atsergio

cuadros 

Badakgil

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Start with Black At layer #7 (0.64mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #15 (1.28mm) swap to White for the rest.&nbsp;

Hueforge Totoro

hueforge 

Ben 3D

Here is a great tool to grease your lead screws using 3oz/85g super lube grease tubes! Put the nozzle tip onto your lead screw and squeeze the tube! Simple and effective!&nbsp;This tool allows you to get to those hard-to-reach lead screws like the back X1C/P1P/P1S lead screw along with the A1 and A1 Mini lead screws.&nbsp;Grease Used: Super Lube 92003 Silicone Lubricating Grease with PTFE&nbsp;<a target="_blank" href="https://www.amazon.com/dp/B0081JE0OO?ref=ppx_yo2ov_dt_b_product_details&amp;th=1" rel="nofollow noopener">Super Lube 92003 Silicone Lubricating Grease with PTFE, 3 oz Tube, Translucent White: Amazon.com: Industrial &amp; Scientific</a>

X1/P1/A1/Mini Superlube Lead Screw Applicator

accesorios 

Magic Studio 3D

"Hello Kitty with Heart 3D Model" 💖🐾 Embrace the charm of Hello Kitty with this delightful 3D model featuring the beloved character holding a heart! This intricately designed piece captures the essence of Hello Kitty's sweetness and innocence in a heartwarming pose. ⚠️ For larger models, remove the purge line at the beginning of printing! ⚠️&nbsp;Bambu Studio Settings: The settings are just a recommendation, however you can print with the settings you are already used to using! • Preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 • Quality → Wall generator → Arachne • Quality → Wall transitioning threshold angle → 50º • Strength → Advanced → Infill/wall overlap → 20% • Quality → Advanced → Avoid crossing walls • Increasing retraction / reducing temperature can help reducing wisps • I recommend always starting with the lighter colors. Recommendations before and after printing:&nbsp;• Use textured PEI sheet• To make the hole for the USB cable input for the LEDs, you can do it with a soldering iron, drill a hole or you can do it with a slicer by adding a negative model in the place where you want to make the hole• For the pieces to give more light, I recommend using aluminum tape on the inside of the back cover• Be careful to clean the table well&nbsp;Materials and tools used to assemble parts:&nbsp;• Aluminum Tape for the back cover • Hot glue pistol to place in the spacing of the LEDs so they don't come off• Soldering iron to make the hole for the USB cable and/or to solder the LEDs with the USB cable with ON/OFF switch• White or RGB LEDs&nbsp;To find out the list of all the components I use, you can click on the link in my description, and you will find it in the first post!

Hello Kitty with Heart

valentin 

Romwba3D

A Cute Christmas Gnome / Gonk split for multi-colour printing, also split to enable printing with just one AMS or all in one with more than one AMS.&nbsp;i have also included a single colour STL file single colour or resin printing&nbsp;I have uploaded 3mf Print profiles for both the X1C/P1P and A1 Mini &nbsp;These are part of My Patreon <a target="_blank" href="https://www.patreon.com/romwba3d" rel="nofollow noopener">https://www.patreon.com/romwba3d</a>&nbsp;I have lots of Gnome / Gonks available on the patreon&nbsp;You can view all the Available Models - now over 220 Models on https://www.romwba3d.com

Christmas Gnome

Navidad 

Murata

<figure class="media"><oembed url="https://www.youtube.com/watch?v=jArIfws3gts"></oembed></figure>I designed this toy for my 3 year old to play with so it is intended to be robust enough to survive rough play, and the bucket is slightly oversized for more fun. There’s also an accompanying <a target="_blank" href="https://makerworld.com/en/models/58279" rel="nofollow noopener">dump truck model</a>.&nbsp;Please let me know if any parts break and leave feedback on anything that could be improved upon in the design.&nbsp;The final model is roughly 80 mm wide and everything is assembled with snaps (no glue or fasteners). The only tool required is a coin to tighten the body and tracks together. And there is a hollow pocket for some old AA batteries to add a bit of weight to the body. These are purely optional.&nbsp;Most moving parts are designed with 0.2 mm clearances which work fine on the Bambu X1C but might fuse on other printers. If any joints are frozen or too tight to assemble, try setting <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/xy-hole-contour-compensation" rel="nofollow noopener">XY Contour Compensation </a>to -0.05 mm. The tracks are offered in two variants, 0.15 mm clearance and 0.2 mm clearance in the raw files. My print came out nicely with 0.15 mm clearance track, but I understand this is not possible on all printers. The tracks show the build-plate side, so they will look a bit nicer if printed on a textured plate.&nbsp;<h3>Build Notes</h3>Be careful to install the H-link build plate face out. It’s a common mistake.&nbsp;When loosening joints for the first time, grab or pry as close to the pivot as possible. If a joint is a little bit stiff, it’s pretty easy to snap a piston by pushing on the end.&nbsp;<h3>History</h3>2024-03-30: Added some extra brim to boom cylinders to help with adhesion.2023-12-04: Minor updates to boom to reduce stuck or broken parts and improve bed adhesion.2023-10-13: Several minor design fixes to make parts more robust. I&#39;ve also included half-length track stls for smaller build plates. You need 4 of these per model. And I&#39;ve included a step file of the assembled excavator so that you can preview different colour pallet ideas. And lastly, there is now a single plate profile that crams the whole thing onto one plate if you&#39;re feeling confident and don&#39;t care about colours.

Tracked Excavator

obra

wuguigui

<h2>Summary</h2>There is a specialized LED Kit for this mushroom lamp on Amazon now:<a target="_blank" href="https://www.amazon.com/dp/B0D75SLLY9?maas=maas_adg_FD4EEC810D7A3AE13B04CDE09F6026DD_afap_abs&amp;ref_=aa_maas&amp;tag=maas" rel="nofollow noopener">Mushroom Lamp Components Kit for 3D Printing</a>&nbsp;Updated 12/03/2023 A new cute pocket-size rechargeable mushroom lamp at: <a target="_blank" href="https://makerworld.com/en/models/12926" rel="nofollow noopener">https://makerworld.com/en/models/12926</a>I made a mushroom night lamp based on the small mushroom I made before: <a href="/thing:4978281" rel="nofollow">https://www.thingiverse.com/thing:4978281</a>It&#39;s easy to assemble, without screws(maybe need a little glue to stick the 9 caps on the head). I recommend LED light（less than 3.5W) with E27 holder for this lamp.If you were in China, you can buy the LED light and holder at: <a target="_blank" href="https://item.taobao.com/item.htm?spm=a1z09.2.0.0.40e02e8dHcE0ZZ&amp;id=654792151126&amp;_u=m25oc3248e8" rel="nofollow noopener">https://item.taobao.com/item.htm?spm=a1z09.2.0.0.40e02e8dHcE0ZZ&amp;id=654792151126&amp;_u=m25oc3248e8</a>Thank you for loving it! :)I also update a new version at( see the image below): <a target="_blank" href="https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-191671" rel="nofollow noopener">https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-191671</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-d431b608-d577-47f1-82e6-16aaae054c9a" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-d431b608-d577-47f1-82e6-16aaae054c9a</a>it has a new structure and is more compact with less filament.other 2 cute mushroom lamps:Mushroom Lamp B: <a target="_blank" href="https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-b-193906" rel="nofollow noopener">https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-b-193906</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-b" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-b</a>Mushroom Lamp C(suit small space 3d printers): <a target="_blank" href="https://www.myminifactory.com/object/3d-print-mushroom-lamp-c-196725" rel="nofollow noopener">https://www.myminifactory.com/object/3d-print-mushroom-lamp-c-196725</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-c" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-c</a>A funny Banana Lamp(free): <a href="/thing:5216983" rel="nofollow">https://www.thingiverse.com/thing:5216983</a>Banana Lamp 2.0: <a target="_blank" href="https://www.myminifactory.com/object/3d-print-banana-lamp-2-0-206292" rel="nofollow noopener">https://www.myminifactory.com/object/3d-print-banana-lamp-2-0-206292</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/banana-lamp-updated" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/banana-lamp-updated</a>My other designs: <a target="_blank" href="https://makerworld.com/en/u/2112721175" rel="nofollow noopener">https://makerworld.com/en/u/2112721175</a><h2>Print Settings</h2>Printer:snapmaker 2.0 A250 &amp; anycubic i3&nbsp;Rafts: No&nbsp;Supports:Yes&nbsp;Resolution: 0.2&nbsp;Infill:30-40%Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=any+PLA%2B" rel="nofollow noopener">any PLA+ </a>any<h2>Post-Printing</h2><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/212286bf-cf1d-4206-8ba1-40d3b8e90a15.jpg" alt="image">&nbsp;Mushroom Lamp Family&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/591e3f47-1d16-47f4-bbe4-0936b7d2f1b5.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/94bf8ef4-12d7-4148-aceb-69a083d8ad55.jpg">&nbsp;Printing with support&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/cf919e6f-b83c-4927-9acf-26c8caa0f570.jpg">&nbsp;Printing without support&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/89291392-bace-4a3b-b8e3-9fbd0593f90b.jpg">&nbsp;Printing without support

Mushroom Lamp

lámparas 

maskedjoey

This model will need support for the tail. And may need some build plate adhesion, because only a small area of the body and legs are touching. Made two versions, one is an ornament version and the other a non-ornament version.

Unicorn pusheen cat ornament

unicornio 

"Afonso Letter Art 3D Model" 🅰️🖌️ Elevate your personal space with this unique Afonso Letter Art 3D model! This intricately designed piece features a prominent, oversized letter "A," with the name "Afonso" elegantly displayed in smaller font, ready to be affixed to the letter.&nbsp;Features:<ul><li>A finely detailed 3D model featuring a large and visually striking letter "A," capturing your initial.</li><li>The name "Afonso" is crafted in a complementary smaller font, designed to be attached to the letter for a personalized touch.</li><li>This design is available for free, allowing you to 3D print and assemble it at your convenience.</li><li>Perfect for showcasing your name or initial in a creative and artistic way.</li></ul>Instructions:<ol><li>Download the STL files for both the large letter "A" and the smaller name "Afonso."</li><li>Utilize your 3D printer to create the individual components.</li><li>Follow the provided instructions to assemble the pieces.</li><li>Attach the name "Afonso" to the letter "A" to create your personalized letter art.</li></ol>Elevate your space with the Afonso Letter Art 3D model. Download it now and embark on your 3D printing journey to display your name or initial in a creative and artistic manner!Share photos of your completed project and let your personalized letter art inspire others with their own creative ideas.

Letter A and name Afonso 

nombres

PrintThatBoii

This is a scalable Christmas tree with shoes because everything is better with some shoes and a face XD. The first tree is at scale 75% the middle is at 100% and the right one is at 50%. You can go bigger if you want. note that the smaller you go the harder it is to get the shoes in. At the scale of 50% you have to push a bit harder than the one on 100%. 3D PRINTING:You can print this with a layer height of 0.2 (for the 50% tree and the shoes) or 0.3mm. You don’t need supports. I would recommend dropping the shoes 1mm lower in the slicer as the shoes are a bit too round in the front. I printed them with 15-20% infill (trees and shoes). If you read this in December, Happy Christmas! &nbsp;I borrowed the shoes from @FatherLicorice and his cute little ghosts. &nbsp;

Cute Christmas tree with shoes

Neebick

Update: I have added a <a target="_blank" href="https://makerworld.com/en/models/146363#profileId-159384" rel="nofollow noopener">scabbard</a> that is designed for this Master Sword.&nbsp;This one was a fun project to see if I could make a master sword that would could be all encompassing for its appearances in Tears of the Kingdom. The party trick being that the center jewel acts as a locking peg for which ever blade is inserted. It's modeled with a tight tolerance so that it will friction fit in. Just press the center of the jewel and the peg will slide out. This allows the blade to be removed. My idea was that this would be more convenient then printing and finishing 3 different hilts for each blade. Storage should be easier as well. Plus its just cool.&nbsp;Glue and supports will be necessary for some parts.&nbsp;I have kept tolerances tight on some parts to help with friction fitting. I've found the blades need a couple insertions before it becomes easier. I figured this was better then a wobbly blade.&nbsp;<h3>Parts</h3><ul><li>Blades - Each blade is designed to be printed upright on the plate. You will need 2 center portions to make a full length blade. I have included pegs which should be glued to join all the sections. I suggest thick walls. I print with 5 walls for good measure. Really helps with flex. Use supports for the peg holes. On the restored blade, I did not include a tip since it is the same as the original blade.</li><li>Cross guard - I have sliced this 2 ways: Sideways for more vertical printing. Excellent cooling is a must. I had very slight sagging towards the top of mine due to the sharp angles of the tips. Or sliced in half for a wider print but easier details if bed adhesion and warping isn't an issue. Supports are a must for both. Focus on the interior portions and tips.</li><li>Grip - Simple part. Print with flared portion on the plate. Make sure to glue it with the cutout portion facing forward. Important for the wrap to be aligned with the cross guard.</li><li>Wrap - This is was a trickier part for me since it kept coming loose from the bed. It doesn't have a very wide base so bed adhesion is critical. Supports and brims help. Has a built in peg to lock it into the proper orientation.</li><li>Jewels and Blade surrounds - Super easy print. Glue peg into jewel with inset on the back. Glue surrounds on cross guard.</li><li>Pommel - Two parts for nicer printing. Use grip to help align while gluing halves together. Can remain removable with future upgrades...</li></ul>&nbsp;<h3>Video Demonstration</h3><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=AtKNojgwpLE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/AtKNojgwpLE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Master Sword with interchangeable blades from Legend of Zelda Tears of the Kingdom 

zelda

Smart3d by Gabriel Gomes

3D model descriptionsuporte para rolos simples3D printing settingslayer 0.2 ou mais mínimo 30% infill

support fillament

soportes 

justinwille9666

Desk OrganizerPretty easy to print.I added the Pencil Box with hexagon Design only. and some hooks to snap on something like a little box.Optimized for 0,44mm line width and 0,2mm layer height.Added a Clip for pens with 10.5mm diameter taht slides into the hexagon.If you enjoy it leave a like and show your prints :)

cuadros

hueforge

accesorios

valentin

Navidad

obra

lámparas

unicornio

nombres

Navidad

zelda

soportes

oficina