (QTY 200)</li><li>Metric hex nut, 2.5mm x 0.45mm (QTY 100)</li><li>6204 open ball bearing 20x47x14 (QTY 2)</li><li>6003 open ball bearing 17x35x10 (QTY 2)</li></ul>The jet engine will look great in any filament, but what I recommended (and what is pictured) are the following:<ul><li><a target="_blank" href="http://shrsl.com/4cfqh" rel="nofollow noopener">PLA Basic Jade White</a></li><li><a target="_blank" href="http://shrsl.com/4cfqm" rel="nofollow noopener">PLA Basic Blue-Gray</a></li><li><a target="_blank" href="http://shrsl.com/4cfqs" rel="nofollow noopener">PLA Basic Black</a></li><li><a target="_blank" href="http://shrsl.com/4cfr0" rel="nofollow noopener">PLA Metal Cobalt Blue Metallic</a> --OR-- <a target="_blank" href="http://shrsl.com/4cfrd" rel="nofollow noopener">PLA Metal Iron Gray Metallic</a></li></ul><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=dNsBbN54J-I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/dNsBbN54J-I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Jet Engine Model Components Kit - 006 and filament through the links above, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to the public.) ===&nbsp;Good luck and happy printing! Message me with any questions!

3D Printable Jet Engine

Models

sipura

Hello everyone,&nbsp;UPDATE 10/03/2024New upper inner tray profile added. Easy to print. To assemble you need 4pcs magnets 8x1,5mm and 2pcs filaments for hinges. &nbsp;There were a lot of questions and a lot of you asked for a bigger case, so we decided to make it.This is the 3rd case we made and the largest, the XL model  The difference from the previous models is that we changed the design of the clips, and the hinges are 0.5mm thicker than the first standard, we think that&#39;s a sweet spot.&nbsp;Also, the inner boxes are larger and are modular. You can remove the partitions, and increase or decrease the inner box according to your needs.&nbsp;Big advantage is that the inner boxes are compatible with those of the smaller models, which you can see in the last two pictures.&nbsp;Simple print without supportAll parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x32mm3pcs of screws M3x20mm&nbsp;I hope you like it, and enjoy printing and using this useful case.Feel free to put your pictures of printed models in comments. :D&nbsp;Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.&nbsp;Enjoy printing :D

Utility XL - case

Tools

Davewilhelm

I wanted more of the exact Bambu reusable spools with the holes from the factory so I 3D scanned one. The file i have uplaoded has bigger holes than the one you see in the picture to actually match the Bambu spool. I am going to print more with clear PETG to match the translucent ones from Bambu.

Haushold

Models

Tools

Accessories & Build