This printed perfectly and quickly in Bambu PLA Basic Jade White. This model allows me to use “Mini Waterproof RGB LED Tea Lights with Remote Control” (Bambu Lab KC020, or generic equivalent) in place of “LED Flame Tea Light Candle” (BBL KC008/17/18 depending on color temperature, or generic equivalent) in models that call for the latter. Why is that so good? The submersible lights are fairly inexpensive, (they can be had in bulk for about USD$2 each) and are remote-controllable and dimmable, which is much nicer than the manual “on-off” tea lights. This is especially good if the light is somewhat buried inside a model or up high on a shelf and you just want to turn it on or off. Since these little lights are smaller than the flame tea lights, they tend to rattle around a bit in models designed for them This model provides a snug fit for my lights.

This is not an egg slicer. It's an egg smoosher. The edges of the "blades" printed with what looks like nice, sharp edges in PETG, but they don't cut hard-boiled eggs at all. I gave 5 stars since I'm supposed to be rating the print profile, which is fine. The model is pretty and I had high hopes for it, but as a design it rates one star.

These are a good idea and clever design. I tried printing them on 4 different printers using 3 different brands of TPU, 95A and 98A, and in every case the tips were friable and ended up falling apart.

This printed without any problems and fits perfectly. I retrieved the packaging tray from the trash so it was pretty economical filament.

Printed in white and placed among actual sea urchin tests, it looks very convincing, but is much less fragile than an actual test.

This is the only workable solution I’ve found for a filament switch holder for A1 mini with AMS Lite. It prints well and looks nice.

Prints very nicely. Looks great. Leaks.

This is a creative and elegant solution to a very specific design issue. It printed with no issues. It wa fun to try to figure out where everything goes. I would have got nowhere with this without the somewhat cryptic instructions, but it still took a great deal of trial and error (for example, with the battery terminals). I eventually got everything squared away except for the white plastic shaft from the reduction gear set. Since there’s a very specific spot for everything else, I think my tossing it in with the screws was likely not correct

These are a great idea, but I was a bit disappointed to find that they don’t allow repacking the A1 mini in its original box with the original packing materials.

worked perfectly. printed quickly. fits well. one of these days I need to get some TPU that is t black and give a try

But… that’s impossible!

Orinted great, works great

It’s cute. It’s mini. It printed without problems.

Printed with no difficulty. it’s exactly as described.

This is my first-ever 3-D print. It worked great on a A1 Mini Combo. Tge print-in-place hinge is great I added my company’s logo and contact info (obscured with purge blobs). Now I just have to wait for magnets to arrive and to print a second one in a reversed color scheme for my remaining 3 pens!