barath.csaba.88

Torikami

Articulated Geodude with reinforced hinges tested by my 4 year old son It prints in place, no supports or assembly required, and is PLA compatible.&nbsp;In addition to the single-color version, I have also included the multicolor version that you can see in my pictures. Enjoy :) See my other models ^_^&nbsp;Gengar: <a target="_blank" href="https://makerworld.com/en/models/387774#profileId-288404" rel="nofollow noopener">https://makerworld.com/en/models/387774#profileId-288404</a>Jigglypuff: <a target="_blank" href="https://makerworld.com/en/models/405142#profileId-307002" rel="nofollow noopener">https://makerworld.com/en/models/405142#profileId-307002</a>

Geodude - Flexi Articulated Pokémon

pokemon

JamesThePrinter

&nbsp;This woven organizer is part of my Woven Series. You can view all of my Woven Series models in <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/18924" rel="nofollow noopener">this collection</a>. I originally pictured this sitting on my desk, holding everything that didn't fit in the pencil holder. But as I designed it, I thought to use it for tools, sitting next to my printer or just to hold my spare Szechuan sauce! The size of this model was very intentional. It was designed to fit on my Prusa Mini at a 45 degree angle. This size allows many more people to enjoy the organizer since it will fit on almost any bed size.<figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1360890085/draft/2023-09-22_rdrffeaj8ufu.png"></figure>For best results, print using a 0.2mm layer height. The majority of the print will be perimeters. Because of this, infill is not necessary.2 versionsOne with dividers and one without dividers&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The filament used in the pictures above is polymaker PolyTerra Army Beige PLA

Woven Desk Organizer

ajánlás

Golub17

Update  I have accepted all valid criticisms of the stem model. Even though I tried to make the branches thicker and tested many types of supports, it was not enough. Therefore, I made a new remixed model with my own self-modeled leaves. These are printed on the bed (unlike the old ones in the air) and positioned afterwards using heat.I would like to thank you all for printing, sharing your pictures, and commenting. Now, let me address the licensing and give proper credit to the original creators: Rose (original) - The original model was made by <a target="_blank" href="https://www.thingiverse.com/marsmathofficial" rel="nofollow noopener">marsmathofficial</a> on Thingiverse and published under CC BY-NC-ND 4.0 DEED, which means the model can be shared and distributed in its original form. DO NOT SHARE REMIXED VERSIONS OF THIS MODEL I am also sharing the original model; therefore, I am still respecting the CC BY-NC-ND license the original creator chose. Stem (remixed) - The original model was made by <a target="_blank" href="https://www.thingiverse.com/richardtracy" rel="nofollow noopener">Richard Tracy</a> on Thingiverse and published under CC BY 4.0 DEED which means the model can be shared and distributed in its original form or remixed. Base (original) - The original model was made by <a target="_blank" href="https://www.thingiverse.com/richardtracy" rel="nofollow noopener">Richard Tracy</a> on Thingiverse and published under CC BY 4.0 DEED which means the model can be shared and distributed in its original form or remixed. Vase - That's mine, made through MakeMyVase on MakerLab, nothing extra about it. Printing and processing instructions: Rose - should print as it is, i personally like the silk pla look. ;New updated stem (flat leaves) has no printing issues; Stem (old) - this is a tricky one, in an older post here by erin.wang, many had issues printing it. My remix addresses some of these by making the leaf stems thicker and painting custom supports, also, the stem is now longer and looks better in a vase. Print profile has fuzzy modifiers on leaves i personally like them that way. Print instructions: - use high-quality filament, which will prevent 90% of problems - if you encounter any issues, manually set the print speed to 50% (this gives layers more time to cool down) Post process instructions: 1. very carefully remove supports, start by small pieces from leaves and work your way down to the stem 2. carefully trim any excess material  3. use heat to remove stringing (i used a cheap filament your results may be better) and carefully heat the branches under leafs 4. pose leaves to a more natural position while the branches are heated Base - should print as it is, i personally like the fuzzy look. Now something about the rose model, i made myself one modification to it. And that is the hole at the bottom so the final gluing would be easyer. Sadly i cannot share this model with you here or anywhere since the original creator forbids sharing of a remixed model. But i can give you quick instructions on how to do it yourself, that far CC BY-NC-ND cannot reach. 1. Export the model from bambu studio (File - Export - Export all objects as STL) 2. Import in Blender (File - Import - STL) 3. Go to edit mode 4. Select the inner most ring on the underside (use select circle an maneuver around) 5. Press “S” to scale down (move your mouse to scale, click to confirm) 6. Press “E” to extrude (move your mouse to extrude, click to confirm) 7. Export the model from blender (File - Export - STL) 8. Add model to the bambu studio in the original rose profile Even better solution by <a target="_blank" href="https://makerworld.com/en/u/2175230856" rel="nofollow noopener">@tweaqr</a>In Bambu Studio Right click on the rose --> Add nagitive part --> cylinder Click OK to the message box Select Scale from the top toolbar and set the size to 4mm,4mm,4mm Select Move from the top toolbar and set the position to X 0mm, Y 0mm, Z-15mm

Rose with Stem (remix)

print

Encrust3d

This is a tool to help lube the Z axis lead screws for the Bambu A1 printer. I designed this tool to be able to fit inside the slots on the Z axis of the A1 printer and, when you are done spreading the lube, you can rest this tool down on a flat surface without that surface getting grease on it. The spreader is angled so you can spread at an angle like the video shows.