bcarlson320

FilliFuu

Flexi steampunk dragon featuring my new experimental articulated joints as seen on my latest model releases.&nbsp;A highly detailed model where the joints can be clicked into position, with added articulated arms and wings. The ball sockets on the links throughout the dragons body can be clicked to maintain stable positions if desired, useful for posing of the model and to give the standard articulated design commonly seem an added twist.&nbsp;Due to the force required to click the joints it recommended to avoid using brittle filaments such as silk if you intend to use the joining function. I have included an stl file containing just the joints to quick print the links if you are unsure if your filament is strong enough for the design.&nbsp;Model is completely print in place supports aren't required on the body or wings however it's more suitable to uses supports on the wings only, I have successfully printed without supports for the wings with just an increased size brim but it's safer to print with to avoid any failures towards the end of the print.&nbsp;Wall size is fine at the standard 0.42, i ran the walls at 90 with gyroid infill with 100% success, tested with many filaments and sizes. (silk is too weak when assembling the joints typically) and brim on.#&nbsp;Can be scaled in size up or down. If scaling down the smallest recommended size would be 75 percent maximum to ensure the joints still work. If scaling up the limit should be your machines full bed capacity, and of course a larger print will mean a stronger model.&nbsp;Any questions just ask and share if you enjoy the print.

Steampunk Flexi Dragon

stuff

kjbturok

I made a remix of the cool design of my colleague <a href="https://www.printables.com/es/@RockChewer" rel="nofollow">RockChewer </a>What's new in this design?:- A hole has been added where to mount the leds with their respective holes facing the outside.- The front has been reduced by 1mm since in my case the front part did not fit in the hole of my X1.- The position of the connector holes has been changed. Now it is mounted from the bottom. Also the size of the connector has been increased to make the mounting more rigid.- The top holes for the led mounting have been removed as I think the new led location is better.- Attached are the files in .step format and a project file that already has the brackets in the critical places.- Accessories are added as an external coil support and a piece to add a switch and a DC connector for the leds. In my case it has been printed in PLA Layer height 0.6 4 perimeters 3 layers top and bottom 15% gyroid. (Optional) The following is required for mounting the switch and DC socket: - 1x 15x21mm push button<a href="https://s.click.aliexpress.com/e/_DkjPZif" rel="nofollow">https://s.click.aliexpress.com/e/_DkjPZif</a><ul><li>1x 10,7mm outer diameter female dc connector</li></ul>Select "type D" <a href="https://s.click.aliexpress.com/e/_DkVP1Zz" rel="nofollow">https://s.click.aliexpress.com/e/_DkVP1Zz</a> - Quick glue to fix the dc connector If you like my designs give me like and share. If you like them a lot invite me to a coffee. <a href="https://www.buymeacoffee.com/kjbturok" rel="nofollow">https://www.buymeacoffee.com/kjbturok</a><a href="https://www.paypal.com/paypalme/ChinadlaConchinchina" rel="nofollow">https://www.paypal.com/paypalme/ChinadlaConchinchina</a> ES Hice un remix del genial diseño del compañero <a href="https://www.printables.com/es/@RockChewer" rel="nofollow">RockChewer</a>&nbsp;Que hay de nuevo en este diseño?:- Se a agregado un hueco donde montar los leds con sus respectivos agujeros que dan al exterior.- Se a reducido 1mm el frontal ya que en mi caso la parte frontal no encajaba en el hueco de mi X1.- Se a cambiado la posición de los agujeros del conector. Ahora este se monta desde abajo. También se aumentado el tamaño del conector para que el montaje sea mas rígido.- Se an eliminado los agujeros superiores para el montaje de los led ya que pienso que la nueva ubicación de los leds es mejor.- Se adjunta los archivos en formato .step y el un archivo de proyecto que ya cuenta con los soportes en los lugares críticos.- Se añaden accesorios como un soporte de bobina externo y un pieza para agregar un interruptor y un conector DC para los leds En mi caso se a impreso en PLA Altura de capa 0.6 4 perímetros 3 capa superior e inferior 15% giroide. ( Opcional ) Para el montaje del interruptor y conector dc hace falta lo siguiente:&nbsp;<ul><li>1x Pulsador 15x21mm</li></ul><a href="https://s.click.aliexpress.com/e/_DkjPZif" rel="nofollow">https://s.click.aliexpress.com/e/_DkjPZif</a><ul><li>1x Conector dc hembra de 10,7mm de diametro exterior</li></ul>Seleccionar "tipo D" <a href="https://s.click.aliexpress.com/e/_DkVP1Zz" rel="nofollow">https://s.click.aliexpress.com/e/_DkVP1Zz</a><ul><li>Pegamento rápido para fijar el conector dc.</li></ul>&nbsp;&nbsp;Si te gusta mis diseños dale me gusta y comparte. Si te gustan mucho invítame a un café. <a href="https://www.buymeacoffee.com/kjbturok" rel="nofollow">https://www.buymeacoffee.com/kjbturok</a><a href="https://www.paypal.com/paypalme/ChinadlaConchinchina" rel="nofollow">https://www.paypal.com/paypalme/ChinadlaConchinchina</a>

stuff

AMS