Bay101

rowiac

My 40V Ryobi leaf blower came with a small charger that had no way to mount it on the wall. There appear to be several types of 40V Ryobi chargers out there, so this one is for the OP404VNM model that I have. Other versions are either for a different model, or require you to disassemble the charger to use the mount.&nbsp;This design is two-pieces that clamp together with four M3 x 10 screws and two wood screws to mount to the wall. No modification is needed to the charger. It can be removed from the bracket at any time by removing the four screws. Note that to keep the bracket small, I chose to put the wall mount screws behind the charger, so you need to mount the back plate to the wall before installing the charger in the bracket. There is also a groove in the back plate to route the charging cable.

Ryobi 40 Volt Charger Wall Mount

Storage - Garage

duck.knapp

update:Variant 3 should now fit all AMS&nbsp;&nbsp;I designed a holder to hold your replacement buildplate <a target="_blank" href="https://makerworld.com/de/models/107641#profileId-114955" rel="nofollow noopener">https://makerworld.com/de/models/107641</a> &nbsp;Remix of “all” the other AMS risers.&nbsp;I completely rebuilt the model. I have adjusted a few things.<ul><li>Dimensions minimally adjusted</li><li>Break-out cable entry at the front and back</li><li>20mm x 20mm hole pattern on the sides to enable attachments to be screwed on</li><li>12mm LED are possible</li><li>the LEDs can be attached with cable ties (holes in the model)</li><li>a lip in front of the LEDs so that you are not blinded</li><li>connection of the individual parts using a connector in the shape of a bone. This makes it easier to adjust the fit of the parts later</li></ul>&nbsp;&nbsp;More of my models:One of my latest models is a <a target="_blank" href="https://makerworld.com/de/models/127126#profileId-137532" rel="nofollow noopener">Chain Guard</a>. This prevents the chain from getting caught on the screw, etc. on the side.<figure class="image image_resized" style="width:65%;"><a href="https://makerworld.com/de/models/127126#profileId-137532" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/383149/2024-01-09_1b562f11d77e8.png"></a></figure>&nbsp;&nbsp;If you need a AMS wall mount with a filament holder, you are welcome to take a look at <a target="_blank" href="https://makerworld.com/de/models/108285#profileId-115655" rel="nofollow noopener">AMS Wall Mount + Filament Holder Wallmount</a><figure class="image image_resized" style="width:58.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/383149/2023-12-26_896474884014.png"></figure>

Storage - Garage

Printer Upgrades