OldSpice3d

Led lightbox of the famous logo from the movie Ghostbusters !&nbsp;With fluorescent filament, when you shut off the led light it will continue to glow in the dark !&nbsp;Perfect as Halloween decoration :D &nbsp;&nbsp;

Ghostbusters logo led lightbox

Holidays

alstonr96

This model is print in place. You can print it as is and can be pulled apart when it is done printing. Be careful pulling it apart so you don't stretch it out. &nbsp;PLEASE NOTE: Bambu Studio will give a warning about floating cantilever. You can ignore that, it will print fine.&nbsp;I printed mine in PLA however for longevity, it may be better to use something like PETG.&nbsp;There are two build plates in the print profile. One is single colored and the other colors in the eyes and nose. &nbsp;Good luck printing!

Easter Bunny Slinky Toy - Print in Place

Toys

Modelicious Creations

Plant or seeling label. Intentionally left blank. You can either use Bambu Studio to add a text or print them directly and label them afterwards.&nbsp;The height is about 110 cm and the width is 18 mm.

Plant or Seedling Label for Your Own Text

Garden

Reuter_Corp.

Wall Art - Flowers in pot 5mm thick&nbsp;

Wall Art - Flowers in pot

Decor

TripleGWorkshop

<h4>Modular Design.</h4><figure class="image image_resized" style="width:78.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/119940/2023-10-25_qmbowfau371w.jpg"></figure><h4>Room for fuzzy skins.</h4><figure class="image image_resized" style="width:77.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/119940/2023-10-25_oml34vcgadbg.jpg"></figure><h4>Drain Reservoir in back.</h4><figure class="image image_resized" style="width:77.18%;"><img src="https://makerworld.bblmw.com/makerworld/draft/119940/2023-10-25_z3eyiggo8vua.jpg"></figure><h4>Enjoy!</h4><figure class="image image_resized" style="width:82.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/119940/2023-10-25_59ql00txs3ts.jpg"></figure>No time? Here's a VASE MODE version that prints fast! <a href="https://www.printables.com/model/464081-hex-tiered-planter-vase-mode" rel="nofollow">https://www.printables.com/model/464081-hex-tiered-planter-vase-mode</a><figure class="image image_resized" style="width:66%;"><img src="https://makerworld.bblmw.com/makerworld/draft/119940/2023-10-25_qlkz47q5neoi.jpg"></figure>

Pop-Out Hex Herb Garden w/Drainage

Home

Acheituno

This is a manual filament spool winder inspired by the bmsluite model, originally made for splicing and winding multiple spools of leftover filament onto a single roll.&nbsp;From there it has been modified to achieve a simple and effective fully manual filament spool winder, which does not need any metal parts or other parts and which will help you rewind your filaments easily.&nbsp;Its main use is to change the filament from one spool to another, for example to recharge filament in Bambu Lab spools for greater and better use of the AMS.&nbsp;It has also been redesigned and separated into the necessary parts with connectors so you can print it on your Bambu A, X or P series&nbsp;I have done test with three complete ones, all made with Bambu Pla Basic, 25% filling should be enough, If you have issues you can increase the filling of the parts that are subjet to greater stress like hand crank (recomended 65% filling) or use PETG/ABS/ASA. In addition you can also vary the printing position to give greater strength. A drop of lubricant on the gears and hand crank will help ensure smoother, longer-lasting operation without issues&nbsp;Enjoy it!!

Manual filament spool winder

Useful

SnapPrint3D_SuperCrazyPrints

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready! <a target="_blank" href="https://www.supercrazyprints.com/" rel="nofollow noopener">https://www.supercrazyprints.com/</a>&nbsp;Check out my other models: <a target="_blank" href="https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models</a>

Pokemon-Pikachu(NO SUPPORT)

Tridense

<h4>This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! <a href="https://www.buymeacoffee.com/Tridense" rel="nofollow">https://www.buymeacoffee.com/Tridense</a> </h4>Clip it on to your doors sidepocket or onto the pocket on the back of your seat!Volume of 2 liters (67.5fl.oz.)Insert a small plastic bag to easily empty the canPrint the flipper lid 100% infill, important for balancing the pivotAll the parts are pre-oriented for printability, I used tree supports on all the parts and kept the treshold angle at 29 degrees.<figure class="image image_resized" style="width:50%;"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/66866/2023-09-22_kt765tldam9a.jpg"></figure><figure class="image image_resized" style="width:50%;"></figure>&nbsp;<h4>Changelog:</h4>2023.09.12: Added a little curve on the hook to make it a little bit more secure (Bin v2)

Car Trash Can

Tommy Gun

Super usefull sign for conversions !!! the wife love em to death, now the famillly !!!&nbsp;Enjoy &nbsp;Again an really easy enjoyable practical print !