nice solid unit, keep in mind you will need to print out a spacer (or find a different solution) to sit in one of the slots if you have shorter sticks, I have a bunch of 100mm ones and they only go about 2/3 of the way up making it hard to get them out, that’s a consumable purchase issue not a print one, this print is awesome

it came out nice, make sure you have a purge model to print at the same time as all of this came from this one print, and this was limited to 3 colours instead of the 4 in the design

nice and simple, perfect for what it’s designed for

came out looking really nice and feels solid

I really like the aesthetic of this and it prints out really nice but it’s not a very practical design, having the tops of all the different cable ties lined up looks good but it makes it harder to get the right size if your after ones in the back, also the volume you can hold in each slot isn’t particularly large, if your getting small packs maybe 50 pieces of each size and not using them often maybe it would be nice but for regular use it’s not great

these are really really nicely done, I’ve stacked 2 together as they are 1/2 the height of the rest of the items

these are really really nicely done, even though it does use quite abit of material I appreciate how solid it is since it’s being stored in a hot garage

these are really really nicely done, even though it does use quite abit of material I appreciate how solid it is since it’s being stored in a hot garage

these are really really nicely done, even though it does use quite abit of material I appreciate how solid it is since it’s being stored in a hot garage

came out really nice, fitted perfectly into the lid opening of the containers, was slightly annoying for filling the desiccant as it needs to be done before fitting into the lid but that’s just how the unit needs to be with the space requirements, overall really happy with it

really nice print, a shorter wider option would be good as I have semi circular and extra wide blades that don’t quite fit flat in this

came out really good, used this for extra long jigsaw blades

these came out really nice

This design is really great, having it in 2 parts to allow the screws to be hidden away is a very nice choice, I did mine in petg and it didn't come out as clean as I would have liked but that was 100% a settings thing on my end,

nice and clean with a good amount of space, the handle is a nice touch

simple and perfect for the use, your unable to use a few of the magnets due to the depth of the slider but that's not really an issue and the designer does mention that in the write up

I've got a terrible memory and have the AMS up high so this makes it much easier to see where I've installed the spools

comes out looking really cool, only issues are with the springback elasticity for pla and petg, after not very many uses the arm no longer will return to its original form causing it to lose most of its firing abilities, that's not a design issue (which is great) more a materials issue

these are nice and solid, uses more filament but unlike others I have used I'm not worried I may snap it if I'm rough

great simple unit does exactly what it's supposed to, wipe down the plate before and after every print with some isopropyl alcohol