asianlth

筋斗云の点线面

平时经常会有一些细碎的垃圾需要放置，如果直接放置在车辆的杯架内显得很凌乱，所以专门设计一款翻盖式的车载杯架垃圾桶，翻盖的方式在倾倒时更加方便，同时开口也更大。1.翻盖需要从地面的支撑；2.打印材料推荐ABS（车内温度有时候可以达到70°），也可以用PETG；3.壁厚：≥4周；最后祝打印快乐！！&nbsp;

车用杯架垃圾桶-筋斗云

模型

Jan 3D

Bambu Lab Storage System&nbsp;UPDATE 24.11.2023Now with new LID for Full Hotends here is the LINK:<a target="_blank" href="https://makerworld.com/de/models/72681#profileId-77205" rel="nofollow noopener">https://makerworld.com/de/models/72681#profileId-77205</a>&nbsp;This is a newly developed storage system for all the Bambu Lab printers X1C / P1S, /P1PThe goal was to store all spare parts as well as the glue stick and the Allen key in one box. This was realized as space-saving as possible.&nbsp;The dimensions of the closed box are: 181mmx126mmx32mm&nbsp;The following parts can be accommodated: - Four hotends with all accessories (silicone sock, holders for the thermister as well as the corresponding screws). - Four nozzle wipers + mounting screws - Spare filament cutter - Nozzle cleaner - Glue stick from Bambu Lab - Allen wrench supplied - three times each Lubricant Grease and Thermal Grease&nbsp;The two parts are not joined together, the lid is just put on. &nbsp;Im happy to adapt my design if you want something changed, just contact me and we can work something out.&nbsp;Also look at may other Storage Box:<a target="_blank" href="https://makerworld.com/de/models/47503" rel="nofollow noopener">https://makerworld.com/de/models/47503</a>

Bambu Lab - Tools and Accessories Box

模型收藏

kevr102

This is a Handy 3D Printed Vice created using Fusion 360 and printed with the Bambu Lab X1 Carbon.It took a few iterations with mainly the screw drive to get this correct, but all in all a great little project.It would have been ideal to run through the main frame thread with a tap as it was a bit tight but I didn't have one so I applied some of the grease that came with the X1 and this worked well after a few turns of the screw in and out.I made a slotted adapter which fastens onto the end of the thread with a 5mm Allen head set screw, this in turn slots into the slider carriage and is secured in place with a 5mm Allen head set screw allowing the carriage to be retracted easily, trying to get the thread started on the collet with a 5mm Allen bolt it snapped off, I just screwed the bolt into the remaining part and it works perfectly.Great little vice which can be used for numerous applications like holding components for soldering etc.The initial mainframe didn't have any fixing holes so i added 4 with a countersunk.Thanks for looking.buymeacoffee.com/kevr102

Handy Vice Designed with Fusion 360 and Printed with Bambu Lab X1 Carbon

工具

Asdfgasdfg

Be careful downloading prints called “Fast” etc, those might be faster but that's because of a weaker design, they are spammers just taking the original profile, lowering the integral strength to get it to print faster, and as explained below, there needs to be a balance in the force of the spring and the rubber band. Those profiles might not work as well as intended. Its just spammers racing to the bottom, give them enough attention and soon there will only be profiles with 1 wall and 2% infil thats printed in 5 minutes but falls together if you look at it long enough.&nbsp;Double action OTF fidget toy for the fidget toy design competition.&nbsp;All you need is plastic and a rubber band!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/234870/2023-11-13_2404c2f7a37e2.gif">&nbsp;If you like the idea but dislike the design bookmark the model and visit it after the competition is over and I will release all the source file so you can easily modify the body or blade/comb!&nbsp;<h2>Assembly instructions:</h2>NOTE: For the double action to work you need to have a balance between your rubber band and the springs holding the blade. You can use the strongest rubber band you can find and it wont really matter, but the switch will be harder to push. So you might want to try around with different rubber bands or different materials for the springs. If the switch is to hard for your liking, your rubber band is to strong. If the blade/comb does not fully extract or retract, your rubber band is to weak or your springs are to stiff.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=rN4wuBX-5q8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/rN4wuBX-5q8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;<h2>How it works:</h2><img src="https://makerworld.bblmw.com/makerworld/draft/234870/2023-11-18_6157ed5d0cf8b.png">

模型

模型收藏

工具

玩具