andre_caminha

HpInvent

Right now I&#39;m a little into modern plant pots for all my plants at home. So I designed some new ones. → The new soft Fabric Pot Collection Hope you like the design ! There are differtent versions availible in the print profiles Just choose the print profile you like best. The Pots can simply be scaled to you demands&nbsp;On my photos is the 60mm Version. Its the most tricky to print. For the bigger versions you get much more details and smoother overall look. I normaly tend to show the worst prints I made so you can see what the minimum result is.&nbsp;Due to many requests for commercial licenses for my 3D models I created a patreon page. You can become a member to get permission for commercial use or just want to support my work : <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener">https://www.patreon.com/user?u=79128277</a>&nbsp;If you Just want to give a one time Support you can buy me a coffe here ;)  <a target="_blank" href="https://buymeacoffee.com/hpinvent" rel="nofollow noopener">https://buymeacoffee.com/hpinvent</a>&nbsp;Here is a small Sneak Peak of a coming Bathroom Set  More Information about the launch date and early acces can be found on my Patreon. <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-06-14_835436fae26ee.png"></a>&nbsp;Also check out my other Designs!I have a bunch more stuff in my profile!! <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a><a target="_blank" href="https://makerworld.com/en/models/428498" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-04-18_7588ba5642a27.png"></a><a target="_blank" href="https://makerworld.com/en/models/426994" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-04-15_b0f8912a15393.png"></a><a target="_blank" href="https://makerworld.com/en/models/427979" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-04-15_b1e75bac7bd51.png"></a><a target="_blank" href="https://makerworld.com/en/models/416941" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-04-08_ebe2de8bae1b3.png"></a><a target="_blank" href="https://makerworld.com/en/models/232706" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-03-06_ea517b7dbe741.png"></a><a target="_blank" href="https://makerworld.com/en/models/394559" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-03-27_3b061a50c97b7.png"></a> <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452212/design/2024-03-08_a8a626fc04c78.png"></a>  &nbsp;&nbsp;&nbsp;Happy printing!

Inflated soft Cloth Planter Plant Pot Vase Series6

vasos

Kizu Studios

Lid to create your own piggy banksOriginal file: <a target="_blank" href="https://www.printables.com/es/model/272261-fillopening-with-plug-for-use-in-your-own-design/related" rel="nofollow noopener">https://www.printables.com/es/model/272261-fillopening-with-plug-for-use-in-your-own-design/related</a>Tutorial: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=BoPfx_m9bgQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/BoPfx_m9bgQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Fillopening with plug for use in your own design

parts

jakubhroch

F1 wall design.&nbsp;Reccomended 0,4 noozle and 0,28 layer

Formula 1 Wall Decoration  

2d art

Rouge3D

Dove of Peace Wall ArtI uploaded 2 versions, a thin and a thick one. I only printed the thick one.&nbsp;&nbsp;Commercial use is allowed with attribution please with a link. Thank you!&nbsp;

Dove Of Peace Wall Art - Easter wall Decor

pascoa

leoax19980

This is a front wheel riser for bike trainer and I tested with 700C and 25mm Tyre but should fit 30mm tyre and maybe bigger

Bike Trainer Front Wheel Riser

projetos

planpa3d

For the best results of printing this design please check out the remix by plasonite https://makerworld.com/en/u/3776083722&nbsp;Happy valentines you wicked ones!! HahaLove the colors, Duramic silk red and CC3D Black Marble PLA, just pop together.To create this wicked heart make sure to use a brim when printing the main heart piece and it should print out just fine without supports, in fact non of the parts will need supports.I included two different tails a shorter one as in the picture and a tall one. Witchever you prefer, again no supports needed.I would recomend glueing the heart to the tail first and letting it set up for awile before attempting to glue the other pieces on to the heart.The horns should just press into place without issue.The wings I printed out flat to the build plate, and once everything was glued together I hit them lightly with a heat gun / hairdryer to give them a stylized lookI printed out the wicked smile and hit it with a heat gun as well, shapeing it around the heart before glueing it into place.The tail point top and bottom I glued together before attaching it to the tail itself.I highly recomend 3D gloop as glue for this model as the conection between the tail and heart broke free on me when useing just Super Glue / C A glue. If you dont have any 3D gloop, try fileing or sanding the tail part flat before glueing the heart on top.You can follow me on instagram, <a target="_blank" href="https://www.instagram.com/pla.n.pa/" rel="nofollow noopener">https://www.instagram.com/pla.n.pa/</a>to find out what I designs I am currently working onIf your interested in selling prints of my designs, become a Patreon supporter here… <a target="_blank" href="https://patreon.com/planpa3d" rel="nofollow noopener">https://patreon.com/planpa3d</a>Thanks for checking out my design.Have fun and happy printing!!<h3>Print Settings</h3>Rafts:NoSupports: NoResolution:.2&nbsp;Category: Art

Wicked winged heart

Valentine's

jocin_

Addition 14.06.2024I found  the G-Code adaption which <a target="_blank" href="https://makerworld.com/en/@AdamL" rel="nofollow noopener">AdamL</a> introduced with his model: <a target="_blank" href="https://makerworld.com/en/models/467118#profileId-378814" rel="nofollow noopener">The Scrubbler: Enhanced X1/P1 Nozzle Wiper</a> very cool and a awesome idea, thanks for sharing this idea. I took inspiration from this and implemented my own version in the Change filament G-Code. Also I adapted AdamL ´s code for the Machine start G-Code so that the travel path is lower and fits my design better. During testing I mentioned that lower acceleration of about 15000 had a better cleaning effect. But could be that this is specific for my X1C.If you want to implement this i uploaded a instruction “240614_nozzle_rub_G-Code_adaption.pdf”, you find it under: “Documentation”.&nbsp;This is what it looks like:<ul><li>Machine start G-Code <img class="image_resized" style="width: 43.78%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_5952291fb477b.gif">  </li><li>Change filament G-Code <img class="image_resized" style="width: 43.85%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_4d3b92720c696.gif"></li></ul>&nbsp;Have fun!_________________________________________________________________________________________________________________________________________Update 08.01.2024Quick update on the tray for both brushes. Added a small plug to the bottom of the tray to prevent it from rotating because there where some issues reported with that.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_90b8ac2f999d08.jpg">New raw model files:<ul><li>A1-Brush:<ul><li>Nozzle_wiper_x1c_with_a1_brush v3.step</li><li>tray_A1_v3.stl</li></ul></li><li>A1-mini-Brush:<ul><li>Nozzle_wiper_x1c_with_a1-mini_brush_v2.step</li><li>tray_A1-mini_v2.stl</li></ul></li></ul>Updated all my print profiles with a second plate which contains the new version.&nbsp;If want to use your own print profiles, use arachne wall generator and orientate the Tray like this:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_a51cb51bab44c8.jpg">&nbsp;This compromises the print ability of the tray and supports are needed, use paint on supports like this:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_595ac1760a20b8.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_8c081c3a42f8f.jpg">Support setting:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_f5ff07781ab9.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_be0bf17e5065d.jpg">!Be care full to not hurt yourself when removing the supports in the tray, use pliers or a small slotted screwdriver!&nbsp;Thank´s to all for the feedback____________________________________________________________________________________________________________________________________________________Update 04.01.2024New A1 brush version, with following changes:<ul><li>Chamfer on the tray  </li><li>Lowered height of the block 0,5 mm</li></ul>Thanks <a target="_blank" href="https://www.printables.com/@coreyward" rel="nofollow noopener">@coreyward</a> for the suggestions&nbsp;Addition for print settings:If want to use your own print profiles use the arachne wall generator to get a support for the overhang on the block.<img class="image_resized" style="width: 30.29%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/163521ea-447a-44a5-a9cb-dd1d5dfe496e.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_3a22e0a17d5b7.png">&nbsp;________________________________________________________________________________________________________________&nbsp;Update 26.12.2023On request I adapted the design to fit the A1 brush. Under “Raw model files” there are now two folders, use the parts in the “A1-Brush” folder if you want to use the A1 brush. Both parts are needed to use the A1 brush.Just import the parts in one of the existing print profiles, orientate them the same way and print;-)!Attention! with the A1 brush there is very little clearance between the tray and the build plate, so make sure to align the build plate properly.<img class="image_resized" style="width: 38.16%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_ccf6556620e57.jpg">&nbsp;Thanks @<a target="_blank" href="https://makerworld.com/de/u/2924277124" rel="nofollow noopener">GE_AMX</a> and @<a target="_blank" href="https://makerworld.com/de/u/2038862755" rel="nofollow noopener">kevman</a> for testing_____________________________________________________________________________________________________________Update 20.12.2023I used the A1-Mini brush, as it is different to the A1 i:<ul><li>corrected the link</li><li>corrected the description</li></ul>Thanks <a target="_blank" href="https://www.printables.com/@schiko" rel="nofollow noopener">@schiko</a> for pointing that out on printables.com_______________________________________________________________________________________________________________I liked the nozzle brush of the A1-Mini, so i designed two parts to use it on my X1C along with the original wiper.Needed parts:<ul><li>for mounting use the original screw for the nozzle wiper, 3 of them are needed</li><li>A1-Mini nozzle brush <a target="_blank" href="https://store.bambulab.com/products/heatbed-nozzle-wiper-a1-mini?skr=yes" rel="nofollow noopener">https://store.bambulab.com/products/heatbed-nozzle-wiper-a1-mini?skr=yes</a>  </li><li>some double-sided adhesive tape <img class="image_resized" style="width: 52.08%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_1a14497a8d7958.jpg"></li></ul>Mounting:<ol><li>Mount the original nozzle wiper on the block <img class="image_resized" style="width: 40.83%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_72222ec740b41.jpg"></li><li>Mount the block to the poop chute <img class="image_resized" style="width: 44.99%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_aa9d2448f7399.jpg"></li><li>Cute the A1-Mini nozzle brush to 10 mm length put some double-sided adhesive tape to the bottom and put it in the tray <img class="image_resized" style="width: 19.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_06cde2db1acfe.jpg"><img class="image_resized" style="width: 22.2%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_1d57b502adf3a.jpg"><img class="image_resized" style="width: 28.98%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_8eab04be6eec8.jpg"></li><li>Mount the tray on top of the block <img class="image_resized" style="width: 47.42%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_dd9145e102d4b.jpg"></li></ol>Filament: extrudr greentec pro (or ABS, ASA, PETG etc.)Print settings:<ul><li>orientation: see picture and attached 3mf</li><li>layer height: 0.12</li><li>wall generator: arachne (edit 04.01.2024)</li><li>wall loops: 3</li><li>Top/bottom layers: 6</li><li>infill: 10% gyorid</li><li>support: no</li><li>brim: no</li></ul>