awalk.1020

kantiszak

The flowers are flat, your love is not! Just in time for Mother&#39;s Day! &nbsp;Being “flat” these are a great option to pop in a bubble mailer with a card and send something sweet when fresh will just not do. Print up a bouquet that will last! Maybe your dear has severe allergies, or cat that won&#39;t stop at what will kill them! Or maybe you just want to show mom you&#39;re putting that engineering or design degree to work!&nbsp;These were a lot of fun to design, build, and more to mix and match and invent new flower facsimiles!&nbsp;Works great with AMS, but totally prepped for a single spool setup. File is split into 5 plates, one with just stems if you want to print those all in batch, and then a plate for each of the individual flower models with their original matched stem. 2 notes:<ol><li>CORNFLOWER STEM NEEDS A BRIM! everything else printed fine without for me. I actually printed those separate with a 5mm brim after a few spaghettis.</li><li>Everything is mix and match 3mm x 5mm opening for stems except the lily of the valley, which is 3mm x 3mm. The rose stem has a wider notch to accomodate 2 layers of petals, but honestly, since the stems are tapered, I have been able to stack up layers on the tulip and daisy stems as well without petals being loose.</li></ol>Please share photos of your prints. My little engineer who helped (who calls me “Mom”) wants to see!

Mailable Flat Flower Bouquet! Mail your love!

garden

pbbence1994

My next kit card is based on the famous P51-D Mustang warbird. Looks Best with silk silver filament. Cut the parts out with pliers, nail sissors or hobby knife. The assembly is easy and self explanatory. The parts should fit together tightly, but you can always use a bit of super glue to secure the parts together. If you don't need the frame I uploaded the model without it. Please keep in mind that the fine texts and details require very fine lines on the first layer so you need perfect bed adhesion. I recommend to use some adhesion spray like 3dLac. Stay tuned for more kit card planes! Have fun printing it!

Plane Kit Card (P-51D MUSTANG)

planes

Andifanti

Multiple mobile phone holder for max. 4 people. With built in cable duct for extra cable management. Suitable for family households, shared flats or mobile homes. Small and easy to print

Multiple phone holder

camper

Mdesign

Folding bunny box, colored version. Enjoy it ! :)

Colored bunny box

spring

bayfaire

This keycap uses my cherry mx base <a target="_blank" href="https://makerworld.com/en/models/17038" rel="nofollow noopener">https://makerworld.com/en/models/17038</a> and a multicolor print profile has been provided to print the donut, the donut cream, and the sprinkles + the keycap itself in 4 different colors of your choice.&nbsp;This keycap is meant for cherry mx switches.

Donut Keycap for Cherry MX Keyboards

key cap

CopyKnight

German Upgrade Part V2 with new Print Profil.Upgrade Part V2 with new Print Profil.Upgrade Part with new Print Profil.&nbsp;Weekly planner for tablets with Braille and sliding doorsSimple printing and uncomplicated assembly. Everything can be printed with a 0.2 layer height and a 0.4 nozzle without support. The sliding doors should ideally be printed with a 0.1 layer height. It is important that the concave insert is printed upright, as this creates a rounder surface for the sliding doors.Assembly:Part 1: You have the lower part in front of you.<img src="https://makerworld.bblmw.com/makerworld/draft/577182/2024-02-04_3523f3fa0ffbc.jpg">Part 2: Now add the concave insert.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577182/2024-02-04_b643b32d2c793.jpg"></figure>Part 3: Insert the concave insert, with the seven small roundings facing upwards, into the recess provided in the lower part.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577182/2024-02-04_3f9e8d967fa53.jpg"></figure>Part 4: Now add the convex insert.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577182/2024-02-04_602a29d8ad115.jpg"></figure>Part 5: Insert the convex insert into the concave insert<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577182/2024-02-04_81e50700994c2.jpg"></figure>Part 6: Now add the pill insert<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577182/2024-02-04_e15b5c906feee.jpg"></figure>Part 7: Insert the pill insert into the recess provided in the lower part<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577182/2024-02-04_acdca7eb26615.jpg"></figure>Part 8: Add the sliding doors<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577182/2024-02-04_4bb638fd5c4dc.jpg"></figure>Part 9: Slide the sliding doors into the pill insert from the front and push it through the recess provided between the convex and concave insert. Slide all the doors back and forth a few times and leave them for the time being at approx. half of the middle compartment. Now do this with all the other six doors.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577182/2024-02-04_c17b18f563d9a.jpg"></figure>Part 10: Now add the top section.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577182/2024-02-04_5165d6671bf3b.jpg"></figure>Part 11: Place the top section from above evenly and parallel over the model you have assembled so far. Once you have overcome the first small hurdle and all four sides of the inner inserts, press the upper section further down until it snaps into the lower section.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577182/2024-02-04_02deab1933dc6.jpg"></figure>Finished :)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577182/2024-02-04_8a897f5216f9b.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Wochenplaner für Tabletten mit Blindenschrift und SchiebetürenEinfacher Druck und unkomplizierter Zusammenbau. Es kann alles mit einer 0.2 Schichthöhe und einer 0.4 Nozzle ohne Support gedruckt werden. Die Schiebetüren sollten im besten Fall mit einer 0.1 Schichthöhe gedruckt werden. Wichtig ist, dass der konkave Einsatz aufrecht nach oben gedruckt wird, da dies eine rundere Fläche bildet für die Schiebetüren.Zusammenbau:&nbsp;&nbsp;Teil 1: Sie haben das Unterteil vor sich.Teil 2: Sie nehmen nun den konkaven Einsatz dazu.Teil 3: Stecken Sie den konkaven Einsatz, mit den sieben kleinen Ausrundungen nach oben, in die dafür vorgesehene Aussparung im Unterteil.Teil 4: Sie nehmen nun den konvexen Einsatz hinzu.Teil 5: Stecken Sie den konvexen Einsatz in den konkaven EinsatzTeil 6: Sie nehmen nun den Pilleneinsatz dazuTeil 7: Stecken sie den Pilleneinsatz, in die dafür vorgesehene Aussparung im UnterteilTeil 8: Sie nehmen die Schiebetüren dazuTeil 9: Sie schieben die Schiebetüren von von vorne in den Pilleneinsatz und schieben diesen durch die Aussparung die zwischen dem konvexen und konkaven Einsatz dafür vorgesehen ist. Schieben sie alle Türen ruhig ein paar mal hin und her und lassen Sie diese vorläufig endgültig auf ca. der Hälfte des mittleren Fachen stehen. Machen sie dies nun mit allen weiteren sechs Türen.Teil 10: Sie nehmen nun das Oberteil hinzu.Teil 11: Stülpen Sie das Oberteil von oben gleichmäßig und parallel über ihr bis jetzt zusammen montiertes Modell. Wenn Sie die erste kleine Hürde genommen haben und an allen vier Seiten der inneren Einsätze überwunden haben, drücken Sie das Oberteil weiter nach unten bis es in das Unterteil einrastet.&nbsp;Fertig :)

Pill Organizer Weekly planner for tablets with Braille and sliding doors Accessibility

useful

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/105804/2023-10-20_99760f885e128.png"></figure>Halloween decorations for A1 mini include：<ol><li>Grim reaper scythe -replace spinning indicator</li><li>Skull -around touch screen</li><li>Bone -replace spool holder</li><li>Haning ghost -stick to LED with double sided tape</li><li>Bat and PTFE tube mount</li><li>Spider by <a target="_blank" href="https://makerworld.com/en/u/313468365" rel="nofollow noopener">agepbiz</a> and PTFE tube mount</li></ol>&nbsp;Recommended filaments: Bambu Halloween Pack<a target="_blank" href="https://store.bambulab.com/products/halloween-pack" rel="nofollow noopener">https://store.bambulab.com/products/halloween-pack</a>Bambu PLA Basic Red (10200)<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833615987" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament?variant=40820833615987</a>

Halloween decorations for A1 mini

for printer

Stefan_schmid91

Skadis Spool Holder with Wood 23mmPlatte 1 - right Platte 2 - leftPlatte 3 - 10x chop

Skadis - Filament Spool Holder - Wood 23mm

skadis

PenolopyBulnick

These earrings are modeled after The Great Wave off Kanagawa, a woodblock print by Japanese ukiyo-e artist Hokusai which is in the Public Domain. This art piece was used as a prompt on <a target="_blank" href="https://www.craiyon.com/" rel="nofollow noopener">Craiyon.com</a> to generate an image, which was then run through <a target="_blank" href="https://shop.thehueforge.com/" rel="nofollow noopener">HueForge</a> (which I have a commercial license for) and further edited to make the final earrings here.&nbsp;&nbsp;Earrings are mirror images of themselves, but I uploaded them separately and they are separate in the print profiles as well if you want to do them the same instead of mirror images. A little loop was added to the top to make it an earring.&nbsp;There are three sizes of earrings and most pictures show the medium size. I will provide print profiles for all individual earring sets as well as one that has all.&nbsp;Attach piece to 2 jump rings and earring (2 jump rings helps it hang right).&nbsp;Color changes are done between layers, as designs done with HueForge are.Layers 1 - 6 : Egyptian Blue (Inland)Layers 7 - 11: Peacock Blue (Hatchbox)Layers 12 - 17: Light Blue (Inland)Layers 18 - Top: White&nbsp;.08mm Extra Fine settings were used with .4 Nozzle.Ironing was used on ALL top surfaces, but this can be a matter of preference.Gyroid infill is used where it is necessary but 100% infill could also be good with how small and thin it is.I use a Prime Tower, but it is small. Possibly not necessary but helps sometimes.&nbsp;<figure class="image image_resized" style="width:61.92%;"><img src="https://makerworld.bblmw.com/makerworld/draft/384759/2023-12-30_acd59845d35b8.jpg"></figure>

The Great Wave off Kanagawa HueForge Earrings

wearables

Wekster

if you like this kind of stuff consider supporting me on my patreon patreon.com/wekster

Jabba the Hutt - articulated

film

Argrafic3d

This perpetual calendar is a nice decor item for your homes

Perpetual Calendar - Home Idea

helpful

Whopper Printing

<a target="_blank" href="https://www.etsy.com/listing/1509591113" rel="nofollow noopener">Get the V-Twin here</a>!&nbsp;Print the weights at a higher infill percentage to actually give them weight (I used 70-80% infill on the weights).This entire print is around 180g of filament, but it's been designed to share parts with my other engines I'm working on as well as the brand new <a target="_blank" href="https://www.etsy.com/listing/1509591113" rel="nofollow noopener">V-Twin engine</a>! This means you only have to print a couple different parts to build whole new engines! Other models coming soon.Join <a target="_blank" href="https://www.patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a> to get every new paid model released for free (only Advanced and Commercial Tiers), including new engines I release!Please post your makes, I love seeing them!&nbsp;If you would like to support me, consider these options:&nbsp;Social Links:<ul><li><a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">WhopperPrinting.com</a></li><li><a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a></li><li><a target="_blank" href="https://whopperprinting.Etsy.com" rel="nofollow noopener">Etsy</a></li><li><a target="_blank" href="https://instagram.com/whopperprinting" rel="nofollow noopener">Instagram</a></li><li><a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">Discord</a></li><li><a target="_blank" href="https://www.tiktok.com/@whopperprinting" rel="nofollow noopener">TikTok</a></li></ul>&nbsp;

Single Piston Engine - Fully Printed Buildable Kit (With Printed Screwdriver!)

Air Zoo

Lilac Rage

Large NASA Logo Wall art.Each color is its own STL file for easy color printing.&nbsp;Raised Logo and Flat version for printing upside down are both included.If you print the flat version, keep it upside down on the build plate.&nbsp;&nbsp;----------------If you like my stuff, check out my patreon<a target="_blank" href="https://www.patreon.com/LilacRage" rel="nofollow noopener">https://www.patreon.com/LilacRage</a>

NASA Logo - Raised and Flat Versions

space

Llλmbda

Another Mario themed piggy bank this time in the shape of the beloved Bullet Bill! &nbsp;SUPPORTS AND NOTES! Bullet Body:The inside of the bullet shouldnt really need supports depending on how perfect you need it, see mine and user printed photo. If you want it to be perfect use the 2nd print profile named body supports. This part is BIG, make sure to have only around 5% infill to save on material&nbsp;Bullet Back: This part should be printed flat without any supports, again keep infill low. The original had a threaded back but it was too annoying to unscrew everytime so this one is just a push fit Arm Connectors: print upright for best quality while supporting the bottom and coming up the sides Arms: I found the best way is to print in the orientation provided with around 15% infill and using tree supports on the arms

Mario Bullet Bill Piggy Bank

mario

IXPatch

This is a simple bird-shaped ocarina that prints without supports.&nbsp;It does produce a variety of sounds that span a bit more than an octave (at least according to my tuner app), but I am by no means a musician… so the tuning is probably completely off. Feel free to edit and tune this model as you see fit.

Bird Ocarina

whimsy

Forest87

This is my personal orange peeler, inspired by other similar product and entirely redesigned! Simplified design with the addition of the Bambulab logo.

The Orange Peeler

USeful things

ByteSlinger

I created this model of the SpaceX Starship with a smoke and fire base that can be used either free standing, or as a tree topper during the holiday season. It can be used free standing or as a tree topper both with or without the optional ‘Smoke and Fire’ base.&nbsp;If you do opt to also print my Smoke and Fire base, it has a hook in it that allows you to easily fix either a string of LEDs or Christmas tree lights inside it giving it a fun and festive glow from inside the rockets fire.&nbsp;There are various recesses of different sizes around the base allowing for lighting cables to be fed out when using it as a freestanding model, and it can perfectly sit over an <a target="_blank" href="https://uk.store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">LED Lamp from Bambu Labs</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079348/design/2024-01-25_b2472c2706554.jpg"></figure>&nbsp;[Update] I&#39;ve uploaded a new version of the base with this light hook moved more to the side to make it much easier to slide the end of a christmas tree through whilst still being able to hook an LED on. All the 3MFs and STLs on this page have been updated with the new design (but I&#39;ve kept the old designs in a separate marked folder should you still want them)&nbsp;The project I&#39;ve included features both parts but on separate plates so you can use that same project regardless of whether you want the base or not.&nbsp;Print Settings<ul><li>Layer Height: Any will do, but for speed, the project I&#39;ve uploaded has been set to 0.2mm (which is what the one in the photographs was printed at, and it looks great).</li><li>Orientation: Print both parts upright as they will be when stood up.</li><li>Support: Tree supports are set up for the ‘wings’ on the starship. No support is required for the Smoke and Fire base.</li><li>Colours: In project I have included I have pre-painted both models for printing in multiple colours. If you wish to just print them in one colour, just right click each model and re-assign their colour to a new filament.</li></ul>AssemblyThe Starship can be used on a tree or free standing on it&#39;s own, but if you do print the base, the star ship just slots directly onto it like this:<figure class="image image_resized" style="width: 56%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079348/design/2023-11-30_5bd5df4f24f81.jpg"></figure>&nbsp;&nbsp;Fitting LEDSTo fit LEDs to the base, just hook the end of them over the bar at the top of the base, then fit the starship ontop:<figure class="image image_resized" style="width: 63.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079348/design/2023-11-30_71613fc61edce.jpg"></figure>[UPDATE]I have uploaded an updated version of the base file with the LED hook moved closer to one edge so it&#39;s now much easier to slide the top of a tree through:<figure class="image image_resized" style="width: 17.93%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079348/design/2023-12-13_999475d75a96d.jpg"></figure>&nbsp;PlacementRegardless of whether you use the base or not, this model can be mounted as a tree topper, or can be used free-standing (for example on a desk or shelf)<figure class="image image_resized" style="width: 40.79%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079348/design/2023-11-30_235c8603e1af2.jpg"></figure> MultiColour Printing (AMS)If you&#39;re interested in printing in multiple colours with an AMS, fear not, the 3mf I have included for this features both models pre-painted in Bambu Studio so you don&#39;t need to spend time re-painting them.If you&#39;d prefer to print in one colour, simply remove the custom paint job on them.<figure class="image image_resized" style="width: 57.44%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079348/design/2023-11-30_ec38649f39008.png"></figure><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079348/design/2023-11-30_85ac3965ca40a.png"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079348/design/2023-11-30_8a8b3438f6a35.png"> Single Colour Printing (No AMS)If you don&#39;t have an AMS, would prefer to just manually paint it yourself after printing, or if you need a super fast print, you may prefer not to use my pre-painted profile. Whilst it looks fantastic, it takes over a day to print and does require an AMS. However, I&#39;ve now added a secondary profile which will print out in the same quality but in one colour. It takes LESS than 5 hours to print both parts, and uses only 125g of filament (again, for both parts, in total)!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079348/design/2023-12-15_c58dc752e3a3d.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079348/design/2023-12-15_b47ed0f41887d.png"></figure> If you have any questions, please feel free to get in touch.

Starship Rocket Model (Freestanding or TreeTopper)

WINTER

Bean Eating Cookies

Apple cookie cutter and stamp with wording “best teacher ever” separate They are cutters and stamp separate. Have a look at my profile for more cookie cutters and stamps! If you have a request don't hesitate to reach out!&nbsp;If you like what I am doing please consider buying me a coffee or tipping.<img src="https://cdn.buymeacoffee.com/buttons/bmc-new-btn-logo.svg?image_process=resize,w_800/format,webp?image_process=resize,w_800/format,webp"><a target="_blank" href="https://www.buymeacoffee.com/beaneatingcookies" rel="nofollow noopener">Buy me a coffee</a>