Bartsch Labs

cover

20250128_224200(1).jpg

20250128_224153.jpg

20250128_223755.jpg

20250128_224128.jpg

DEWALT TOUGHSYSTEM 2.0 Small Bin Lower Divider

20250110_150322.jpg

20250110_165525.jpg

20250110_165544.jpg

20250110_165555.jpg

20250110_165612.jpg

20250110_165620.jpg

20250110_165643.jpg

Case (TPU) for the Samsung Galaxy S23 FE

Samsung Galaxy S23 FE Case (TPU)

DEWALT TOUGHSYSTEM Small Bin Lower Divider & Ring

Good model, thanks.  I had to shrink the length to fit on my A1 Mini plate.  I also drilled two screw slots which turned out quite messy -- first time drilling through PLA.  If I could make one suggestion, it would be to add perforations to the sides so that so much filament is not used for the model.

jakobgeltinger

Dishwasher pod tab tabelt container

0.24mm layer, 3 walls, 15% infill

Turned out great.  My grandniece loves it.  She used a Sharpie to colour it.

3dMissPrints

Little Knitted Mother & Baby Bunnies

Quick Print - Hand Paint Eyes w Black Marker (AMS & NON AMS)

Printed in Bambu Lab PLA Matte White on the Textured PEI Plate of the A1 Mini.  I find that I have to clean the plate well with dish soap before printing any model like this that prints so close to the edge.  One fingerprint on the plate caused the first layer error you see in the photos. 

Great design.  I love the idea of using less filament for a reusable spool.

TJzDesign

Refill Spool V2 (180mm) (Old Version)

0.2mm layer (60g ABS, 74g PLA/PETG)

A little stringing in one area, but otherwise perfect.  Stack broke apart easily.  Printed in Duramic Black Matte PLA.

A1 mini 7x7 Multiboard side tile trim fit

0.2mm layer, 3 walls, 15% infill