andreaskriegel

ale_elli

I redesigned the original Jerooney's version of the tumb stick raisers because, in my experience, they are a little bit weak and tends to break. I enlarged the arms that embrace the original stick to give more stiffness to the assembly. for the same reason, I suggest to print the components in PLA-CF. If you have problems with the threads, you can try to print the sticks upside down.Cover the sticks with rubber hoods to have more grip.

Playstation 5 Dualsense thumb stick raiser

Tommy Sculp3D

Ein selbstgedrucktes iPhone 14 Case bietet eine einzigartige Möglichkeit, dein Smartphone individuell zu schützen und zu gestalten. Diese Schutzhülle, die speziell für das iPhone 14 entworfen ist, vereint Funktionalität und Design.&nbsp;----------&nbsp;A self-printed iPhone 14 case offers a unique opportunity to protect and design your smartphone individually. This protective case, designed specifically for the iPhone 14, combines functionality and design.

IPhone 14 Case

Handy

irondog3D

Design: This is the second version of my standard Raspberry Pi case. I have found this design to prove particulary effective and as such would like to share it with others in the RPi community. It is designed for the model 4B but it may fit other versions. I only have 4B's so cannot confirm this. The design maintains a minimalist aesthetic, avoiding unnecessary embellishments or complex structures. This ensures that the case remains functional, easy to print, and cost-effective. RPi's like to run hot so the case includes a series of vents on the top and bottom in the form of a wave pattern. These openings allow for passive airflow to dissipate heat generated by the Raspberry Pi's components during operation.&nbsp;Assembly: The case features a two-piece enclosure that securely fits around the Raspberry Pi 4B. The top and bottom pieces are designed to snap together, providing easy assembly and disassembly. Assembly requires 4 x M2.5x13mm screws (shorter may also work). The upper part of the case is designed to self tap so nuts are not required.&nbsp;Usage: This case is designed for software based projects such as a simple PC or Kodi box. GPIO ports are not accessible but all other connections are open and easily accessible. An important part of this design was to ensure the SD card can be easily removed and replaced without having to open the case.&nbsp;Print: The 3MF files provide the top and bottom prints on separate plates to make it easy to choose separate colours. If you just want to print as a single colour then you can place both models onto one plate for quick and easy printing.

Raspberry Pi 4B Case V2

Raspberry Pi

BrandedAbstract3D

I just wanted to drop you a quick note of thanks and share a link to the creator that inspired this phone holder. The incredible <a target="_blank" href="https://makerworld.com/en/@StepanK" rel="nofollow noopener">@StepanK</a> here on Maker World. Your original creation sparked some creativity on my end, and I ended up doing a simple remix of it. Go checkout all of his new Maker World creations. His work has been a fantastic source of inspiration, and I&#39;m happy to honour that by sharing what I&#39;ve come up with. Thanks again for sharing your creativity with the world.&nbsp;Wanna Sell This and Other Items? Check out my Patreon for a commercial license. <a href="patreon.com/BrandedAbstract3D" rel="nofollow">patreon.com/BrandedAbstract3D</a>&nbsp;Phone holder designed to resemble a Recaro Racing Seat, unique and functional, great for any space. It&#39;s a top conversation starter for anyone who loves cars. Always adds a touch of car scene to your surroundings.&nbsp;To complete the phone holder you&#39;ll need:<ul><li>1 x Seat (printable)</li><li>1 x Roll Cage (printable)</li><li>2 x Support Struts (printable)</li><li>8 x M3 Screws</li></ul><h3>Print Settings</h3>I usually go for the BBL “Standard” 0.20mm settings. It seems to strike the right balance between quality and speed compared to other profiles. I&#39;m a fan of the consistent layer height of 0.2mm, but variable layer height is good too! Feel free to play around with the print quality settings to see what works best for you. I&#39;ve had success with BBL Filaments and various other brands, but for Silk PLA, slowing down the outer walls to around 50mm/s seems best.&nbsp;<ul><li>Seat: Use a 10% grid infill—it&#39;s sturdy enough to hold a phone. I used to two bottom shell layers; once the support struts are fitted, the seat base doesn’t touch the tabletop. And, I set the seam position to “back”. I’ve found it looks more intentional, and you kind of forget it’s there!</li><li>Roll Cage: A 0% infill will save print time and is still pretty strong, even for two perimeters.</li><li>Support Struts: Use a 15% grid infill. This part is mostly top and bottom shell layers, but a good scaffold is needed for the top layers to build on. Important: set the top surface to 50mm/s for a smoother finish! You could turn on ironing, but I prefer seeing some industrial layer lines.</li></ul><h3>Assembly</h3>Assembly is a breeze! You&#39;ll get it from just looking at the photos. Insert the M3 screws into the holes and tighten all parts together. Avoid screws longer than 10mm to prevent them from sticking out of the holes in the roll cage. It won’t break anything, but you’ll see the backs of them protruding.&nbsp;Happy Printing!&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/ba3d" rel="nofollow noopener">Buy Me A Coffee</a> ☕(Appreciated but absolutely not required)

Recaro Racing Seat Phone Holder

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

Schuhe

cpiendl

I once tried to make a clock face for the clock component kit 011 (including hands and wall mount) maybe someone will enjoy reprinting it.&nbsp;I used the radio clock movement from Amazon, which is dimensionally identical to the Kit 011 from Bambulab.https://www.amazon.de/dp/B00TOBU9B6?ref=ppx_yo2ov_dt_b_product_details&amp;th=1&nbsp;If you want to use the dial as an STL file for printing, you must make sure that you enlarge the hole in the middle to 8mm in the slicer, as this has changed accordingly due to the scaling. For everyone who uses the 3MF…… it can probably be scaled without any problems 😉&nbsp;I added a new print profile with a set of new clock hands. The second hand is very difficult to print. I recommend using the print profile for this.&nbsp;If anyone needs different sizes for the hands, please feel free to contact me. I will then adjust them accordingly and set them up as a new profile. (other clock movements have different diameters of the hand holder)&nbsp;&nbsp;&nbsp;&nbsp;Ich habe mich mal daran versucht eine Ziffernblatt für das Uhrenkomponenten-Kit 011 zu basteln (incl. Zeiger und Wandhalterung) evtl. findet jemand Freude daran es nachzudrucken.&nbsp;ich hab dazu das Funk-Uhrwerk von Amazon verwendet, welchens maßlich identisch zu dem Kit 011 von Bambulab ist.<a target="_blank" href="https://www.amazon.de/dp/B00TOBU9B6?ref=ppx_yo2ov_dt_b_product_details&amp;th=1" rel="nofollow noopener">https://www.amazon.de/dp/B00TOBU9B6?ref=ppx_yo2ov_dt_b_product_details&amp;th=1</a>&nbsp;Wer das Ziffernblatt als STL datei für den Druck verwenden möchte muss beachten, dass er im Slicer das Loch in der mitte auf 8mm vergrößert, da sich dieses durch die Scalierung entsprechend verändert hat. Für alle die die 3MF verwenden…… da kann vermutlich problemlos scaliert werden 😉&nbsp;Ich habe ein neues Druckprofil mit einem Satz neuer Uhrzeiger hinzugefügt. Der Sekundenzeiger ist sehr schwierig zu drucken. Ich empfehle das Druckprofil dafür zu verwenden.&nbsp;Falls jemand andere größen für die Zeiger benötigt, kann sich gerne melden, ich werde diese dann entsprechend anpassen, und als neues Profil einstellen. (andere Uhrwerke haben andere durchmesser der Zeigeraufnahme)&nbsp;&nbsp;hier ein Bild der neuen Zeiger:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000474912/design/2024-06-01_7576be2244fbb.jpeg"></figure>Folgende Modelle sind hier zu finden:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000474912/design/2024-06-01_5ecca5fcdf595.jpeg"></figure><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000474912/design/2024-06-01_625ef23844f698.jpeg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000474912/design/2024-06-01_03e02f1058c12.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000474912/design/2024-06-02_a44be608295298.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000474912/design/2024-06-02_430f744406a788.jpeg"></figure>

Wall Clock / Wanduhr für Uhrenkomponenten-Kit 011

Uhren

spary3d

There are two versions, one slim and one with infill, which I recommend since it is much more resistant.&nbsp;A simple bucket to the poop of the Bambu Lab A1 Mini, three versions Multicolor, single color and without letters.&nbsp;Update V2 14-10-23 - More walls for better resistance- Smoother Logos&nbsp;Update V2.1 15-10-23- Bigger Bambu Logo&nbsp;Update V3 15-10-23- Reinforced &nbsp;Update 17-10-23- Added a new version with infill more resistant&nbsp;Update 16-12-23- Added A1 Version

A1 and A1 Mini Poop Bucket Slim and With Infill Version, Single and Multicolor Version

Bambu Lab A1

AleProtti

The Moon in the palm of your hand… beatiful sculpture or beautiful lamp. Please rate.

MOON IN THE HAND

Lampen

DjangoCashflow

Check out my other Kit Cards: <a target="_blank" href="https://makerworld.com/en/models/252373#profileId-268741" rel="nofollow noopener">Imperial Lambda Shuttle</a> <a target="_blank" href="https://makerworld.com/en/models/232273#profileId-249216" rel="nofollow noopener">X-Wing</a> Landing Gear can be found <a target="_blank" href="https://makerworld.com/en/models/402365#profileId-303977" rel="nofollow noopener">here</a>Display Stand can be found <a target="_blank" href="https://makerworld.com/en/models/403956#profileId-305629" rel="nofollow noopener">here</a> Set your coordinates for an immersive build experience with the &#34;Millennium Falcon Kit Card,&#34; a high-detail masterpiece that embodies the core of the most storied spacecraft in the Star Wars galaxy. Tailored for enthusiasts who appreciate the confluence of model-making and the cultural phenomenon of Star Wars, this kit is the fruition of a labor of love, designed to honor the cherished memories of fans worldwide. Features:Precision-Crafted Assembly: Developed from the ground up with a 0.4mm nozzle and the Bambu A1&#39;s 180x180 build volume in mind, this Millennium Falcon is designed as a kit card with every detail, ensuring an assembly experience that is both engaging and faithful to the ship’s legendary design.  Tool-Free Construction: Embodying the ease and simplicity of kit card modeling, this Millennium Falcon requires no additional tools or glue for assembly, offering a clean and straightforward build process that reflects the ingenuity of its design.  Intricate Detailing: Every panel, port, and plate is rendered with remarkable precision, inviting builders to explore the Millennium Falcon&#39;s intricate design as seen on the silver screen.  Engaging Build for All Ages: With components engineered for ease of identification and removal, modelers of all skill levels can enjoy bringing this icon of space adventure to life.  Compact and Comprehensive: The kit is thoughtfully planned to utilize the capabilities of the printer, with every detail scaled to be perfectly captured at the size allowed by the nozzle, delivering an incredibly detailed model that belies its simplicity.  Upcoming Enhancements: A custom stand and landing gear are on the horizon, promising to complement your Millennium Falcon display with a touch of elegance. Printing Advise: For a stellar print of the Millennium Falcon Kit Card, stick close to these succinct guidelines or employ the custom profile provided for optimal results:<ul><li>Layer Height: 0.08mm for capturing the finest details.</li><li>Print Speed: Very slow, to ensure precision.</li><li>Infill: 10% lines infill for internal support with minimal material.</li><li>Walls: 2-3 perimeters for robustness without compromising detail.</li></ul>Add modifier to only use ironing on the desired layers: <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_e33ff2e0bc08e.png"><img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_95ac1dfc11b69.png"> Assembly Instructions Look up table for all pieces <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_55fe8b31e5355.png">  <figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/FMXPxzwQ83w"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=FMXPxzwQ83w"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/FMXPxzwQ83w" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure> Step 1: Main Body Assembly<ul><li>Locate the MainBodyMid (labeled as &#39;1&#39; on the kit card).</li><li>Take four pins from the array marked &#34;Pins&#34; on your kit card.</li><li>Align the pins with the holes on the MainBodyMid (1) as indicated in the assembly guide image. Press them firmly into place, ensuring they are securely fitted. <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_a97e4e95e5e6d.png"> Step 2: Securing the Main Body Sections</li><li>Take the MainBodyUpper (2) and MainBodyLower (3) sections from your kit card. Align the MainBodyUpper (2) with the top of the MainBodyMid (1), ensuring the pins inserted previously fit into the designated holes of the upper section.</li><li>Similarly, align the MainBodyLower (3) with the bottom of the MainBodyMid (1), matching the pins to the corresponding holes on the lower section.</li><li>Carefully press both the upper and lower sections onto the pins with equal pressure on both sides to avoid bending or breaking. The pieces should slot together seamlessly, creating a sturdy central structure of your Millennium Falcon. <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_4bf60043625c8.png">  </li></ul>Step 3: Cockpit Assembly<ul><li>Identify the CockpitUpper (4) and CockpitLower (5) pieces from your kit.</li><li>Retrieve a single pin from the &#34;Pins&#34; section.</li><li>Orient the CockpitLower (5) so it aligns with the underside of the CockpitUpper (4).</li><li>Insert the pin through the corresponding hole in the CockpitUpper (4) and press into the hole in the CockpitLower (5) until both halves are firmly connected. <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_4faa352ff2eba.png"> Step 4: Attaching the Cockpit</li><li>Locate the areas on the MainBodyMid (1) where the cockpit will be placed.</li><li>Take two pins from the &#34;Pins&#34; section of your kit card.</li><li>Insert the pins into the holes on the MainBodyMid (1) and MainBodyUpper (2) designated for the cockpit attachment, as shown in the visual guide. <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_5f414a4a83b25.png"></li></ul> Step 5: Finalizing the Cockpit Installation<ul><li>Carefully align the assembled cockpit (comprising CockpitUpper (4) and CockpitLower (5)) with the pins protruding from the MainBodyMid (1) and MainBodyUpper (2).</li><li>Gently slide the cockpit onto the pins until it sits flush against the main body.</li><li>Ensure that the cockpit is securely attached and properly aligned with the rest of the structure, with no gaps or misalignments. <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_3d2b8f76c6bd1.png"></li></ul> Step 6: Sidepiece Installation<ul><li>Select two pins from your kit and locate the pin insertion points on the MainBodyLower(3) and MainBodyUpper (2) where the sidepiece will be attached.</li><li>Carefully insert the pins into the designated holes on both the upper and lower parts of the main body, as indicated in your assembly guide.</li><li>Take the sidepiece (identified as &#39;6&#39; in your parts list) and align it with the pins.</li><li>Press the sidepiece firmly onto the pins, making sure it fits snugly against the main body with no gaps.</li><li>Repeat on other side <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_45856ac8a4cda.png"></li></ul> Step 7: Assembling the Radar Dish<ul><li>Begin by taking the dish (9) and the dish holder (7) from your kit.</li><li>Insert the dish onto the holder, ensuring a tight fit.</li><li>Locate the dish base (8) and find the corresponding pins on the MainBodyUpper (2) that are designated for the radar assembly.</li><li>Align the dish base with the pins, and then carefully fit the dish and holder assembly onto the dish base.</li><li>Once aligned, gently press down so that the entire radar dish assembly attaches securely to the MainBodyUpper (2). <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_78b7bb38cc5aa.png"></li></ul>Step 8: Mounting the Cannons<ul><li>Select the cannons (labeled &#39;10&#39;) from your kit.</li><li>Identify the hole on the top of MainBodyUpper (2) designated for cannon placement.</li><li>Take the pin on the base of a cannon and align it with the hole.</li><li>Gently press the cannon into the hole, applying even pressure until it bottoms out, ensuring it is fully seated and secure.</li><li>Repeat this process with the corresponding cannon on the MainBodyLower (3), ensuring symmetry and proper alignment. <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_8ddc6ea0030d2.png">  </li></ul> Congratulations on Assembling Your Millennium Falcon Kit!You&#39;ve successfully navigated the assembly of this iconic starship, demonstrating skill worthy of a true pilot of the Millennium Falcon. Revel in the craftsmanship and detail of your completed model, a testament to your dedication and the legacy of Star Wars.Enhance Your Millennium Falcon ModelTo complete your display, don&#39;t forget to download the matching stand, landing gear, or the closed hatch, each designed to complement your Millennium Falcon perfectly. These finishing touches will soon be available to elevate your model to exhibition-ready status. Keep an eye out for their release and ready your collection for these final additions!

Millennium Falcon Kit Card - High Detail - No Glue

Kitcard

Lazy_Stupid_Guy

Embark on an exploration of uncharted passion with our innovative 3D Printed Intimacy Game Dice, designed to add adventure and fun to your intimate moments.&nbsp;This set includes two dice—one indicating challenging and exciting actions, while the other highlights different parts of the body. Through a simple roll of the dice, you'll experience spontaneous and thrilling intimate interactions. Don't worry about the printing direction; we've clearly marked it in the pictures, ensuring you can effortlessly print while maintaining uniform wall thickness in all directions.&nbsp;探索激情的未知領域，我們自豪地呈獻這款創新的3D列印性愛遊戲骰子，為您的親密時刻增添一絲冒險與樂趣。&nbsp;這套骰子包括兩顆，其中一顆標示著充滿挑戰與激情的動作，而另一顆則標明身體的各個部位。透過擲骰子的方式，您將享受到隨機而又刺激的親密互動。別擔心列印的方向，我已在圖片中清晰標示，確保您可以輕鬆地按照指示列印，並確保各方向的壁厚均勻。

Sexual dice body parts & motion

Ü18

DatumCAD

<figure class="image image_resized image-style-side" style="width:38.09%;"><img src="https://makerworld.bblmw.com/makerworld/draft/805986/2024-03-20_394e64d5f2285.gif"><figcaption>GIF - Exploded View Animation</figcaption></figure>An adjustable handle that can be attached to any existing standard full-size hacksaw blade. This compact tool allows you use the blade in tight / hard to reach areas, and where a full-frame would foul with the material.&nbsp;I also have various other models for various blade types &amp; are yet more compact in size. Feel free to check those out too:<ul><li><a target="_blank" href="https://makerworld.com/en/models/386059#profileId-286421" rel="nofollow noopener">Junior hacksaw handle</a></li><li><a target="_blank" href="https://makerworld.com/en/models/400706#profileId-302219" rel="nofollow noopener">Jigsaw blade handle</a></li><li><a target="_blank" href="https://makerworld.com/en/models/410315#profileId-312254" rel="nofollow noopener">Reciprocating saw blade handle</a></li></ul>All designs incorporate opposing dual thumb CAM levers with positive snap shut to ensure the blade does not slip once held &amp; it is as safe as possible to use. This took a lot of prototyping &amp; testing but works great. It is quick &amp; toolless to adjust….and satisfying to use as a result.&nbsp;Most standard ‘full size’ hacksaw blades are 0.5&#34; (12.7mm) wide by approximately 0.6 - 0.7mm thick, if you want to double check yours for compatibility as anything this wide (or smaller) should fit fine.&nbsp;Note: The CAM levers have been deliberately designed to be tight fitting to avoid the blade slipping in the tool. That said, if after the first few engagements &amp; releases of the thumb lock it has not eased to a point you are comfortable using it, then you could try printing the smaller CAM levers from the Print profile provided. Additionally, if you have a thinner than standard blade or a loose fit, then you may want to print the Larger CAM Levers profile.&nbsp;If you like this model then you may also like my sliding <a target="_blank" href="https://makerworld.com/en/models/213504#profileId-233069" rel="nofollow noopener">steel ruler limit block</a> which also incorporates a CAM locking mechanism. Or any of my other <a target="_blank" href="https://makerworld.com/en/@DatumCAD" rel="nofollow noopener">DatumCAD</a> designs :)&nbsp;Fasteners: For this model you will need 2x M3 x 30mm fixings which act purely as strong pivot axles to the cam lever.&nbsp;Assembly:<ul><li>Insert the CAM lever into the Housing. Tip: Insert with the level in the closed / horizontal position as the holes will then line up easier.</li><li>Insert M3 Fixings. Tip: The fixings should pass though the handle housing counterbore hole &amp; the CAM lever relatively unhindered, but then will need lightly screwing into far handle hole which has been deliberately sized so as to require some tightening without to much force. (Remember these are just acting as pivot points, no need to tighten down hard, but equally the fixing should not want to fall back out either.)</li><li>Insert Blade. Top Tip: Open both of the CAM levers up around 180degrees from the closed position, so the CAMs don&#39;t grab the blade upon insertion. Once you have in the desired location, simply lock both CAMs fully down.</li><li>Enjoy - your adjustable hacksaw handle is now ready to use.</li></ul>I love designing for 3D printing, please take a look at all my other models which are all free (and will always continue to be)… if you value any of the downloads enough &amp; are able to support me, then please consider buying me a coffee to keep me going! <a target="_blank" href="https://www.buymeacoffee.com/DatumCAD" rel="nofollow noopener">www.buymeacoffee.com/DatumCAD</a><figure class="image image_resized" style="width:55.06%;"><img src="https://makerworld.bblmw.com/makerworld/draft/805986/2024-03-21_6e3d9fd6f9586.jpg"><figcaption><a target="_blank" href="https://makerworld.com/en/models/386059#profileId-286421" rel="nofollow noopener">Link to Junior version</a></figcaption></figure><figure class="image image_resized" style="width:55.01%;"><img src="https://makerworld.bblmw.com/makerworld/draft/805986/2024-03-20_278390d1fc3bb.png"></figure>

Ultimate Hacksaw Handle

Werkzeug

Kierkus

Take this chess set with you where ever you go! The modern pieces can be stored on the bottom side of the board. Just remove the pieces from the card and start playing!

Chess Set Kit Card

Spiele

2emme3dlab

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Eryone Black Transmission Distance: 5 PLA Eryone Red Transmission Distance: 5 PLA Eryone Gray Transmission Distance: 5 PLA Eryone White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #12 (1.04mm) swap to Gray At layer #17 (1.44mm) swap to White for the rest.

Red ranger - Power Rangers HueForge 

Hueforge

fay3dlab

I saw πxel8ed version of the suspended millenium falcon and i was inspired to make my own version.. i thought making the ship facing front with the strings looking like the streaking of lightspeed.. the falcon model by aaskedall from thingerverse was already a great design so i just used his model as a remix.. i did have to slightly change the model so it will print for a smaller version for my suspended millenium falcon..&nbsp;UPDATE:I have uploaded a new version model V3 that can be color picked for multicolor printing.. just learned how to do it.. unfortunately i cant edit the old print profile.. so you'll have to add them manually&nbsp;UPDATE 2:I made a LED version of the suspended millennium falcon that is backlite using led strips.. it is an addon part that will connected to the suspended ship.. so you just have to print the addon LED parts only.. not the whole ship.. i've upload the file at <a target="_blank" href="https://makerworld.com/models/113145" rel="nofollow noopener">https://makerworld.com/models/113145</a> <img src="https://makerworld.bblmw.com/makerworld/draft/491035/2023-12-30_4312a40409637.gif">

Suspended Millennium Falcon

Stringing Art

3DMetalCave

Ich Hör Dich Nicht Ich Drucke Coaster Untersetzer

Ich Hör Dich Nicht Ich Drucke Coaster Untersetzer

Schilder

standitupstore

Sexy Lady Planters &nbsp;3 different Body Types

Sexy Lady's Planters

Deko

Sakul

&nbsp;Brighten up your office breaks with this fun mini table foosball game.A fully functional table soccer set to challenge your colleagues. All you need, aside from the printed parts, are 20 M3x10 and 12 M3x20 screws, and some CA Glue. For assembly, print out all the parts, and start by gluing the playfield into the base. Screw the legs and the ball catchers to the base; you can screw them directly into the plastic, as it will be plenty strong. <figure class="image image_resized" style="width: 61.55%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-01-22_6c8651f7c1e8.jpg"></figure> Glue the side caps into the base, slide the rods in from the side, and also stick the figurines on the rods. The figurines will be fixed in place using the M3x10 screws. All the TPU parts can now be attached using CA Glue. Glue the handles and end caps on the rods, also attach the TPU feet to the legs. The ball is made by gluing the two halves together.<figure class="image image_resized" style="width: 34.44%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-01-22_3727bab3bdd4.jpg"></figure>Lastly, slide the goal indicator over the display shield and then attach it to the base. Have fun playing!  If you like my work and want to support me in creating more free original designs, I would very much appreciate it if you <a target="_blank" href="https://ko-fi.com/sakul" rel="nofollow noopener">“buy me a coffee”.</a>  Check out my newest Uploads: <figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-06-04_09fc049f7c6e.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152653/design/2024-05-01_6d8b75eefb4a4.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>

Office Mini Desk Foosball Table

Kinder

Bastelstuebchen123

Geschenkbox für deine/deinen Liebste/Liebsten.Leg den Riegel rein und bring SIE/IHN zum strahlen.

Duplo Geschenkbox Valentinstag

Geschenke

JGourley86

Slim magnetic case for Digital Mitutoyo 6" Caliper Model CD-6-ASX. Slim case provides protection while retaining the caliper in the case with a magnet. &nbsp;Print in single piece and press/glue in McMaster Carr magnet <a target="_blank" href="https://www.mcmaster.com/5862K418/" rel="nofollow noopener">https://www.mcmaster.com/5862K418/</a>&nbsp;

Ps5

Handy

Raspberry Pi

Handy

Schuhe

Uhren

Bambu Lab A1

Lampen

Kitcard

Ü18

Werkzeug

Spiele

Hueforge

Stringing Art

Schilder

Deko

Kinder

Geschenke

Nützliches