NEKOKUMA CREATIONS

petea4

fallout vault boy clock with dots

clock

JustBe 3D Printing

I actually do print all of the models I upload and that takes a time and filament.&nbsp;Visit my Patreon (in bio or <a target="_blank" href="http://patreon.com/JustBe3D" rel="nofollow noopener">http://patreon.com/JustBe3D</a>) if you are interested in *exclusive* FREE and members only models or a commercial license to sell your physical prints of my models.&nbsp;Can be rescaled just remember not to change the Z axis.I print with a variable layer hight but just uploaded the standard 0.16 base with 0.08 layer heights.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA Overture Space Gray Transmission Distance: 1.4 PLA Overture White Transmission Distance: 4 PLA Overture Blue Transmission Distance: 1.2 PLA Overture White Transmission Distance: 4Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Space Gray At layer #17 (1.44mm) swap to White At layer #21 (1.76mm) swap to Blue At layer #28 (2.32mm) swap to White for the rest.

Sonic the Hedgehog

Hueforge

javiermtv

<h4>Resumen</h4>Réplica de los mangos de los sables de luz de hoja blanca de Ahsoka Tano de Rebels y The Mandalorian.<h2>Diseño</h2>Este archivo se ha dividido para minimizar la cantidad de soportes y permitir imprimirlo en diferentes colores antes del montaje (para minimizar el trabajo de acabado). Las imágenes incluidas no han sido lijadas ni pintadas y prácticamente simplemente están impresas, limpiadas y ensambladas.<h2>Impresión en color</h2>Si desea imprimir esto en colores separados (en lugar de pintarlo usted mismo), necesitará (con las marcas que usé entre paréntesis)<ul><li>Gris Claro (Filamentum Extrafil Electric Grey PLA)</li><li>Gris Oscuro (Filamentum Extrafil PLA Gris Hierro)</li><li>Plata (Polyalchemy Elixir Lucid Pearl PLA, no es la mejor opción pero es la que tenía)</li><li>Bronce (Fiberlogy FiberSilk Metallic Bronze, se ve opaco en el carrete pero se imprime brillante)</li><li>Negro (carrete viejo de tinta rígida, pero ya no existe)</li></ul><h2>Guía de impresión</h2>Todas las piezas han sido prealineadas para la impresión.Probablemente necesitará habilitar el borde en varias de estas piezas, especialmente en las piezas más grandes del mango que tienen áreas de contacto muy pequeñas.Si bien no se requieren soportes en la mayoría de las piezas, hay algunas piezas más pequeñas que sí requieren soportes y 4 piezas (2 por mango) que necesitan soportes de puente debido a los puentes largos (estos se usan como superficies de pegamento, por lo que mientras los puentes no No son visibles (es necesario que sean relativamente planos para crear una buena superficie para alinear las cosas). Donde se requieren soportes se indica en el nombre del archivo.Nota: Los soportes de puente deben habilitarse manualmente en algunas cortadoras (como la cortadora Prusa)Imprimí esto en varios PLA en alturas de capa de 0,1 a 0,2 mm (dependiendo de la pieza) con la configuración de relleno predeterminada. Aumenté el número de perímetros de las piezas grandes del mango para darles algo de resistencia adicional.<h2>Convenciones de nomenclatura de archivos</h2>El nombre del archivo contiene información sobre:<ol><li>Si la pieza es para el mango grande o pequeño</li><li>un número de pieza</li><li>El color a imprimir (desde gris claro, gris oscuro, plateado, bronce, negro)</li><li>Si se requieren soportes y/o soportes de puente</li><li>El nombre de la parte</li></ol><h2>Montaje</h2>Se incluye un documento PDF con instrucciones básicas de montaje.Además de las piezas impresas, necesitarás dos anillos en D. Utilicé anillos en D de 30x20 mm con una sección transversal de 3 mm; cualquier tamaño debería funcionar siempre que la sección transversal sea la misma. Amazon los vende por bolsa llena por poco dinero.Algunas de las superficies del pegamento son bastante pequeñas, lo cual es malo, pero es demasiado tarde para cambiarlas, por lo que debes utilizar superpegamento con un aplicador estrecho o con brocha. Tenga cuidado al alinear las partes del mango principal o terminará con una costura fea; otras partes tienden a ocultar problemas de alineación debido a la forma en que se ensamblan los mangos. Description Summary Replica of the handles of Ahsoka Tano&#39;s white-bladed lightsabers from Rebels and The Mandalorian.Design This file has been split to minimize the number of supports and allow it to be printed in different colors before assembly (to minimize finishing work). The images included have not been sanded or painted and are practically just printed, cleaned and assembled.Color printing If you want to print this in separate colors (rather than painting it yourself), you will need (with the markings I used in parentheses)Light Gray (Filamentum Extrafil Electric Gray PLA) Dark Gray (Filamentum Extrafil PLA Iron Gray) Silver (Polyalchemy Elixir Lucid Pearl PLA, not the best option but it&#39;s the one I had) Bronze (Fiberlogy FiberSilk Metallic Bronze, looks dull on the reel but prints bright) Black (old rigid ink spool, but no longer exists) Printing guide All parts have been pre-aligned for printing.You will probably need to enable the edge on several of these pieces, especially on the larger handle pieces that have very small contact areas.While no supports are required on most parts, there are a few smaller parts that do require supports and 4 pieces (2 per handle) that need bridge supports due to the long bridges (these are used as glue surfaces, for example). which while the bridges are not visible (they need to be relatively flat to create a good surface to line things up on). Where supports are required is indicated in the file name.Note: Bridge supports must be enabled manually on some slicers (such as Prusa slicer)I printed this in various PLA at 0.1-0.2mm layer heights (depending on the part) with the default infill settings. I increased the number of perimeters on the large handle pieces to give them some extra strength.File Naming Conventions The file name contains information about:If the piece is for the large or small handle a part number The color to be printed (from light gray, dark gray, silver, bronze, black) If brackets and/or bridge supports are required The name of the part Assembly A PDF document with basic assembly instructions is included.In addition to the printed parts, you will need two D-rings. I used 30x20mm D-rings with a 3mm cross section; any size should work as long as the cross section is the same. Amazon sells them by the bag full for cheap.Some of the glue surfaces are quite small, which is bad, but it&#39;s too late to change them, so use super glue with a narrow applicator or brush. Be careful when lining up the main handle parts or you&#39;ll end up with an ugly seam; Other parts tend to hide alignment issues due to the way the handles are assembled.

Ahsoka Tano LightSabers

Star Wars

darvil66

HARRY POTTER SLYTHERIN black bookmark Marcador libros HARRY POTTER SLYTHERIN negro

HARRY POTTER SLYTHERIN black  bookmark Marcador libros HARRY POTTER SLYTHERIN negro

Bookmarks

Kris95

Hi! today we have a new model of a buckbeak from harry potter! :) It is designed so it can be printed multicolour even if you dont have multicolour printer. You just have to set up automatic change of colours in your slicer and then print colour one by one :)

Harry potter hipogriff buckbeak keychain magnet

Keychains

PhaseworksCA

A spooky halloween pikachu dressed up as a ghost.A Spookychu?a Pikaboo? I dont even know. &nbsp;Printed face down on a textured build plate to achieve a nice finish. The parts are named so its easier to select the appropriate colours. &nbsp;For mine I used all Bambu Matte Filaments. &nbsp;Happy printing!

Spookychu. Pikaboo? A ghostly decorative pikachu

Neko

nicodeimos

Ring hole: 4.8mm.Model size: 46mm x 30mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Iconix and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

clock

Hueforge

Star Wars

Bookmarks

Keychains

Neko

Things to make