HomeCreator

Darren

AUTOTRAY LITE&nbsp;<figure class="table" style="width: 95.57%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_5b16cb3dce6a.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_63e85c7e5eb8b.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_8b4c3443c53cb.jpg"></figure></td></tr></tbody></table></figure><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model and want to encourage me to come up with more original and innovative designs please consider boosting this model.  I mainly design more unique and complex models that take longer to print.  Due to print time they get downoloaded less frequently than quick to print models.  Boost are a way to compensatie for this and are always greatly appreciated.   Thank you</boostcontent></boostme>&nbsp;Design&nbsp;This is a more compact version of Autotray that can be printed on any printer with a 180 mm x 180 mm plate including the A1 mini, P1 and X1. The full sized Autotray is here: <a target="_blank" href="https://makerworld.com/en/models/425827?from=search#profileId-329526" rel="nofollow noopener">https://makerworld.com/en/models/425827?from=search#profileId-329526</a><ul><li>It is quick to print. 8.5 hours for P1 and X1 and 11.5 for A1 mini</li><li>It has much fewer parts than the full sized Autotray</li><li>Is is quick and simple to assemble and disassemble with clips (see the Clip cards).</li><li>The angular position of the tray can easily be adjusted.</li><li>It folds easily for storage.</li><li>I have included print profiles for the X1 and the A1. The print files are in 3 parts. The main unit, the rear headrest brackets and the optional components.</li><li>Support is only required for the rear headrest brackets</li><li>The hinges for the steering wheel brackets and the rear headrest brackets are print in place.</li><li>The rear head rest bracket features a rotating cylinder to lock the bracket in place.</li><li>No external parts are required</li></ul>Options and features<h2 style="text-align: center">*** NEW OPTIONS FOR AUTOTRAY LITE ***</h2>Here are some new options for Autotray Lite.  Be sure to check back as I will be adding to these in the next while.&nbsp;<figure class="table" style="width: 93.76%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-11_54c652af38c7.png"></figure></td><td>Car basketball add-on A great way to relieve boredom when waiting in the car.  I enjoyed making and playing this game. You can get this add-on <a target="_blank" href="https://makerworld.com/en/models/461087#profileId-369765" rel="nofollow noopener">here</a>     </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-11_5b00ce96e39de.png"></figure></td></tr></tbody></table></figure><figure class="table" style="width: 93.76%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/459198" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-09_5f73650b40ee5.png"></a></figure></td><td>Autotray Laptop/tablet add-onThis is one of the new optional add-ons for Autotray to allow use of a laptop/tablet.  The trays replace the tablet holder and can be quickly and easily be added and removed.  Enjoy!  &nbsp;You can get this add-on by clicking <a target="_blank" href="https://makerworld.com/en/models/459198" rel="nofollow noopener">here</a>&nbsp;&nbsp;</td><td><figure class="image"><a href="https://makerworld.com/en/models/459198" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-09_e2f1cc338a717.png"></a></figure></td></tr></tbody></table></figure><figure class="table" style="width: 93.76%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width: 97.33%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-10_e32eaf1e349e2.png"></figure></td><td>Chopstick holder add-on This add-on is for a chopstick holder.  I added print profiles for the A1 and the P1 and X1 as well as a STL file.</td><td><figure class="image image_resized" style="width: 93.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-10_456ee0b5f4d96.png"></figure></td></tr></tbody></table></figure>Autotray includes many options and features which can quicly and easily be attached to Autotray with clips:<ul><li>Phone mount brackets (back and bottom)</li><li>Nintento Switch mounting brackets</li><li>Fry holder</li><li>Ustensil holders</li><li>Tablet holder</li><li>Mouse pad</li></ul><figure class="table" style="width: 96.61%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_791d636e9d508.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_aa448f0f2541b.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_df39a6ff45d86.png"></figure></td></tr></tbody></table></figure>Autotray has mounts to enable adding other parts and features.  Assembly is quite simple. It is shown in the gif.&nbsp;Autotray full size&nbsp;Autotray is also available in a larger 3d model suitable for in car offices etc.  The link for the 3d model is : <a target="_blank" href="https://makerworld.com/en/models/425827#profileId-329526" rel="nofollow noopener">https://makerworld.com/en/models/425827#profileId-329526</a>&nbsp;I welcome any comments and suggestions about improving Autotray.&nbsp;My designs &nbsp;I enjoy creating 3d models that others can use and appreciate.  It is a very fun pastime.   I find it very rewarding to see my models downloaded and printed.  I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. &nbsp;If you liked my model and wish to encourage me please give it a like or a boost. If you wish you can also help me with my <a target="_blank" href="https://ko-fi.com/darren3dmodels" rel="nofollow noopener">filament costs</a>.  Thank you.&nbsp;My Models&nbsp;If you are interested, here are some of my creations. You can also see all my models on my <a target="_blank" href="https://makerworld.com/en/@user_1543154938" rel="nofollow noopener">profile</a>.&nbsp;<figure class="table"><table style="border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/425827?from=search#profileId-337902" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_8cb4bfc480828.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/425827#profileId-337902" rel="nofollow noopener">Autotray</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/439932#profileId-345597" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_80f1fc53f1258.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/439932#profileId-345597" rel="nofollow noopener">Versa Mount</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/447157#profileId-353793" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_252dfd34be1da.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/447157#profileId-353793" rel="nofollow noopener">Table saw</a><a target="_blank" href="https://makerworld.com/en/models/447157#profileId-353793" rel="nofollow noopener">Outfeed </a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/440873#profileId-346595" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_c0c403ecc4bc.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/440873#profileId-346595" rel="nofollow noopener">Treat helper</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/457210#profileId-365192" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_7677874c7a172.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/457210#profileId-365192" rel="nofollow noopener">Ipad tablet stand</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/432891#profileId-337490" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_f02e210418cb4.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/432891#profileId-337490" rel="nofollow noopener">Autotray Lite</a></td></tr></tbody></table></figure>&nbsp;&nbsp;

Autotray Lite - A1, P1 and X1 compatible

auto

Dragoon

Printed in Amazon PLA Basic Goldat 0.08mm layer height&nbsp;Turn Aux Fan off and Print slowly&nbsp;I adjusted the size of the fins, since the original ones seemed to big compared to the gun. I then mirrored the half of the gun and assembled the pieces, so that you have a complete gun, which you can print in one go.  The first print profile is oversized, it is the size the original maker made with my changes already applied and was my first attempt on this gun.&nbsp;The second print profile, has adjusted sizes. The Zat is more screen accurate like this, i leave my first (Oversized) profile here, so that you can choose, which you like more.&nbsp;Have fun printing^^

Stargate Zat Nik Tel

film

CustomCreations

Dewalt coaster !109.5mm diameter.only 3 filament changes.Stand for my coasters here:<a target="_blank" href="https://makerworld.com/en/models/170541#profileId-187215" rel="nofollow noopener">4 pcs</a><a target="_blank" href="https://makerworld.com/en/models/241129#profileId-257192" rel="nofollow noopener">5 pcs</a><a target="_blank" href="https://makerworld.com/en/models/170544#profileId-187219" rel="nofollow noopener">6 pcs</a><a target="_blank" href="https://makerworld.com/en/models/241132#profileId-257196" rel="nofollow noopener">7 pcs</a><a target="_blank" href="https://makerworld.com/en/models/170546#profileId-187222" rel="nofollow noopener">8 pcs</a><a target="_blank" href="https://makerworld.com/en/models/241140#profileId-257204" rel="nofollow noopener">9 pcs</a><a target="_blank" href="https://makerworld.com/en/models/241150#profileId-257213" rel="nofollow noopener">10 pcs</a>&nbsp;If you want a design in a similar motif feel free to message me :)

Dewalt coaster

outil

Sevro

Update:28.03.2024 - I redesigned the lamp a bit. I made it a little thicker, so now it is compatible with 12 mm LED strip and is also stronger.&nbsp;I used to this version LED STRIP from Bambu Lab Store<a target="_blank" href="https://store.bambulab.com/collections/led-strip-light/products/white-cct-tunable-cob-led-strip-light?skr=yes" rel="nofollow noopener">https://store.bambulab.com/collections/led-strip-light/products/white-cct-tunable-cob-led-strip-light?skr=yes</a>&nbsp;&nbsp;The diffuser has a larger flange and fits better into the main ring.I enlarged each piece by 110% so it now better takes advantage of bed size of the Bambu Lab printers <figure class="image image_resized" style="width: 68.55%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-03-28_e7c1da1fbecee.jpg"></figure>I created new print profile with this new design and will be develop this project with this size of lamp.If you want use front panels of other designers make sure that is proper size. If it too small just easy enlarge it to 110 % in X and Y axis <figure class="image image_resized" style="width: 44.26%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-03-28_867e2b9fbfc93.png"></figure>&nbsp;02.02.2024 - New front panel added : Deer in the forest05.02.2024 - New front : Birds in love&nbsp;&nbsp;Overview.A Ring Lamp that can be changed to different situations. I designed base with various panels which can adapt to various style and occasion. You can simply change color of it as well as pattern on it, by changing color of diffuser and changing different panels.WARNINGSLed strips can emits some heat depends on what type of led you and voltage you use. In my case temperature of Main Ring achieve 60 °C . Due to this I recommend use filament that can resist that temperature especially for Main Ring. I tested ASA and it works well. Other high temperature filaments should work too (ABS, PETG but I didn&#39;t test it) PLA in this case can bend over time especially if you use heavy panel like budha.So in summary I tested and recommend :Main Ring - ASABase, Diffuser - PLAPanels- PLA or ASAIf you want change panel, always wait to cool down the ring lamp, otherwise PLA cover can bend during take off.Electric parts you need.<ul><li> led stripe - I used: LED COB 8W/1M 12 V, 8mm wide - choose one that can be cut every 2.5 cm</li></ul><figure class="image image_resized" style="width: 430.185px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/6db55f53-37bb-4cbb-ba60-486465aa3c52.webp"></figure><ul><li>dc connector - I used 2.1/5,5 mm , the diameter of the mounting hole is 11.5 mm</li></ul><figure class="image image_resized" style="width: 424.403px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/8867176f-a9e4-4554-8087-7b1fd3a6b430.webp"></figure><ul><li>OFF-ON SWITCH</li></ul><figure class="image image_resized" style="width: 424.332px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/5cf1687e-913a-4186-92f2-75d8d2bac909.png"></figure><figure class="image image_resized" style="width: 425.98px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/4ed0768e-9f72-45b5-9dc0-72aa2a703338.png"></figure><ul><li>Charger 12V</li></ul><figure class="image image_resized image-style-align-center" style="width: 434.759px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/1b0daae1-d790-41b4-a6da-4028c899a774.webp"></figure>Printed PartsMain Ring, Base and Panels can be printed in draft mode 0.28-0.30 mm layer height with no issue.Diffuser should be printed with 0.2 mm layer height.<ol><li>After print, glue led strip to inner side of Main Ring</li></ol><figure class="image image_resized" style="width: 539.361px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/55f0a8a9-5b68-4a7a-b60e-def1c0cf337a.webp"></figure>Start from hole on bottom side<figure class="image image_resized image-style-align-center" style="width: 537.429px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/8f453fdd-01d6-476e-baaa-f03826eac490.webp"></figure>2. Put Main Ring into base. It should fit tight without glue.<figure class="image image_resized image-style-align-center" style="width: 538.864px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/f03a229b-e68e-4835-9d5f-37f66a2677d0.webp"></figure>3. Insert the electric part into the base and connect them by soldering<figure class="image image_resized" style="width: 535.014px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2e73757c-be70-46f0-8fbb-ebc700b2e62a.webp"></figure><figure class="image image_resized" style="width: 531.08px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/75ca1515-ddbf-47b2-ab0d-34d6c3b795b9.webp"></figure>4. Insert Diffuser to Main Ring”. The Main Ring has a groove into which the Diffuser should be inserted and sit steadily. The flat side to the back.<figure class="image image_resized" style="width: 529.148px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/dd5e9b3f-84e4-47dc-8964-6b93b4f6ee46.webp"></figure><figure class="image image_resized" style="width: 527.23px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/3fc14977-a473-4279-b0d1-25f667c08fba.webp"></figure>5. Insert Panel into Main ring. The Panel has cuts at the bottom to avoid cutting the cables<figure class="image image_resized" style="width: 531.08px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/f414f9b5-fc71-4e83-af57-faf01b92199e.webp"></figure><figure class="image image_resized" style="width: 529.148px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/d3004065-f61c-4175-b595-6235c7b8ead8.webp"></figure>&nbsp;If you any question or suggestion write to me&nbsp;Have fun

Ring Lamp with replaceable panels

deco

benlevi

<h2>BLV - AMS Riser Honeycomb Panels Right Left</h2>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/53614/2023-09-30_f45040fceb5bb.jpg">&nbsp;This is an add-on to BLV - AMS Riser, these are left and right honeycomb panelsyou can print and install on the sides panels of your BLV riser.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/53614/2023-09-30_0f580107b10fd.png">

BLV - AMS Riser Honeycomb Panels Right Left

Amélioration X1C

Haydn Bao

<h3>👉All 3mf's include individually optimized profile and material settings for Bambulab printers.</h3>The Modular Attached Storage Stack (<a target="_blank" href="https://modcase.com.au/products/nas?variant=43668432584952" rel="nofollow noopener">link</a>) is a compact 3D printed NAS enclosure with expandable storage support. Delivered by instant download, MASS is a digital product of ready to print files with limitless color options, unlimited spare parts and ongoing updates!<h4><a target="_blank" href="https://drive.google.com/file/d/1wRKaiGE79QRi65ESduj2JVp_4RWADkE1/view?usp=sharing" rel="nofollow noopener">MASS_Instructions.pdf</a> (v1.1)</h4>Enjoy. Like and follow for more cool stuff!&nbsp;Haydn BaoDesigner<h2>Features</h2><ul><li>Modular Body Stackable Drive expansion up to 10x 3.5” + 3x 2.5” drives.</li><li>Fully 3D Printable unlimited colors, spare parts, instant digital delivery and downloadable updates.</li><li>Vertical design Minimal foot print with straight up airflow.</li><li>Customizable Official MODs and optional mounts.</li><li>Simple assembly consolidated parts and 1 screw type for all.</li></ul><h2>Specifications</h2><figure class="table" style="width:38.13%;"><table class="ck-table-resized" style="border:1px dashed rgb(204, 204, 204);"><colgroup><col><col><col></colgroup><tbody><tr><td> </td><td>MASS PREMIUM</td><td>MASS FREE</td></tr><tr><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Drive Bays</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">Up to 10x3.5” + 3x2.5"</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">4x3.5”+ 3x2.5"</td></tr><tr><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">PCI-E Slot</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">1 Slot Low-Profile</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">NA </td></tr><tr><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">PSU</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">SFX, SFX-L, FlexATX</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">SFX, SFX-L</td></tr><tr><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Fans</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">4x 140mm or 120mm</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">3x 140mm or 120mm</td></tr><tr><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">CPU Cooler</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">66mm tall</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">55mm tall</td></tr><tr><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Printer Requirements</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">Min. Bed 210x210mm 240°C Nozzle</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">Min. Bed 200x200mm 240°C Nozzle</td></tr><tr><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Core Size (APU)</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">210x199x162mm 6.7L</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">203x199x151mm 6.1L</td></tr><tr><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Bay Module</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">199x162x150mm 4.8L</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">199x150x150mm 4.5L</td></tr><tr><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Motherboard</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">ITX</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">ITX</td></tr><tr><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Material</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">1-2kg PETG</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">1-2kg PETG</td></tr><tr><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Handles</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">Low profile and standard options</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">NA</td></tr><tr><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Display Mod</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">Top or Sides (Labs feature)</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">NA</td></tr><tr><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Additional 2.5" Bays</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">Optional mounts for 2x2.5" drives in a 3.5" bay</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">NA</td></tr><tr><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Mechanical PBT</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">Optional: use keyboard switch as power button.</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">NA</td></tr></tbody></table></figure><h3>Required to complete</h3>Screws: M3x20 (40pcs) - <a target="_blank" href="https://www.aliexpress.com/item/1005003981975435.html?pdp_ext_f=%7B%22sku_id%22:%2212000027634066519%22%7D" rel="nofollow noopener">Link</a> Power Button: Ø16mm - <a target="_blank" href="https://www.aliexpress.com/item/1005003623296396.html?pdp_ext_f=%7B%22sku_id%22:%2212000026547329693%22%7D" rel="nofollow noopener">Link</a>&nbsp;<h3>Download backups: </h3><a target="_blank" href="https://drive.google.com/file/d/1wRKaiGE79QRi65ESduj2JVp_4RWADkE1/view?usp=sharing" rel="nofollow noopener">MASS_Instructions.pdf</a> (v1.1)<a target="_blank" href="https://delivery.shopifyapps.com/-/9ae7a4af5f0c2fe7/0d88a691b57bec15" rel="nofollow noopener">MASS_FREE.zip</a> (v1.1)<h2>FAQ</h2>▶How much does it cost to print?1-2kg of filament. MASS is tested on generic PETG. You can typically find 1kg rolls for $13/kg each (<a target="_blank" href="https://www.ebay.com.au/itm/155179063326" rel="nofollow noopener">Link</a>), $12/kg if you buy 4 (<a target="_blank" href="https://www.ebay.com.au/itm/155179063326" rel="nofollow noopener">Link</a>), $10/kg if you buy 10 (<a target="_blank" href="https://www.ebay.com.au/itm/133654876065" rel="nofollow noopener">Link</a>). &nbsp;▶Premium vs Free difference?Premium has PCIE slot support, holds 5 drive per caddy, supports up to 13 drives, has handles, extra 2.5” drive adapters, Flex PSU bracket, addon Fan modules and ongoing updates. It supports development of more awesome designs.&nbsp;▶Can Free version use premium modules?No. MASS Free Version was the original model without PCIE slot, making it slimmer by 11mm on the width of the tower, and thus not compatible with the PCIE equipped Premium model.MASS Free is still a potent enclosure with 4x3.5” bay support and can technically stack up to 8 drive bays using M.2 HBA.&nbsp;▶Is MASS durable?MASS is built with an intimate understanding of the non-anisotropic strength properties of FDM. The parts are appropriately designed to overcome layer splitting issues by orientation and print settings. MASS development is committed also to ongoing improvement to ensure it is a durable and reliable option for your NAS setup.&nbsp;▶How to connect more than 4 drives?To expand the beyond the 4 sata ports on most ITX motherboards, you can install a Low profile <a target="_blank" href="https://amzn.asia/d/0uUTo9h" rel="nofollow noopener">PCIE SATA card</a> on the premium model. You can also use an <a target="_blank" href="https://www.aliexpress.com/item/1005004417694518.html" rel="nofollow noopener">m.2 SATA controller</a> to add a few more.

auto

film

outil

deco

Amélioration X1C

cool electronique