beastslayer

Thicc

A simple 2D wall art of our Beloved Fiesta ST MK7, perfect for the garage or office. Scaled to print at 300mm, you may need to scale down to fit smaller printers. support not needed. printed in ABS as shown.

Ford Fiesta ST MK7 wall hanger silhouette 

PhaseworksCA

<h3>Capture a moment of affection with this low poly 3D print, depicting a couple walking and holding hands. </h3><h3>This minimalist design renders the scene in sharp, geometric lines, creating a modern and stylish portrayal of companionship and love, ideal for those who appreciate contemporary art and heartfelt representations.</h3>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/764933/2024-03-25_9951300e07d46.png"></figure>&nbsp;<figure class="image image_resized" style="width:99.3%;"><a href="https://www.printables.com/@PhaseworksCA/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/764933/2024-02-27_cbac20a9d0926.png"></a></figure>

Geometric Low Poly Valentines Couple

gifts

Theodor

Fox cookie cutter.&nbsp;You can check my profile for more cookie cutters 🙂.

Fox cookie cutter

cooking 

Jamburgg

PEDRO PEDRO PEDRO!! Meet Pedro the Crochet Raccoon as seen in all the memes!&nbsp;He stands around 80mm tall so he&#39;s the perfect pocked sized raccoon!&nbsp;If you like my models consider supporting me with a coffee! <a target="_blank" href="https://buymeacoffee.com/jamburgg" rel="nofollow noopener">https://buymeacoffee.com/jamburgg</a>&nbsp;Print Guide:Prints in one piece and can be painted either by hand or in the slicer if you have an AMS. I have included a single colour print profile as well as a painted -multi-colour print profile.&nbsp;Walls/Perimeters: Any. Purely decorative so doesn&#39;t need any strength.Infill: Any. Same as above.Supports: None. The slicer will show several areas as overhangs, however the texture covers up the small imperfections and adds to the crochet look!Layer Height: ≤ 0.2mm. Model was printed at 0.2mm layer height. A smaller layer height would give more detailMaterial: Any. PLA used here but any can be used

Pedro the Crochet Raccoon

animals

Williams Industries

We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>Patreon includes commercial use on all prints.

Cat Coaster

festive 

Markury

I saw a tiktok with a keyboard that was all ducks and I had to have one. This one is only suitable as an escape key or similar since they don't like to sit next to each other. Edit: An experimental “v2” version is provided that has enough clearance for multiple ducks to sit next to each other. Still, this version does not address that keys interfere with each other in adjacent rows. I did make an updated version, and it's available for purchase on the orange website that starts with a “P” on my profile, Markury.&nbsp;Please share your makes. Happy printing!&nbsp;Note: My print preset has supports under the beak with support blockers inside the keycap. You might be able to get away with no supports if you slow it down enough.

Ducky Artisan Keycap (AMS)

gadgets

reefsurfer

This a model I designed as a gift and also as a way to test out the AMS.&nbsp;Video on how I designed the coaster<figure class="media"><div data-oembed-url="https://youtu.be/CiKTtSWDXGI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/CiKTtSWDXGI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

coasters

figures

西界3D

With the support of Super Mario's invincible stars, your printing will not go wrong.

A1/A1 mini - Invincible Star extruder

games

reddadsteve

Sylvester James Pussycat, Sr. is a fictional character, an anthropomorphic tuxedo cat in the Looney Tunes and Merrie Melodies series of cartoons.Sylvester appeared in 103 cartoons and most of his appearances have him often chasing Tweety, Speedy Gonzales, or Hippety Hopper. Three of his cartoons won Academy Awards, the most for any starring Looney Tunes character. Sylvester's trademark exclamation is "Sufferin' succotash!"No supports are required. One piece contains built-in supports, an optional part without the built-in supports is also supplied if you want to use your slicer supports. If you have the proper filament colors, no painting is needed.The assembled model is 200mm tall.Enjoy! ...........................................................................................................**Print Instructions:** Supports: No Resolution: .2mm Infill: 10%Notes:**Refer to the notes below for a few helpful printing and assembly instructions............................................................................................................**Building the model**ColorsBlack: (Paramount3D PLA - Black) body_black body_black_without_supports (optional piece without built-in supports) eye_blacks (contains two identical pieces) whiskers_right (contains two identical pieces) whiskers_left (contains two identical pieces) foot_pad_left foot_pad_right ..Red: (Hachbox PLA - True Red) mouth nose ..White: (Overture PLA - White) eye_white_left eye_white_right tail_white body_white hand_left hand_right foot_left foot_right ear_left ear_right hair_back_left hair_back_right ..Pearl: (Protoparadigm PLA, out of business - White Pearl) claws_hands (contains eight identical pieces) claws_feet (contains six identical pieces) ..Pink: (Paramount3D PLA - Harajuku Pink) tongue...........................................................................................................**Printing and assembly tips**Printing tips 1 - No supports are required. 2 - There are some pieces that may need brims or rafts, use your discretion. When setting up my prints I prefer to be conservative, especially since the base of many parts are hidden when inserted into another part. For the smaller parts, a good first layer is helpful.*I used brims on: claws_hands claws_feet hand_left hand_right3 - I used a pearl white color for the claws to hightlight them. A clear transparent with a higher infill may work well, or a silky white.4 - The body_black piece is taller than any of my other models. It fits on my Prusa MK3 but not on the Prusa mini. Be sure to check this part first to ensure your printer can handle the height. The model can be resized down, but be careful to check that the small parts can still be printed... Assembly tips:1 - Take your time gluing the model together and enjoy the process.2 - I used E6000 sticky craft glue to put this model together. The sticky glue allows more time to position the parts than a fast drying superglue. I have 'fat fingers' and a shaky hand, so the sticky glue works out best for me, especially with small pieces. Just remember to leave enough time for the glue to set before combining too many parts.3 - Be sure to insert the body_white (with completed mouth/tongue) into the body_black before attaching the hands.4 - All the claws have round bases. Be sure to rotate the nail in the correct direction when inserting and gluing them in.5 - The whiskers fit perfectly, but need to be positioned correctly to insert them. The flat side from the printer bed faces back. The holes are notched and the whiskers only fit one way. Personally, I had to keep poking around to fit them in but once positioned correctly they slid right in.6 - Refer to the assembly diagrams in the pictures section as well as the uploaded pictures for putting the model together. The model is meant to be glued.Do not hesitate to ask questions, feedback is essential to making better models.&nbsp;

Sylvester the Cat

cartoons

Creatività in 3D

<h2>Horse inspired by Ferrari</h2><figure class="image image_resized" style="width: 31.11%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000448771/design/2024-05-17_9934cdee42fd.png"></figure>Prancing horse inspired by Ferrari.&nbsp;Why did Ferrari use a prancing horse?&nbsp;Ferrari adopted the prancing horse as its main symbol because it was the personal emblem of an Italian national hero from World War I, fighter pilot Francesco Baracca. After Baracca&#39;s death in 1918, the pilot&#39;s father donated the symbol to Scuderia Ferrari, founded by Enzo Ferrari in 1929. Ferrari, being a racing enthusiast and recognizing the symbolic value of the prancing horse, adopted it as the emblem for his racing cars. This symbol then became an icon of the Ferrari brand, representing power, elegance, and Italian excellence in the world of racing and automobiles.&nbsp;<figure class="image image_resized" style="width: 29.48%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000448771/design/2024-04-30_e028d24743cb3.jpg"></figure>&nbsp; Table figurine, desk, inspired by Ferrari. I wanted to recreate the logo in 3D with my own reinterpretation of the horse and the writing.I created 2 profiles for those with AMS and for those without AMS. The profile for those without AMS features a pause in the slicer at level 79 to allow for color changes.Enjoy

Horse inspired by Ferrari

room stuff

mail.iou

Collapsing Katana 袖白雪 (BLEACH -Kuchiki Rukia)This is a telescopic sword inspired by the sword "袖白雪" used by Kuchiki Rukia in the Japanese manga "BLEACH".Updat 2/28/2024 Because the end of the blade is too sharp, some filaments may have different flow characteristics. If after printing, you feel that the end blade is stuck too tightly and cannot be easily retracted, you can apply silicone oil or try to remove the fourth end blade. Reduce the ratio to 0.98, and then print the last blade part. You can also download print profile: "end blade 0.98" directly to print the end blade part. This is a telescopic katana that is printed in parts and then assembled. You can choose to print different colors and strengths for different parts.  The handle is capped to facilitate future maintenance and blade replacement.However, the disadvantage of this is that the printing time will increase.  If you are sure that you can print an all-in-one print, you can refer to my previous telescopic knife work Reverse Blade Sword mini: https://makerworld.com/en/models/114630&nbsp;Notice It is recommended to use PLA+、PETG for printing. If your filament has insufficient strength, please increase the fill overlap to more than 40%.&nbsp;Assembly instructions: 1. Place the blades in order.2. Close the handle cover.<img src="https://makerworld.bblmw.com/makerworld/draft/601737/2024-02-24_6f218b5f4cbbc.png"> 3. Insert two pins to secure.<figure class="table"><table><tbody><tr><td><img src="https://makerworld.bblmw.com/makerworld/draft/601737/2024-02-24_7bd6711ce67e3.png"></td><td><img src="https://makerworld.bblmw.com/makerworld/draft/601737/2024-02-24_ece1f43620c45.png"></td></tr></tbody></table></figure>Remark: 1. If the pin is too loose, you can apply removable glue, such as Styrofoam, to the tip of the latch to facilitate removal during future repairs. 2. Since the flow rate of each brand of filament will vary, the pin may be too thick or too thin. If you encounter this problem, you can adjust the Z height of the pin and print the two pin parts separately. 3. If it is difficult to align the exit hole when the pin is inserted into the tool holder, you can use a blade to push in the direction of the hole to facilitate alignment of the exit hole.<figure class="table"><table><tbody><tr><td><img src="https://makerworld.bblmw.com/makerworld/draft/601737/2024-02-24_383d366365265.png"></td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/601737/2024-02-24_08d21962ae4eb.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/601737/2024-02-24_4f45d2e261b7f.png"></figure></td></tr></tbody></table></figure>

Collapsing Katana 袖白雪 (BLEACH -Kuchiki Rukia)

weapons 

Bearded Printer

Update May 07, 2024: Updated profile to exclude supports on the main model, leaving the wings as the only objects that have supports.&nbsp;Featuring my latest design, a baby dragon, you can add this cute little guy to your arsenal of dragons!&nbsp;Discover the joy of 3D printing with our Baby Dragon 3D model! Crafted meticulously by Bearded Printer, this model is an ideal embodiment of precise, articulated design.&nbsp;This adorable Baby Dragon model accommodates both single and multi-material printers providing a versatile option for all.For single-material printers, the model can be printed in individual components and assembled post-printing - a fantastic opportunity for color creativity.

car