apexproto

bri0nac

I could not find a spacer plate for the Google Nest Hello Gen 2 Wired Door Cam and instead I only found options for the battery edition. So I picked the best looking one I could find to use a template and created three different plates to get the angle I wanted. The three spacer plate options included:<ul><li>Flat Rised Spacer</li><li>10 Degrees to either the left or right</li><li>10 Degrees to the right and 1 degree down </li></ul>

Google Nest Gen 2 Wired Doorbell Spacers (Flat & Angled)

Google Nest

markyzek

Zero Clearance insert for DeWalt DWS780 Miter saw. &nbsp;I suggest using 0.4 nozzle with 0.2 layer height and 80-90% infill (60% should still work, but not tested). If you have smaller printer like me (X1C), you need to cut the insert in half and add some plug connectors (inlucded in *.3mf file).After that, only thing you need to do is to cut it while screwed in your miter saw. Don't forget to square your blade before the cut, then USE SAFETY GLASSES and shop Vac. Enjoy

Google Nest

werksttt

WallArt