awake398

JustBe 3D Printing

I actually do print all of the models I upload and that takes a time and filament.&nbsp;Visit my Patreon (in bio or <a target="_blank" href="http://patreon.com/JustBe3D" rel="nofollow noopener">http://patreon.com/JustBe3D</a>) if you are interested in *exclusive* FREE and members only models or a commercial license to sell your physical prints of my models.&nbsp;Can be rescaled just remember not to change the Z axis.I print with a variable layer hight but just uploaded the standard 0.16 base with 0.08 layer heights.&nbsp;Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmFilaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA Overture Space Gray Transmission Distance: 1.4 PLA Overture White Transmission Distance: 4 PLA Kingroon Black Transmission Distance: 0.4 PLA Overture Green Transmission Distance: 1 PLA Overture White Transmission Distance: 4Swap Instructions: Start with Black At layer #25 (1.12mm) swap to Space Gray At layer #33 (1.44mm) swap to White At layer #41 (1.76mm) swap to Black At layer #45 (1.92mm) swap to Green At layer #57 (2.4mm) swap to White for the rest.

Boba Fett

Huforge

kesin yapılacak

3D Paint Lab

Herkese Merhaba;&nbsp;Modellemesi için oldukça zaman ayırdım. Ekstra bir çok fonksiyon ekledim.&nbsp;Eğer tek Ams kullanıyorsanız bu modelde 6 renk var. Tek Ams ile 6 renk basmak için tasarımsal olarak mümkün. İki parça halinde basarak sonradan yapıştırabilirsiniz. Bunun için ekstra bir hazır bir profil ekledim. Yazı kısmı normal ölçülerinde, iç logo kısmını ise %99.70 ölçeklerinde bastım. Birbirine tam olarak oturuyor. Arkadan yapıştırmak için bir halka ekledim. Sağlamlaştırmak ve arkadan gelen ışığın iki parça arasından sızmaması için.&nbsp;<figure class="image image_resized image-style-side" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446948/design/2024-04-28_dc2ba987b62b6.jpg"></figure><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446948/design/2024-04-28_c047a30c33677.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446948/design/2024-04-28_433c74c837f3d.jpg">Duvara Asmak istiyorsanız,Bu kutuyu basmanız gerekiyor.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446948/design/2024-04-28_5ccb1f9b0bb8f.jpg">Ekstra olarak ek parçalar kısmında kapak arkası duvar ayaklarıx4 m3 vida ile montajını yaparak duvardan uzaklaşmasını sağlayarak kablolamada kolaylık sağlayacaktır.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446948/design/2024-04-28_46d271aff534a.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446948/design/2024-04-28_8868ab5a87ac8.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446948/design/2024-04-29_5d238d4d288c4.jpg"></figure>Kutu içine 12 volt beyaz led şerit kullandım. Işığı iyi yansıtması için alüminyum folyo yapıştırdım.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446948/design/2024-04-28_eea9ea1223af2.jpg">Fenerbahçe erkek futbol takımı, <a target="_blank" href="https://tr.wikipedia.org/wiki/Fenerbah%C3%A7e_SK" rel="nofollow noopener">Fenerbahçe Spor Kulübü</a>&#39;nün <a target="_blank" href="https://tr.wikipedia.org/wiki/S%C3%BCper_Lig" rel="nofollow noopener">Süper Lig</a>&#39;de mücadele eden profesyonel <a target="_blank" href="https://tr.wikipedia.org/wiki/Futbol" rel="nofollow noopener">futbol</a> takımıdır.1907 yılında bir futbol kulübü olarak kurulan Fenerbahçe, Türkiye futbol tarihinin başarılı ve en çok taraftarı olan spor kulüplerinden birisidir.&nbsp;Taraftar Lightbox ürünleri ticari kullanıma kapalıdır. Sadece kişisel amaçlar için kullanılabilir. Fenerbahçe, Galatasaray gibi lisans hakları alınmadan kesinlikle satış yapılamaz!  3DPaintlab instagram sayfamda baskılar ve boyama teknikleri ile ilgili deneyim ve tecrübelerimi paylaşıyroum.&nbsp;Herkese iyi baskılar ve boyamalar dilerim…

Fenerbahçe Lightbox

decor

3DPmom

<figure class="media"></figure><img class="image_resized" style="width: 30.59%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/b50369d8-d175-46ad-80d6-b86a1393e919">These are fun rockets with boosters that extend on take-off. I designed two sizes and each contain two parts: the main rocket body and the boosters. The larger rocket has four small boosters and the smaller rocket has one large booster.  These make great little gifts or party favors 🚀&nbsp;<img class="image_resized" style="width: 30.5%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/41d3f34e-0eac-43be-ba01-6c384316d3ca">Layer Height 0.2mmPLA works great15-20% InfillSupports needed for the area around the boosters on the Large Rocket&nbsp;Dimensions of Large Rocket: 4in x 2 3/8inDimensions of Small Rocket: 3 1/4in x 1 7/8in&nbsp;There are two ways you can print these rockets (I included both in their print profiles):<ol><li>Print the complete rocket: this prints great but if you want multi-color for the boosters (and/or fins) it’s going to take some time (I found 8-10hrs)</li><li>Print the boosters first, print the rocket second pausing at layer height 15.6mm for the large rocket and 30.6mm for the small rocket, drop the boosters in and then continue printing. This method is much faster:)</li></ol>&nbsp;In the print profile for the small rocket I included the complete rocket to print on plate #1. On plates #2 &amp; #3 I separated the rocket from the boosters, so they can be printed separately (make sure to print the boosters first:)&nbsp;In the print profile for the larger rocket I included the complete rocket to print on plate #1. On plates #2 &amp; #3 I separated the rocket from the 4 sets of small boosters so they can be printed separately (again make sure to print the boosters first:)&nbsp;Note: supports are needed for the larger rocket at the base around the rings for the boosters. I have included those supports in my print profile. (Also note if you are printing plate #3, I did not include supports in the booster chambers so that they are clear to drop the boosters in:)&nbsp;<img class="image_resized" style="width: 30.6%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/5e3a3622-4ff3-47e6-adc2-303a5155681a">My designs are free for personal and non-commercial use. If you would like to sell them for commercial use, send me a message and we can discuss the details:)&nbsp;<img class="image_resized" style="width: 30.54%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/e757d34e-1fcd-4b04-b6fe-8c0d913c3a49">If you like my work and want to help support it, you can buy me a Diet Coke at <a target="_blank" href="https://www.buymeacoffee.com/3dpmom" rel="nofollow noopener">https://www.buymeacoffee.com/3dpmom</a> Thanks so much!&nbsp;Have fun printing these…they’re a blast 🚀

Rocket with Boosters (2 Sizes)

fay3dlab

i tried making a new type of suspended model for my Star wars collection.. This is a book nook diorama of the famous trench run.. although i didnt have a tie fighter so i changed it to a tie interceptor.. i might do another one with a tie fighter later.. since its printed in 2 parts.. i could also change up the ships..<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/798245/2024-04-01_0e523998b2e09.gif"></figure>The 2 parts are joined together using pegs insert.. the front part has a channel for the LED strips.. its fairly easy to assemble.. just be careful with the laser coming from the tie interceptor.. it goes in between the strings for the x-wing..<figure class="image image_resized" style="width:35.77%;"><img src="https://makerworld.bblmw.com/makerworld/draft/798245/2024-04-01_8b1527dc2f0cf.jpg"></figure>In order to keep the x-wing wings stick to buildplate.. i made a small brimm for it.. you can remove it before assembling the 2 parts together.The book nook measures at 15cm width 20cm height and 20cm deep..&nbsp;If you&#39;re interested in getting the LED strips.. here&#39;s my affiliate link to buy it.. 5V USB RGB LED Strip Light <a target="_blank" href="https://s.click.aliexpress.com/e/_oEk0hDa" rel="nofollow noopener">https://s.click.aliexpress.com/e/_oEk0hDa</a>&nbsp;As always i also prepped the 3mf files for multicolor prints as well.. and remember when printing suspended models.. set the wall generator to arachne from classic.. this will make the slicer print the strings.. and NO SUPPORTS..&nbsp;I hope you guys have fun printing this new version of the suspended book nook<figure class="table" style="height:162.344px;width:960px;"><table style="background-color:rgb(255, 255, 255);border:1px double rgb(179, 179, 179);"><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">If you would like to support me, you can join me on my <a target="_blank" href="https://www.buymeacoffee.com/fay3dlab" rel="nofollow noopener">buymeacoffee</a> page..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">By joining me as a supporter.. you&#39;ll be able to get behind the scenes informationon my current projects as well as future projects..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">And if you&#39;re looking to sell my prints.. you can join my merchant membership tier as lowas USD10 a month..</td></tr></tbody></table></figure>

Book Nook Suspended Trench Run

starwars

Fletch

The Imperial Star Destroyer from Star Wars in kit card form. One of the most iconic ships in the Star Wars universe available to print and assemble. Contains 23 pieces that fit together to form this amazing ship.&nbsp;<figure class="image image_resized" style="width:32.87%;"><img src="https://makerworld.bblmw.com/makerworld/draft/714871/2024-03-08_74e55f987e327.jpeg"></figure>&nbsp;This was a challenging model to create from scratch (for me anyways) in pieces that could be put into a kit card. It went through many iterations and prints before being ready to share with all of you Star Wars fans. There are a few small pieces that have small connections. A profile with each part broken out is available in case there are any issues during assembly.&nbsp;Tips<ul><li>Try not to put too much pressure on the frame when attaching the engines. The engine connection to the frame is rectangular, so make sure they line up.</li><li>Snapping the main top and bottom pieces to the frame has a slight offset on the clips. The first half is easy since you can see the frame, try to align the edges before attaching the other half to the frame.</li><li>Plates on the top side should be assembled last.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/714871/2024-03-08_737c1aea18b258.jpg"></figure>

Imperial Star Destroyer Kit Card - Star Wars

kit card

RuralRoots3D

<div><h1>Summary</h1><div>This is a scan of a small decor item I have. I used photometry and processed this one to be in a printable format! If you print this supports will be needed, let me know if you make it! I hope y'all enjoy!(ZIP file contains obj and the mesh images)</div></div>

Eagle Feeding Chicks in nest

animal

lucamoretti86

ModelDo NOT adjust the size in your slicer!! The layers will not come out right. Do not change the size, this will cause errors in color change compromising the entire print. Use my print profile or you will not get the desired results. It can be printed safely without AMS and on any printer. I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you!&nbsp;Nozzle: 0.4Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Jade White At layer #13 (1.12mm) swap to Gray At layer #14 (1.2mm) swap to Jade White At layer #16 (1.36mm) swap to Charcoal At layer #19 (1.6mm) swap to Mandarin Orange At layer #22 (1.84mm) swap to Jade White for the rest.