andre7504

Hanti_3d

<h2>A simple filament clip which prevents the filament from unwinding reliably!</h2> I&#39;ve tested many filament clips in the past, but couldn&#39;t find one that I was 100% satisfied with. Out of this need I have designed this small clip!<h4> Fast and easy to print, prevents filament tangling for ALL spools!  </h4>Recommended to print the clip with regular PLA. Only requires 1 gr of filament an 4 minutes of print time!<h4> Recommend to also check my lastest version:<a target="_blank" href="https://makerworld.com/en/models/490880#profileId-404364" rel="nofollow noopener"> https://makerworld.com/en/models/490880#profileId-404364</a>  </h4>

Universal Filament Clip

Tools

BillyMayonaiz

Hello!&nbsp;The 3mf of this benchy can be imported to either Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as potentially optimal profiles for TPU printing, specifically Overture (as it is a low entry price for TPU). As a breakdown:<ul><li>Filament Profile: Overture TPU - Black: This config is for the filament. The print shown above is done with recently opened TPU from Overture (like the morning before posting this), so if you get different results with blobs/underextruding, dry your filament.</li><li>Print Profile: 0.20mm Standard - TPU: This config is for all the process settings. Basically, the main thing is that the printer will be printing slow. It needs to to be able to print TPU reliably.</li></ul>This print was made with only the part cooling fan. If printing with a P1S, just make sure to open either your top cover or the front door to allow for ventilation. I also am running stock everything else, so whatever machine you got out of the box, this profile should be close enough to work.&nbsp;Hope this works!&nbsp;*Obligatory benchy included for print model

P1S/P1P Overture TPU Config File

configs

Lucky 13 Toys

<h3>Dummy 13 is now on a CC BY 4.0 license!</h3>This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on your product page:<figure class="table"><table><tbody><tr><td><a target="_blank" href="https://makerworld.com/en/models/183780#profileId-202639" rel="nofollow noopener">DUMMY 13 Printable Jointed Figure </a>© 2023 by <a target="_blank" href="https://www.lucky13toys.com/" rel="nofollow noopener">Lucky 13 Toys </a>is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY 4.0 </a></td></tr></tbody></table></figure>Please help me build my identity as a creator by referring to this design by its original name. Don't pass off my work as your own product. Too many people are doing that already!&nbsp;Want to support future projects with a one-time donation? <a target="_blank" href="https://www.paypal.com/donate/?business=65FUQ2SJMYDDS&no_recurring=0&item_name=Thanks+for+supporting+Lucky+13%21&currency_code=USD" rel="nofollow noopener">Make a PayPal donation here!</a>&nbsp;&nbsp;&nbsp;<a target="_blank" href="https://www.printables.com/@soozafone/activity/4153" rel="nofollow noopener">This is my own work, originally uploaded to Printables.</a>&nbsp;Yes, Dummy 13 is now on MakerWorld.&nbsp;<h3>Please read before printing:</h3>This is a work in progress. It has been collecting virtual dust while I work on other projects, so I've decided to release it now in a “beta” state. I don't have a timeline for when the final version will be finished, but the current files are fairly complete - just lacking some perfectionist polish. Please understand that there is some room for improvement here. I welcome your feedback to help make this design the best it can be.&nbsp;What's finished right now: Design of all parts, except for minor tweaks based on feedback. Basic instructions.&nbsp;What's not finished: Parts on runners for better adhesion without brims. More detailed instructions. Fusion 360 and STEP files for Printables Club members (please note that these will not be available until the design is finalized). Any updates based on feedback.&nbsp;Can I sell it? Yes, Dummy 13 is distributed under a CC BY 4.0 license that does allow commercial use, provided that you provide proper attribution.&nbsp;If you'd like to say thanks and help support future development, you can make a one-time donation <a target="_blank" href="https://www.paypal.com/donate/?business=65FUQ2SJMYDDS&no_recurring=0&item_name=Thanks+for+supporting+Lucky+13%21&currency_code=USD" rel="nofollow noopener">here</a> :)&nbsp;---&nbsp;<h3>Introducing Dummy 13!</h3>(…working title.)This is another variant on <a target="_blank" href="https://www.printables.com/model/148367-lucky-13-printable-jointed-figure" rel="nofollow noopener">Lucky 13</a>, and I actually started designing it before <a target="_blank" href="https://www.printables.com/model/422353-mini-13-printable-jointed-figure" rel="nofollow noopener">Mini 13</a> or <a target="_blank" href="https://www.printables.com/model/555170-easy-13-printable-jointed-figure" rel="nofollow noopener">Easy 13</a>. As you can probably tell, my goal here was to bring some more humanlike proportions to the figure, while also improving the way everything fits together.&nbsp;My hope is that this will be an easier print than the original Lucky 13, though still a step up from Mini and Easy.&nbsp;<h3>Printing</h3>As with the original, Dummy 13 is made up of an inner "frame" with a layer of “armor” over top. You can use the material of your choice for the armor, but you should print the frame with a strong and sturdy material like ABS, ASA, or PETG. I mostly use ASA.&nbsp;PLA is not recommended for the frame. If you print the frame in PLA and complain that it broke or went floppy, I'm going to be like, “yeah dude, I told you not to.”&nbsp;All parts print without supports and you should not need to reorient anything. Bed adhesion is the toughest part of this print. For better adhesion try slowing down your first layer, printing external perimeters first, and adding a brim if needed. Use 0.15mm layers (0.2mm first layer).&nbsp;You can use the included 3MF files with pre-plated parts, or arrange the individual parts yourself. If a part starts with “2x” or “4x,” print that many copies. There are also a couple extra bits (a simple staff accessory and an adapter for the <a target="_blank" href="https://www.printables.com/model/563861-lucky-13-display-base-20" rel="nofollow noopener">display base</a>) that are included separately.&nbsp;Recommended print settings (100% scale, 0.4mm nozzle)<figure class="table"><table><tbody><tr><td rowspan="2">Material</td><td>Frame parts</td><td>ABS, ASA, or PETG</td></tr><tr><td>Armor parts</td><td>Any</td></tr><tr><td rowspan="2">Layer height</td><td>First layer</td><td>0.2 mm</td></tr><tr><td>Other layers</td><td>0.15 mm</td></tr><tr><td colspan="2">Infill</td><td>20% rectilinear</td></tr><tr><td colspan="2">First layer speed</td><td>25% of default</td></tr><tr><td colspan="2">Elephant foot compensation</td><td>0.15 mm</td></tr><tr><td colspan="2">Supports</td><td>None</td></tr><tr><td colspan="2">Brim</td><td>As needed (depends on bed adhesion)</td></tr><tr><td colspan="2">Additional settings</td><td>☑ Print external perimeters first</td></tr></tbody></table></figure>&nbsp;<h3>Assembly</h3>Follow this video for assembly instructions. Pay attention - some parts look very similar!<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Rwu3UP0cHZw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Rwu3UP0cHZw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<h3>Customizing</h3>Dummy 13 should be compatible with most handheld accessories made for my other designs. Check out Lucky 13's <a target="_blank" href="https://www.printables.com/model/148367-lucky-13-printable-jointed-figure/remixes" rel="nofollow noopener">remixes page</a> for a good starting point!&nbsp;&nbsp;This design has already been stolen and stripped of attribution a hundred times over. Please don't add to that.

DUMMY 13 Printable Jointed Figure (beta files)

Toys

TheMiguelBi

<h3>Even an indoor office needs a patch of grass to organize the cables! Always in style!</h3>--------------------------------------This is a stylish way to group all the various power cables together, concentrating them in one place. Phone, Power bank, wireless earphones, electronic cigarette. Everything will find a place on this lawn!&nbsp;Only one cable in, many cables out!&nbsp;&nbsp;<a target="_blank" href="https://makerworld.com/en/models/410246" rel="nofollow noopener">Tiny Poop Minifigures: https://makerworld.com/en/models/410246</a><a target="_blank" href="https://makerworld.com/en/models/413253" rel="nofollow noopener">Fake VGA: https://makerworld.com/en/models/413253</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/813735/2024-04-04_6e0bba1d6c5ec.jpg"></figure>&nbsp;— — Other versions:<ul><li>BIG: 25.5 x 15.7 x 13 cm</li><li>MEDIUM: 17.1 x 10.6 x 10.3 cm</li><li>SMALL: 13 x 8 x 8 cm</li></ul>— — &nbsp;There are three pieces needed,and assembly is very simple:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/813735/2024-01-30_60dbcc90422e6.jpg"></figure>&nbsp;--------------------------------------For the <a target="_blank" href="https://makerworld.com/en/models/159176" rel="nofollow noopener">magnetic cable holders</a>, here: <a target="_blank" href="https://makerworld.com/en/models/159176" rel="nofollow noopener">https://makerworld.com/en/models/159176</a>--------------------------------------&nbsp;Two sizes available, also for A1mini:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/813735/2024-01-27_24059c4c65637.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/813735/2024-01-27_12e92f818eda6.jpg"></figure>&nbsp;&nbsp;To remove the wall at the end of the print, common scissors can be used (this will involve removing a larger portion of grass). I used the common <a target="_blank" href="https://makerworld.com/en/models/12702" rel="nofollow noopener">BambuLab scraper</a>, placing it on a sturdy surface and paying attention gives a good result. Don&#39;t worry if some tufts are crushed during this operation, then by using the clod of grass everything will become homogeneous over time.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/813735/2024-01-30_42126cb9b6668.jpg"></figure>&nbsp;&nbsp;&nbsp; (\(\ ( =’:’) (..(“)(“)Good work! &nbsp;--------------------------------------

Office lawn cable organizer

ToMake

LandyAnd

Land Rover defender hooked internal door lock button.&nbsp; These are ideal for reaching the button from the top if aftermarket seats or rail extensions are fitted. The top of the button protrudes from the top of the door card and has a groove to provide grip. The interface with the control rod remains the same.&nbsp;There are more variations on the way, as I develop the design further. If you have any improvements, please leave a comment or remix this model. A STEP file is attached.&nbsp;UpdateThis is another iteration of the internal door lock button upgrade. To fit these, the door card will need to be fitted over the hook perpendicular to the door, but will fit with relative ease. You may want to check this before you commit to fitting these if you have old, aftermarket or upgraded door cards.&nbsp;DisclaimerCheck part dimensions and print settings before printing. These print settings are what I have used and not a recommendation.

Tools

configs

Toys

ToMake

LandRover