Ath.

ByteSlinger

I designed this display stand for FPV style drones.&nbsp;Buy online:If you don't have a 3D printer but would like one of these, I now sell them on my Etsy store here: <a target="_blank" href="https://www.etsy.com/uk/listing/1411458192" rel="nofollow noopener">https://www.etsy.com/uk/listing/1411458192</a>&nbsp;Whilst I built this from scratch, there are a couple already on here that I took inspiration from, but I found them either unbalanced or that they require a crazy amount of support material to print.&nbsp;This doesn't require any support material, and it can hold even larger drones (see pictured my Chimera 7 HD) at a cool looking 25 degree angle very securely.&nbsp;In the pictures you can see it holds a wide range of drones, from my Bumblebee, through the Nazgul5, all the way up to the Chimera 7!If you'd like to check if it will fit your quad in it's default scale, the two prongs are 55mm apart (centre to centre) and are 5mm wide.For most drones, you'll rest your quad with the front arms hooking behind the prongs. If however you have something more like the bumblebee, look underneath your quad and find a pair of holes that will fit them (check there are no cables, components or propellers that the prongs could damage before placing).&nbsp;<figure class="image image_resized" style="width:24.68%;"><a href="https://www.buymeacoffee.com/joshforwood" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/288427/2023-11-16_b48ac1ef59a22.webp"></a></figure>If you like this design, you can tip me via 'Buy Me a Coffee' here: <a target="_blank" href="https://www.buymeacoffee.com/JoshForwood" rel="nofollow noopener">https://www.buymeacoffee.com/JoshForwood</a> Alternatively, if you enjoy my free designs and videos on <a target="_blank" href="https://www.youtube.com/@3DRevolution" rel="nofollow noopener">my YouTube channel</a>, please support me and my channel via Patreon: <a href="www.patreon.com/3DRevolution" rel="nofollow">www.patreon.com/3DRevolution</a> You'll also gain access to the exclusive 3D Revolution discord community, and can get early or exclusive access to additional content including STLs, custom designs, and more!&nbsp;I printed this in PLA at 40% infill with Gyroid infill. You could probably get away with lower infill (especially for smaller/lighter quads), but as I was going to be using heavier quads on it I didn't want to risk it. Even if you do lower the infill for most of it, I'd recommend using a decent amount of infill on the prongs as this is what will be holding back the drone from sliding off so you don't want them to be brittle. Mine at 40% feels rock solid!<h3>Print Settings</h3>Printer Brand:PrusaPrinter: I3 MK3SRafts:NoSupports: NoResolution:0.2Infill: 40%Filament: Filamentive PLA Black Notes:&nbsp;Unlike other stands on here that either require support material or to be printed in multiple pieces, this is a single print in-place stand with no need for any support material.I printed this in PLA at 40% infill with Gyroid infill. You could probably get away with lower infill (especially for smaller/lighter quads), but as I was going to be using heavier quads on it I didn't want to risk it. Even if you do lower the infill for most of it, I'd recommend using a decent amount of infill on the prongs as this is what will be holding back the drone from sliding off so you don't want them to be brittle. Mine at 40% feels rock solid!<h3>Custom Section</h3>This item is not for commercial use!This item is for printing for personal use only. If you wish to use it for another purpose, please feel free to pop me a message. This has been used as prizes in FPV competitions etc which is great and people have been wonderful at getting in contact.Please note, this design is not by "Eric Carrender Garrido" and he has no rights to it's commercial use. He's trying to sell prints of this but please do not encourage him. If you want this item and don't have a printer of your own, pop me a message and I'll see how I can help.&nbsp;&nbsp;&nbsp;

FPV Racing Drone Stand (No Supports Needed)

make 3D

The Perpetual Calendar&nbsp;A fully 3D printed calendar. No Magnets, no bolts, no glue and no screws are needed. Just 3D printed parts.  If you don't have an AMS unit, you can just print the date/month tiles in one color - Then you use a Posca Marker or similar to add the date and months.&nbsp;I seperated each color print (besides the date/months tiles) to individual print plates. Please move these around as you please for faster or more eficient prints.&nbsp;NB: When assembling the calendar please only tighten the axis so you can still move the date and month individually.&nbsp;The indicator tiles needs to be inserted in this order.<figure class="image image_resized" style="width:56.57%;"><img src="https://makerworld.bblmw.com/makerworld/draft/467143/2023-12-30_2ce15f6f96ba7.png"></figure>NOTE: The two housings are not the same.The centerblock one for the days is 31,4mm - The centerblock for the months is 28,8mm&nbsp;If you’re having issues with adhesion in general with your printer - please use the print profile with added brim to the threaded axis. &nbsp;Please have a look at this assembly video I've made. If you follow these steps it's a very simple assembly.<figure class="media"><div data-oembed-url="https://youtu.be/XVZG9G0sLQw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/XVZG9G0sLQw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>This video shows how to orient the date tiles so the calendar works as intended.<figure class="media"><div data-oembed-url="https://youtu.be/AJB0iBZT9bc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/AJB0iBZT9bc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Please make sure you print bed is clean when printing the multicolor parts to ensure maximum adhesion.&nbsp;Due to the nature of 3D printed parts being very light, you might encounter that the tiles won't fall down immediately. If this happens just give the housing a little tap and it should fall into place.&nbsp;My calendar is printed with these filaments:Sunlu PLA+ White (I am having bed adhesion issues with this filament - I recommend Bambu PLA White instead)Sunlu PLA+ BlackBambu Lab PLA Basic Orange UPDATE 31-12-2023:Uploaded a new print profile. Version V1.1Made a few modifications to the two housings so the tiles would fall down more consistently.This update also reduces the print time by more than 1 hour.&nbsp; UPDATE 08-01-2024:Some users have been complaining/leaving low ratings about the ironing of the tiles or bed adhesion.  Please modify this yourself within Bambu Studio if your printer is not well calibrated or maintained.  Also, make sure your printer bed is clean from any grease.  I've had zero issues with my own prints. both ironing and bed adhesion.  Printed on a P1S.&nbsp;&nbsp;

FPV

默认