ashendream

Scubafan

Update 03.06.2024:Created old inserts for the 70mm and 112mm handle. You find them in the STL folder.Update 02.06.2024:Created inserts with left and right slotsAdded more SpacerCreated some end piecesReorganized the STL foldersReorganized the print profilesUpdate 01.06.2024:Thanks to <a href="/en/@OompaLoompa" rel="nofollow">Oompa Loompa</a> i was able to create a insert for the 70mm and the 112mm handle. Update 30.05.2024:Added a full slot insert for 105mm handle with wrenchAdded a print profile for the full slot insersUpdate 29.05.2024: Added handle inserts with a full slot for the bladeAdded more spacers&nbsp;I created some Gridfinity inserts for my Wera screwdriver. I could never find anything to fit my needs because my screwdriver have been to long or short. I had too much or not the right handle size.My goal was to fit as many different screwdriver in one box. That is why i designed them in half grid and the slot for the blade is always 10mm.I do have 3 handle sizes but Wera produce a couple more. But I think I do have the most common ones.Just measure the length of your handle to find the right box for your screwdriver.&nbsp;I created inserts for the standard (green/black) 81mm, 98mm and the 105mm Handle and because of the 10mm slot you fit the VDE (red/yellow) in the same inserts.I also created a insert for the 900er series (yellow/black) with a 105mm handle and an insert for the 817R.Because of the different blade lenghts you will get gabs between the inserts. There are spacers to fill the gabs.&nbsp;Please let me know if you have ideas to improve the inserts.&nbsp;&nbsp;

Gridfinity Universal Wera Screwdriver Inserts

gridfinity

SabreDesign

Modern planter with legs, available in two sizes with opening of 115 mm and 72 mm for the smaller pot.  Legs need to be superglued under the pot into their dedicated slots.&nbsp;If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below and on my profile:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000396295/design/2024-03-26_e2df7058ca57a.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000396295/design/2024-03-26_c00fec6bee5f9.png"></figure>

Planter with legs

plants

paolobonidesign

The RingTree is a napkin holder designed with a tree theme, featuring decorative elements that evoke the imagery of a tree. This unique and aesthetically pleasing holder is not only functional for keeping napkins organized but also serves as a decorative piece with its tree-inspired design, adding a touch of nature and charm to any dining or kitchen setting.

RingTree - Tree themed napkin holder with decorations

kitchen

JamesThePrinter

These Easter eggs are larger than normal. Actually, they are about the size on an emu egg! I would suggest that you choose 1-3 eggs and display them together. Adding extra eggs printed at varying scales can also look very nice. I have successfully tested them down to 25% scale with the exception of the Lattice Egg. The lattice is a retraction nightmare at smaller sizes. They should scale upwards without issue as well, but beware - they are pretty large already!&nbsp;Check out my other holiday models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/23941" rel="nofollow noopener">here</a>.&nbsp;Print SettingsBecause of the size, these eggs take a while to print. I found that I could speed up that process by limiting infill to critical areas only. Most of the examples above were printed at 0.2mm layer heights.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>MatterHackers Quantum Blue Raspberry PLA</li><li>MatterHackers Quantum Green Raspberry PLA</li><li>MatterHackers Quantum Blue Yellow PLA</li><li>MatterHackers Quantum Blue Green PLA</li><li>MatterHackers Quantum Silver Gold PLA</li><li>MatterHackers Quantum Pink Purple PLA</li></ul>

XL Easter Eggs

deco

mars730

Total Height：60mm Tube Height：20mm Top Outside Diameter：60mm Tube Outside Diameter：10mm Tube Taper Angle：2.5° Tube Tip Angle：30° Wall Thickness：1mm Hanging Ring：true Vent Ridge：true Ridge Thickness：1.5 No Support&nbsp;I print using PLA. I strongly recommend printing this in PETG due to its excellent chemical resistance.https://www.printables.com/model/71402-parametric-funnel-redux

Exquisite funnel

tools

happyboard.company

The Version 2 of the swirled lamp shade I created.&nbsp;Its as easy to print, as the first version. Orient it upside down and hit print. Set the seam alignment to random for a better result.&nbsp;You'll also need the LED Hardware Kit 001 adapter and the hardware Kit 001 itself. You can find a print profile of of the adapter on this page, or you can download it from the official Bambu Labs account. I altered the bajonette adapter for a quite tight fit. You will need some force to get it into place, but it will fit tight and snug. &nbsp;I used Bambu Lab PLA Marble for this lamp. &nbsp;0.2 mm layer height3 walls22% gyroid infill

Swirled Lamp Shade V2 for LED Kit 001

Lamps

cz32532

Warning wall sign

signs

Additive Atom

<a target="_blank" href="https://shop.thehueforge.com/collections/hueforge?aff=3" rel="nofollow noopener">HueForge</a> Fire Dragon created for the <a target="_blank" href="https://us.polymaker.com/products/hueforge-packs?variant=41308303687737?aff=507" rel="nofollow noopener">Polymaker Fire Color Set</a>. Only manual filament swaps required.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments used <a target="_blank" href="https://us.polymaker.com/products/hueforge-packs?variant=41308303687737?aff=507" rel="nofollow noopener">Polymaker Fire Color Set</a>:<ul><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233?aff=507" rel="nofollow noopener">Polymaker PolyTerra PLA Charcoal Black Transmission Distance: 0.3</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345875513?aff=507" rel="nofollow noopener">Polymaker PolyLite PLA Red Transmission Distance: 1.5</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345744441?aff=507" rel="nofollow noopener">Polymaker PolyLite PLA Orange Transmission Distance: 7.5</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=40603478360121?aff=507" rel="nofollow noopener">Polymaker PolyLite PLA Lemon Yellow Transmission Distance: 6.5</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345941049?aff=507" rel="nofollow noopener">Polymaker PolyLite PLA White Transmission Distance: 5</a></li></ul>Swap Instructions:<ul><li>Start with <a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233?aff=507" rel="nofollow noopener">PolyTerra Charcoal Black</a></li><li>At layer #9 (0.8mm) swap to <a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345875513?aff=507" rel="nofollow noopener">PolyLite Red</a></li><li>At layer #12 (1.04mm) swap to <a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345744441?aff=507" rel="nofollow noopener">PolyLite Orange</a></li><li>At layer #21 (1.76mm) swap to <a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=40603478360121?aff=507" rel="nofollow noopener">PolyLite Lemon Yellow</a></li><li>At layer #31 (2.56mm) swap <a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345941049?aff=507" rel="nofollow noopener">PolyLite White</a> for the rest.</li></ul>

Fire Dragon - HueForge Filament Painting

HueForge

The Big Greek

Infiniti Calender&nbsp;A nice little infinite calendar.&nbsp;Easy Print - No Supports needed.&nbsp;I printed it in matt black and orange PLA, maybe it's even nicer in glossy colour.The deck is 200x200mm. You can scale it freely if it is too big for you (A1 MINI User).&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464559/2023-12-25_71ebc42e790ac.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464559/2023-12-26_511651dde5ef6.jpg"></figure>&nbsp;I have added 2 different holders. If you print both you can hide the one in the other.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464559/2023-12-24_21e0195597204.jpg"></figure>&nbsp;There are also holes on the back so you can add magnets to hang the calendar on the fridge or wherever.( I make the sign for my wife, don´t know why she wantet it you can find it here if you like it <a target="_blank" href="https://makerworld.com/de/models/90880#profileId-97241" rel="nofollow noopener">https://makerworld.com/de/models/90880#profileId-97241</a> )&nbsp;The size of the magnets is 5x3mm&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464559/2023-12-26_495722185ce48.jpg"></figure>&nbsp;I didn't add the calendar year so that you can always use it.&nbsp;I also find the gaps very useful so that you can leave a note.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464559/2023-12-26_6e809a80ae275.jpg"></figure>&nbsp;There are a few print profiles available, from fast, smooth, fast and ironing and of course smooth and ironing, etc.you have the choise also the colours is up to you.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464559/2023-12-26_a36a069728c75.jpg"></figure>&nbsp;&nbsp;Here is a short guide for users who may not know the function for changing the colour in the print profile.&nbsp;Let´s start&nbsp;You can certainly colour each individual part by hand with this toolbut this is very complicated and that's why the calendar is designed so that you can change it more easily.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464559/2023-12-26_d95af1535af59.png"></figure>&nbsp;First look and search for process and click on objects&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464559/2023-12-26_f1a8136cbc794.png"></figure>&nbsp;Then you should see this menu and on the left side the individual objects that you can change. In this case it is days of the week, the logo, month, days(Numbers) and the calendar itself.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464559/2023-12-26_3b4047c6cac06.png"></figure>&nbsp;&nbsp;Select the colours you have (you can see this in your AMS) and change them on the right-hand side. look at the following picture&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464559/2023-12-26_22dfb27b154f6.png"></figure>&nbsp;Once you have done this, you can start printing and have a nice colour design(I like orange and black )&nbsp;I think you should be able to do this with the short instructions.Now have fun playing around and please show me your results&nbsp;If you like, have a look at my other stuff too&nbsp;If you like my work/project consider supporting me with these options:<ul><li>leave a like</li><li>leave a comment</li><li>download the file</li><li><a target="_blank" href="https://www.buymeacoffee.com/thebiggreek" rel="nofollow noopener">or By me a Coffee</a></li></ul>&nbsp;Have fun printing and If you like the project, simply like and download it.

Infiniti Calender 

sonstiges

Benjamin Kott

<h3>Organizer Box (Fully Parameterized) with Fusion 360 Source Files.</h3>Use the available print profiles if you want to have a specific size, if you are more into tinkering fetch the Fusion 360 file and enjoy all the customizable parameters. The model is designed so that all punch holes are auto-calculated and evenly spaced. No need to fiddle around with manual settings, just define the basic parameters and watch the magic math 😊. Punchhole rows are auto-calculated and will center on the outer wall.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/_2nHOIhereM"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/_2nHOIhereM" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>Customizable Parameters:</h3><ul><li>Height</li><li>Width</li><li>Length</li><li>Wall thickness</li><li>Punchhole Diameter</li><li>Punchhole Spacing</li><li>Corner Radius</li><li>Save space on the top and bottom</li></ul><h3>Customizing Tips:</h3><ol><li>If you adjust the width and length, it can be helpful to adjust the corner radius before making changes.</li><li>If you adjust the corner radius, ensure that the desired size fits your desired width and length.</li><li>If you want to create a round object. please ensure the width and length are matching. Configure the corner radius to ½ - 0.01 of the width or the length. Example: You have a width of 80, set the corner radius to 39.99.</li></ol><h3>Why another box model?</h3>There are a lot of box models already available, but all I found were static,or have features or design aspects that did not fit my needs.&nbsp;I need a model flexible, that can easily adapt to any size I need - and also would be approved by my wife.Maybe I also wanted to play around with repeating auto-calculating patterns in Fusion 360, okay okay - you got me.&nbsp;I hope you enjoy the design, please leave a comment/rating if you enjoy it or share your feedback!&nbsp;<h3>Updates:</h3><ul><li>20.02.2024<ul><li>Added 20x10x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-214791" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-214791</a></li><li>Added 10x10x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-214795" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-214795</a></li><li>Added 15x10x6cm <a target="_blank" href="https://makerworld.com/en/models/103266#profileId-214801" rel="nofollow noopener">https://makerworld.com/en/models/103266#profileId-214801</a></li></ul></li><li>01.01.2024<ul><li>Added 2 new cylindric versions<ul><li>10x10x13cm <a target="_blank" href="https://makerworld.com/de/models/103266#profileId-126695" rel="nofollow noopener">https://makerworld.com/de/models/103266#profileId-126695</a></li><li>8x8x10cm <a target="_blank" href="https://makerworld.com/de/models/103266#profileId-126713" rel="nofollow noopener">https://makerworld.com/de/models/103266#profileId-126713</a></li></ul></li><li>Changed extrusion for the holes in the Fusion 360 model</li></ul></li><li>24.12.2023<ul><li>Fixed baseplate calculation in the Fusion 360 model</li></ul></li></ul><h3>More Fusion 360 Parameterized Models</h3><ul><li>Stackable Storage Bin <a target="_blank" href="https://makerworld.com/en/models/114250" rel="nofollow noopener">https://makerworld.com/en/models/114250</a></li><li>Organizer Box Diamond Edition <a target="_blank" href="https://makerworld.com/en/models/147775" rel="nofollow noopener">https://makerworld.com/en/models/147775</a></li><li>Modern Vase 1 <a target="_blank" href="https://makerworld.com/en/models/108166" rel="nofollow noopener">https://makerworld.com/en/models/108166</a></li><li>Under Desk Drawer <a target="_blank" href="https://makerworld.com/en/models/145324" rel="nofollow noopener">https://makerworld.com/en/models/145324</a></li></ul>&nbsp;&nbsp;<figure class="table"><table><tbody><tr><td style="width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/114250" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/759128/2024-03-23_519e073d57512.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/114250" rel="nofollow noopener">Stackable Storage Boxes</a></td><td style="width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/147775" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/759128/2024-03-23_fb6186fdc76a4.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/147775" rel="nofollow noopener">Boxes Diamond Edition</a></td></tr><tr><td style="width:50%;"><figure class="image"><a href="https://makerworld.com/en/models/392542" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/759128/2024-03-24_bbcd7d56b5ac1.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/392542" rel="nofollow noopener">Stackable Boxes</a></td><td style="width:50%;"> </td></tr></tbody></table></figure>

Organizer Box / Boxes

storage

Imaginarydave

<h2>Designing this took weeks of work and testing.   Your boosts are an appreciated form of thanks </h2>&nbsp;Update: I added a mirrored version of the bases and the manifold for those that want to mounth this somewhere other than on the printer or for those with a k1 max.&nbsp;Update #2: Enclosure file is up! check it out over at. <a target="_blank" href="https://makerworld.com/en/models/105490#profileId-112584" rel="nofollow noopener">https://makerworld.com/en/models/105490#profileId-112584</a><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000089050/design/2023-12-23_b2f1da0f06987.jpg">Update 3: changed print profile to use glued dowels to hold the two parts together.  I think this will sove the most common problem of getting things to line up.  &nbsp;This solved my biggest beef with day to day use of the printer……. changing filaments. &nbsp; I had a few goals.<ol><li>Be able to load filaments from the front.</li><li>Be able to leave my regularly used filaments in place</li><li>Have a place to hold filament when not in use to keep it from unrolling (you cant see it but there is holder behind each loading spot on the manifold.</li><li>be quiet - ie no rubbing.</li></ol>You&#39;re gonna need a few parts<ul><li>I used 4mm OD, 3mm ID PTFE tube to try to reduce friction. I ordered this stuff. <a target="_blank" href="https://amzn.to/46UgvDl" rel="nofollow noopener">https://amzn.to/46UgvDl</a> (bambu labs 4mm/2.5mm should work but you will definitely need to bevel entry points.)</li><li>PTFE tube connector. I used the Bambu labs one <a target="_blank" href="https://us.store.bambulab.com/products/ptfe-tube-connector" rel="nofollow noopener">https://us.store.bambulab.com/products/ptfe-tube-connector</a> you could also use one of these from amazon <a target="_blank" href="https://amzn.to/3RLyR5f" rel="nofollow noopener">https://amzn.to/3RLyR5f</a> . alternatively you could use a single piece of tubing that runs all the way from the extruder to the manifold but I wanted the option to disconnect at the machine.</li><li>8mm x300mm rod. <a target="_blank" href="https://amzn.to/3RAq5qj" rel="nofollow noopener">https://amzn.to/3RAq5qj</a> alternative link: https://amzn.to/47hFPmF</li><li>M10 push connector for PTFE tubing. I used these <a target="_blank" href="https://amzn.to/3TcCwKm" rel="nofollow noopener">https://amzn.to/3TcCwKm</a></li><li>M3 Heat set threaded inserts. I used ones from this kit. <a target="_blank" href="https://amzn.to/4a8hv9L" rel="nofollow noopener">https://amzn.to/4a8hv9L</a> but you could just buy M3 size which is the size I use the most for projects like these. <a target="_blank" href="https://amzn.to/3NksT8C" rel="nofollow noopener">https://amzn.to/3NksT8C</a></li><li>Sixteen 608-zz bearings. I use these. <a target="_blank" href="https://amzn.to/4afBenR" rel="nofollow noopener">https://amzn.to/4afBenR</a></li><li>M3 screws. I think I used mostly 10mm, but if you dont have a huge assortment of these already you should so get a variety and figure it out!</li><li>nylon washers I used ones from this kit. <a target="_blank" href="https://amzn.to/41hQDQz" rel="nofollow noopener">https://amzn.to/41hQDQz</a> 1.5mm thick. but I will also include an .stl file. you should be able to print them.</li><li>I used non slip glass top pads that I had around the house to keep it from sliding around. I am sure many different things could be used. These are what I use and it wont slide at all. <a target="_blank" href="https://amzn.to/3Njf5uU" rel="nofollow noopener">https://amzn.to/3Njf5uU</a></li></ul>How to do it…. you have to be detail oriented and if you skip any steps or have any rubbing it will cause problems.<ol><li>Print bodies as indicated in file notes.</li><li>While they are printing soak the bearings in denatured alcohol overnight, dry them out and the relube with a light oil like 3 in 1 oil or I used sewing machine oil. you need the bearing to spin like you would want them for a fidget spinner.</li><li>Heat sink the threaded inserts into the holes on the front of the bases.</li><li>using CA glue connect the bases together using the dowels.</li><li>Screw the manifold to the front</li><li>Fit TPU bearing covers over the bearings.</li><li>The fun part…… slowly fish the rods from right to left inserting washers and bearings as you go. there should be a washer on each side. this keeps bearings and rolls from rubbing the sides. The left side of each roller space should have the beveled bearing covers with the sharp edge to the left. in cross section it should look like this. The orientation of bearings on the right doesnt matter. Once they are all in make sure the TPU covers area aligned and not rubbing. they should spin freely.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000089050/design/92598ce5-25e7-4f56-b434-f6b64c34c06a.png"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000089050/design/d7e3122b-9a0d-4954-ab71-f1540a11ec56.png">  </li><li>once you have all 8 pieces through put screw the cover on to hold the rod in place - if you are printing the enclosure you can just leave them off the enclosure will keep the rods from coming out. </li><li>Assemble the manifold.<ol><li>cut 4 pieces of PTFE tube perfectly square and long enough to leave about 2-3 cm sticking out from the top of each loading point. seat them all the way.</li><li>screw the PTFE M10 connector into the manifold.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000089050/design/32e3f901-4987-49f4-bd7e-86cf8341156a.png"></li></ol></li><li>Place a coupler on the end of the PTFE tube coming out of the machine and attach PTFE tubing from that point, through the holders to the manifold.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000089050/design/24be0f7d-c06b-4884-9157-b27d22c1ccd5.jpg"></li><li>PRINT AWAY  </li></ol>&nbsp;&nbsp;EDIT:&nbsp;DrHO1337 over at printables has some code on his model (found here <a target="_blank" href="https://www.printables.com/model/621741-bambu-lab-manual-material-system" rel="nofollow noopener">https://www.printables.com/model/621741-bambu-lab-manual-material-system</a> ) that might make material changes easier for people who want to do simple prints with multiple colors. This model was initially just made for use with single color prints. give it a try. I havent used it. and give the guy a thumbs up over there.&nbsp;here are his instructions:In order to use the slicer correctly, like an AMS, you have to change the filamentchange gcode in the printer settings. The corresponding g-code is in &#34;noAMS.txt&#34;.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000089050/design/704c2202-1f8e-45e8-8cc8-147f0697874d.webp">  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;