apatish

3D servis

Tool for measuring hole diameters from 10mm to 25mm. Edit: added part for measuring hole diameters from 3mm to 25mm

Measure tool - hole diameter 10-25mm

engineering

ysk1025

If you like this model, I would be happy if you could buy me a coffee.<a target="_blank" href="https://www.paypal.com/paypalme/ysk1025" rel="nofollow noopener">https://www.paypal.com/paypalme/ysk1025</a>&nbsp;Features:<ul><li>Simpler appearance compared to Bambu Lab models</li><li>Slightly thinner bezel</li><li>No support required</li></ul>Caution:<ul><li>When printing Lithophane, please add a "Lithophane tab"</li><li>Without the tab, it cannot be fixed to the frame</li><li>Also, an insert nut is required for the frame.</li><li>If your insert nuts don't fit, you can download the STEP file and modify it.</li></ul>Necessary items:<ul><li>Bambu Backlight Board 1pc</li><li>Insert nut (Recommended: M3×3×4.2) 4pcs</li><li>Hexagon Socket Button Head Screw M3×12mm 4pcs</li></ul>Types and colors of filaments to use:<ul><li>All okay with PLA</li><li>Lithophane frame: Any color, dark opaque colors recommended</li><li>Diffusing plate spacer: Bambu Lab PLA Basic Jade White</li><li>Diffusing plate: Bambu Lab PLA Basic Jade White</li><li>Back frame & Stand: Any color</li></ul>Lithophane Printing:<ul><li>For creating STL files, please refer to Bambu Lab Wiki's CMYK Lithophane Printing Guide. <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions" rel="nofollow noopener">https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions</a></li><li>Load the created Lithophane STL file and "Lithophane tab" as multiple parts into Bambu Studio. <img src="https://makerworld.bblmw.com/makerworld/draft/309499/2023-11-15_fcb84cedca9de.png"></li><li>If the Lithophane tab is misaligned with the Lithophane itself when loaded, please move the tab so that it fits perfectly around the Lithophane. <img src="https://makerworld.bblmw.com/makerworld/draft/309499/2023-11-15_909146e40a458.png"></li><li>In my setup, aligning the tab coordinates to X:36.9, Y:27.9 worked well.</li><li>I have uploaded a file that fixed the above position issue: Lithophane tab v3</li><li>Please print the tab in white color.</li></ul>

Stacked Lithophane frame

lithophane

UniDuni3d

Cute Elephant for decoration.Model have 19,5cm height, can be scaled up or down.Needs support only on its belly.Makes a cute decoration!&nbsp;NEEDS SUPPORT ON ITS BELLY.

Cute Elephant for decoration

home decoration

T_WITHE

Welcome! I am pleased to share with you the Gardena quick connector set that I designed in various sizes to perfectly meet different connection needs. The set is available with different threads and sizes:<ul><li>External and internal threads</li><li>Sizes: 3/8&#34;, 1/2&#34;, 3/4&#34;, 1&#34; (M18)</li><li>Traditional BSP thread</li></ul>Material Choice For the best results and long lifespan, I recommend the following materials for printing: PETG, ASA, ABS. PLA can also be used, but I strongly recommend the former materials. Sealing Rings Sealing rings can be printed from TPU material as it is flexible and waterproof. However, for the best results, I recommend using factory sealing rings, especially O-rings, to ensure maximum water tightness and long-term reliability.It&#39;s important to note that high pressure can cause leakage or other issues, so I do not recommend using the connector at high pressure! I experienced slight leakage at 6 bar, so please don&#39;t leave negative feedback because of this. Thank you! For supports, if possible, use support material, or use PETG-PLA or PLA-PETG interface layer mode. Thank you for choosing this 3D printable Gardena quick connector set! I hope you find it useful. If you have any questions, feel free to reach out to me! If you have any suggestions or requests, please contact me. This is a revised version of my original model with some additional sizes: <a target="_blank" href="https://www.thingiverse.com/thing:4904221" rel="nofollow noopener">https://www.thingiverse.com/thing:4904221</a>

Gardena quick connector set

outdoor

3D Print Masters Hub

<h2>Spacesaver Desktop Organizer with Drawer</h2>-Great for organizing miscellaneous pens, pencils, markers, paperclips and more!-Make sure to print the cabinet and the drawer.-No print support needed.-Scale down as needed.-Please like and subscribe! More to come!-See bio for more exclusive print project ideas.🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥

Spacesaver Desktop Organizer with Drawer

A1 mini

AU3D

This holder is elegantly designed for a deburring tool with a handle diameter of up to 14mm, complete with 10 extra slots for a set of spare blades. For deburring tools with a bigger handle, see my other <a target="_blank" href="https://makerworld.com/en/models/136246" rel="nofollow noopener">deburring tool holder</a> which allows up to 19mm. As with my other designs, I&#39;ve incorporated custom-designed Skadis hooks with minimal tolerances, ensuring a snug and secure fit. I deliberately opted for two hooks because this approach is the simplest way to guarantee a stable, non-moving holder.<h3>Other Sizes</h3>I offer holders for various deburring tool sizes:<ul><li><a target="_blank" href="https://makerworld.com/en/models/456420" rel="nofollow noopener">14mm (usually hex-handle)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/136246" rel="nofollow noopener">19mm (usually round handle)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/501166" rel="nofollow noopener">22mm (usually round, profile handle)</a></li></ul><h3>Lock Plug</h3>For a more secure installation I recommend using the Skadis <a target="_blank" href="https://makerworld.com/en/models/92747" rel="nofollow noopener">Lock Plug</a> (10mm flat should be a good starting point) to prevent the holder from sliding out of the pegboard holes when you retrieve your figure and to help align the holder horizontally.<h3>Skadis Collection</h3>I am constantly developing more IKEA Skadis attachments. Check out my <a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/188108" rel="nofollow noopener">IKEA Skadis Collection here</a>.

Deburring Tool Holder for IKEA Skadis (Hex Grip)

skadis

jetpad

Here’s a model that allows you to create your own custom filament colors. This process involves printing a model that itself functions as 3D printer filament. You choose the colors to use and they are blended during the printing process to form a single, uniform new color filament. Once printed, this filament can be used just like standard filament to add custom colors to your 3D printing projects!&nbsp;Note: This color mixer is designed to produce unique, uniform color filaments, rather than creating filaments with the changing colors and multicolor patterns typical of dual or dichromatic filaments.&nbsp;How It Works:&nbsp;To create your new color, choose from two to four colors to fill the designated slots. Depending on your choice and combination, you can achieve various color effects:<ul><li>Two-Color Blend: Achieve a balanced mix by using two colors in a 1:1 ratio, or create a dominant/subtle effect with a 3:1 ratio. For best results, alternate the colors in the four slots.</li><li>Three-Colors: Mix three colors using a 1:1:2 ratio for dynamic and surprising outcomes. Avoid placing the same color in adjacent slots to maximize the mixing effect.</li><li>Four-Colors: Experiment with four different colors. This is ideal for specific needs, though it may result in a darker, more muted tone.</li></ul><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-13_01dff3d232a5b8.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-13_16f8f1af672bf.png"></figure></td></tr></tbody></table></figure>Color Mixing Tips:<ul><li>Use only one slot for darker shades like Navy Blue or Black to prevent overpowering other colors.</li><li>Light colors, such as light pink or white, are best mixed in a 3:1 ratio with darker filaments to enhance visibility.</li><li>For equally dominant colors, alternate them in the slots for a more harmonious blend.</li></ul>Printing Guidelines:<ul><li>The resulting filament will appear as if the colors are still separate, but true blending occurs when the filament is re-fed into the printer.</li><li>To avoid adhesion issues, especially with materials like PLA and PETG, consider using a Bambu Textured PEI Plate. Dedicate one side of the plate to each type of plastic.</li><li>Regularly clean your printer bed to ensure flawless adhesion and pristine print quality.</li></ul>Explore Our Creations: See the magic for yourself with <a target="_blank" href="https://makerworld.com/en/models/136663#profileId-149962" rel="nofollow noopener">LARRY the Tiny Dino</a>, our featured model demonstrating the vibrant possibilities of our custom-mixed filaments using standard Bambu Lab Matte PLA colors.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-11_bc7db0e6c6235.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-11_10c21f72d1c86.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-11_5f5ffe335267e8.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-11_4431a7548b5e88.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-11_9f3a50f4ff7c88.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460079/design/2024-05-11_8338251e448918.png"></figure></td></tr></tbody></table></figure>Happy Printing!&nbsp;<h4>Check out these other custom filaments you can make: <a target="_blank" href="https://makerworld.com/en/models/438259" rel="nofollow noopener">  Tricolor</a>   <a target="_blank" href="https://makerworld.com/en/models/446943" rel="nofollow noopener">Quad-Color</a>   <a target="_blank" href="https://makerworld.com/en/models/477652" rel="nofollow noopener">Stratified</a></h4>

Filament Color Mixer

follow

ryanjlissak

test for tree supports

tests

Josh-3D

Check out the other two games in the series<a target="_blank" href="https://makerworld.com/en/models/140755#profileId-153348" rel="nofollow noopener">Checkers</a><a target="_blank" href="https://makerworld.com/en/models/134530#profileId-145997" rel="nofollow noopener">Chess</a>&nbsp;[Update] After getting some feedback, I adjusted the print profile, so the color change isn&#39;t discharged into the infill. I also increased the bottom shell layers. Since the main color scheme of this is white/black/green, it makes sense to reinforce those settings to avoid color bleed. Also added an A1 Mini plate for the Mini users!&nbsp;[Update 2!] Shout out to <a target="_blank" href="https://makerworld.com/en/u/840057458" rel="nofollow noopener">Wcad00 </a>for the added clip![Update 3!] Shout out to <a target="_blank" href="https://makerworld.com/en/u/982974221" rel="nofollow noopener">SoftWareCrash </a>and <a target="_blank" href="https://makerworld.com/en/u/425227684" rel="nofollow noopener">Adminstrator</a> for their contributions. The “Pocket” version, a 50% scaled version, and for a set of Xs and Os, with the Xs cut to fit inside the Os.&nbsp;A Travel TicTacToe game, for those long spans stuck at sea, where you don&#39;t want to risk using a pencil on the side of your life raft! Or uh, you know, any other occasion too, like road trips down the coast with friends, or spending family time playing games!&nbsp;Player piece quantity is setup so that X goes first!&nbsp;The clearance is tight. The X and Os should fit fine, but if your printer is sloppy, it might be a tight fit.&nbsp;&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.&nbsp;&nbsp;

TicTacToe - Travel Edition

kids

Kamteix

With the anticipation of the Dune sequel, I thought it'd be a fantastic opportunity to craft a unique gift for my friends.This creation is inspired by the House Atreides Ornithopter, as depicted in Denis Villeneuve's recent film adaptation.Available in 256x256 to 120x120 (check details for 120x120) printing plate sizes.&nbsp;Assembly Guide avalaible further down<h3>Features:</h3>The model can be displayed in either flight or landed modes.The parts are designed to fit together with tight fit, eliminating the need for glue. However, given I tunned the fitting with the specific calibration of printer, minor adjustments with a dab of glue might be necessary for others.<ol><li>Foldable Wings: Transition the wings between flight or landed positions. Be mindful that when fully folded, the weight of the wings could tip the model backward.</li><li>Landed configuration: This is the default configuration in the kit so you can display the model without anything else.</li></ol><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://media.printables.com/media/prints/783683/rich_content/f045ae31-46f9-46b8-b5c1-46b0dd05fe5a/screenshot-2024-03-05-160105.png#%7B%22uuid%22%3A%22c21f633d-eca5-4e2e-8576-fc394b5ff88c%22%2C%22w%22%3A1118%2C%22h%22%3A733%7D"></figure><ol><li>Flight configuration: For those who favor a flight display, you can swap out the ramp and front landing gear with the upgrade kit provided in the downloadable file. I recommend downloading the Stand I created for displaying the model as if it's flying, which you can find below.</li></ol><figure class="image image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/783683/rich_content/e5ddc8bc-242a-474a-937a-bc8c30309b75/screenshot-2024-03-05-160129.png#%7B%22uuid%22%3A%22193f17cc-9449-4f4c-892c-06cb6c8f1208%22%2C%22w%22%3A1145%2C%22h%22%3A640%7D"></figure><h3>Download the Stand for this kit <a target="_blank" href="https://makerworld.com/en/models/223117#profileId-241123" rel="nofollow noopener">here</a></h3><figure class="image image_resized" style="width:71.7%;"><a href="https://makerworld.com/en/models/223117#profileId-241123" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-03-03_e2feda12f81c6.jpg"></a></figure><h3>Recommended Printing Settings:</h3>For optimal assembly, I strongly suggest the following settings, fine-tuned for this kit's precision:<ul><li>First layer height : 0.2 mm</li><li>Layer height : 0.08 mm</li><li>Wall loops : 4</li><li>Infill density : 100%</li></ul><h3>Kit options:</h3>I designed the kit with printing bed size in mind so those with small printing bed won't have to scale it down :<h4>Standard Kit with Full-Length Wings:</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_jzh98rsxd7yk.png"></figure>Ideal for a 256x256 printing plate, this version boasts the ornithopter's impressive wingspan.<blockquote>For X and P series of Bambulap Printer you need for this kit to adjust the printer settings as indicated <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">in the official Bambulab Wiki</a><figure class="image image_resized" style="width:58.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_eac8eea287d96.jpg"></figure></blockquote><h4>Compact Kit with Short Wings:</h4>For those preferring a smaller footprint, this edition offers abbreviated wings, suitable for a 256x256 printing plate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_ubbm0hxoi9as.png"></figure><h4>Small bed Kit:</h4>An adjusted option without wings for printers with a 180x180 printing plate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_faebmzhm7e29.png"></figure><h4>Separate Wing Kits:</h4>Choose either the full-scale or short wings to pair with the Miniature Kit for custom wing dimensions.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_emccbnkolm6l.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_zvvyu8oxfmcw.png"></figure><h4>Individual Components:</h4>Every part is also available separately for those looking to print without the kit aspect or specific replacements.&nbsp;<h4>120x120 printing beds</h4>for 120x120 you will need to print indivudual parts without the kit version, you will need to download specificaly those parts instead of those in the general indivudual parts component. Those parts fit diagonally in your plate<ul><li>120x120_Airframe_main</li><li>120x120_Horizontal_tail</li><li>120x120_wings_left</li><li>120x120_wings_right</li></ul>&nbsp;(yes I got a bit carried away by the fun of designing the kit versions :p)&nbsp;<h3>Assembly Guide:</h3>Follow the instructions below to build yours, or don't and enjoy the 3D puzzle.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_80f0f7ba085cc.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_643d4851aa544.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-03-04_1da6163b84e0e.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_b42cc82d0dad3.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_e9d83f36c793d.jpg"></figure>I hope you find joy in assembling this model. I'd be thrilled to see your completed builds and hear your valuable feedback.

Dune - House Atreides Ornithopter - Kit

models

ATripleD

Shopping cart coin design as 5 NIS!With a coin holder that be attached to keychain and supports shopping carts with side coin load.&nbsp;<h4>Instructions </h4>PETG is the most suitable material for this model, but PLA would also work.&nbsp;enjoy!