amatff

cyanidesugar

Can it do the Kessel Run in 12 parsecs? Who knows?! &nbsp;This is a fairly simple print-in-place Hueforge Hybrid print-in-place piece that combines filament painting methods and traditional 3D printing methods in one singular print. It utilises 4 filament colours, 3 for the Hueforge print, and one for the Millennium Falcon. &nbsp;If you are using the one-click 3MF file on Makerworld, all appropriate settings have been applied to the print. If you are not using the one-click printing method, or are NOT using a Bambu printer, see the print instructions below: &nbsp;Print Instructions: <ol><li>Print the hueforge print (0mm - 2.08mm) at 100% infill.</li><li>The Millennium Falcon portion of the print (2.08mm - 80mm) should be printed at 10% infill, with 3 wall loops, 3 top and bottom surfaces. I used a layer height of 0.16mm.</li><li>You can achieve this by using a layer height modifier in your slicer to modify layers 2.08mm-80mm.</li><li>You do not need any supports for this print. </li><li>I used Burnt Titanium as the background for the print, but you can use any variation of a dark or black colour.</li><li>I used Polymaker's Starlight Mercury for the Millennium Falcon, but you can use any gray or silver variant, or whatever you like!</li></ol>Filament Swaps: &nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm&nbsp;Filaments Used: - PLA Flashforge Burnt Titanium Transmission Distance: 2.5 - (You can use black!) - PLA META Sunlu Teal Transmission Distance: 5.4 - PLA Kingroon White Transmission Distance: 8- PLA Polymaker Starlight Mercury (This is for the Millennium Falcon!)&nbsp;Swap Instructions: - Start with Burnt Titanium - At layer #7 (0.68mm) swap to Teal - At layer #11 (1mm) swap to White- At layer #23 (1.96) swap to Starlight Mercury (this is the Falcon!)&nbsp;The wonderful Millennium Falcon model was sourced from <a target="_blank" href="https://www.printables.com/model/212461-fillenium-malcon-improved" rel="nofollow noopener">here</a> by <a target="_blank" href="https://www.printables.com/@Gareth42_280557" rel="nofollow noopener">Gareth42</a>. If you haven't yet, you should definitely print the standalone model, because it it marvellous! &nbsp;Have fun, and let me know how you go with the print! &nbsp;____________________________________ Commercial License to Sell PrintsIf you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my <a target="_blank" href="https://patreon.com/cyanidesugar3DP?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link" rel="nofollow noopener">Patreon</a>! ____________________________________&nbsp;

Piece of Junk in Space - Hueforge Hybrid Print

Jocs

Supergrapher

Update:18th of Jun 2024<ol><li>Just tidying up of the files and a small update for the nozzles. </li><li>The Paint-On numbered covers are kept as a seperate file</li><li>The extra nozzles are now part of the main file.</li></ol>&nbsp;12th of Jun 2024<ol><li>Tweaked the port holes so it grips the PTFE tubes better. (In case you don&#39;t know, you can use PTFE tubes instead of the printed nozzles)</li><li>Very slightly narrow the for hole for the hygrometer so it fits tighter.</li><li>Changed the style of the brackets and the fonts to match that of the Covers</li></ol>11th of Jun 2024<ol><li>Tweaked the internal geometry of the nozzles to reduce rubbing as the filament travels through it. </li><li>If you feel are you getting too much resistance or rubbing from the original Nozzles, you can try wider Nozzles. You can find the Nozzle Pack under print profiles. These nozzles comes in a choice of Original, +0.05 and +0.10. </li></ol>8th of Jun 2024<ol><li>Sliced abit off the side of the cover to make the cover easier to fit when using the top mount. I missed the measurement, it will fit, but just barely. If you are using my Clip-On Top Mount, I&#39;ve updated the file so it works now. </li><li>I&#39;ve brought back the Paint-On numbers for the cover. You can color it yourself (the stencil will appear when you use the Bambu Studio Paint function) or you can just use the one I uploaded under print profiles. <img class="image_resized" style="width: 45.16%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-09_cc8d5d3eff2808.jpg"></li><li>Small adjustments to the clips to make it snap tighter. I&#39;ve also reduced the size of the release lever incase it catches on the spool.</li></ol>&nbsp;&nbsp;Finally I&#39;ve created the ULTIMATE FILAMENT SPOOL ENCLOSURE for the AMS LITE!&nbsp;Thank you for all the support and feedback on the previous design. I’ve incorporated everything I’ve learned to create a new design that I believe is better and more user-friendly. Now, installing and feeding filament is so much easier. The cover is attached using clips, making the process more straightforward. No additional tools or parts are needed, and you have a choice of action panels and action buckets to suit your needs.&nbsp;My favorite action panel is the dual monitoring (inside/outside) hygrometer panel.&nbsp;This is also compatible with my and Bambulab&#39;s AMS lite top mount. You&#39;ll need to remove the screw on the Bambulab version.&nbsp;Installation is also relatively easy. Let’s get started!&nbsp;NOTE PLA for all partsPETG for the clips&nbsp;InstructionsConnect the buckets together as shown using the clips.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_c0d1267bb22298.jpg"></figure>Install the plugs by press-fitting them. They don&#39;t need to go in all the way; stop once they are tight. The round-based ones are for the filament to go through, while the square ones are for sealing. &nbsp;I&#39;ve also designed it so that you can use a PTFE tube if preferred. Just gently push it through the hole. I would recommend a very short tube of 2 to 4cm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_d54667eaaf1b5.jpg"></figure>Install the setup onto the AMS Lite. Connect the covers and your choice of action panel together using the clips.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_cbde24d2cc6688.jpg"></figure>Work your way around the perimeter of the hygrometer and it should pop into place in the recess. It sits flush when installed correctly. Note that the hygrometer is held in place by it&#39;s brim and not the clips.&nbsp;<a target="_blank" href="https://www.amazon.com/dp/B07GR67G1M" rel="nofollow noopener">https://www.amazon.com/dp/B07GR67G1M</a><a target="_blank" href="https://www.aliexpress.com/item/1005005582069823.html?spm=a2g0o.order_detail.order_detail_item.3.5f81f19cqwKmYb" rel="nofollow noopener">https://www.aliexpress.com/item/1005005582069823.html?spm=a2g0o.order_detail.order_detail_item.3.5f81f19cqwKmYb</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-17_60b39b7d93afc.jpg"></figure>Install your choice of Action Buckets.<figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_2a590d0bc9a088.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_69b8c7c9fe3ff8.jpg"></figure>Attach the cover using the clips. You may also also install the brackets for additional stability.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486153/design/2024-06-06_22d56660fab948.jpg"></figure>&nbsp;&nbsp;That&#39;s it, I guess the rest should be quite self explanatory.&nbsp;Have Fun!

Ultimate Filament Spool Enclosure 封箱 for AMS Lite

Madness3D

Optimized for 3D printing with a amazing depth of field.&nbsp;The Glowing series is optimized with 2 filaments for the most popping effect when matched with glow in the dark filament.&nbsp;It can be printed with either glow in the dark filament or with plain bambu lab green filament (without the glow in the dark effect)..&nbsp;There are 2 print profiles available.200x200 is optimized for x1c, p1s, p1p150x150 is optimized for A1 mini.&nbsp;Pictures can be printed with out AMS by following the print instructions below.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 4.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 16Swap Instructions: Start with Charcoal At layer #12 (1.04mm) swap to BambuLab Green for the rest.&nbsp;&nbsp;Art generated with midjourney and optimized for 3D printing with Hueforge.

"Glowing" - Rudolph 3

nocturn

chromos

ich eine Xiaomi Watch 2 Pro geschenk bekommen habe, wollt ich eine Ladestation dafür drucken.Mir hat das Modell von jake_social (<a target="_blank" href="https://www.printables.com/de/model/355408-xiaomi-watch-s1-charging-stand" rel="nofollow noopener">https://www.printables.com/de/model/355408-xiaomi-watch-s1-charging-stand</a>) sehr gut gefallen und ich habe es nachkonstruiert und angepasst für die Watch S2 Pro sowie ein paar kleine Änderungen (keine Ahnung ob diese Ladestation von jake_social auch ohne Anpassung funktioniert hätte). Ich habe leider keine STL Datei sondern nur eine Step und die original SW2023 Datei.Gedruckt habe ich mit Bambu Lab PLA Matte, Layer 0,2, Düse 0,4, mit Stützen, reduzierte Geschwindigkeit (weil ich es wollte) Bei den Stützen habe ich als Zwischenlage zwischen Stützen und Modell PETG genommen und somit an den Stützstellen eine gute Oberfläche erhalten.(Siehe Anleitung hier : <a target="_blank" href="https://www.youtube.com/watch?v=Matf1Mna2zI" rel="nofollow noopener">https://www.youtube.com/watch?v=Matf1Mna2zI</a>)&nbsp;I received a Xiaomi Watch 2 Pro as a gift, I wanted to print a charging station for it.I really liked the model from jake_social (<a target="_blank" href="https://www.printables.com/de/model/355408-xiaomi-watch-s1-charging-stand" rel="nofollow noopener">https://www.printables.com/de/model/355408-xiaomi-watch-s1-charging-stand</a>) and I redesigned it and adapted it for the Wtach S2 Pro as well as making a few small changes (I have no idea whether this charging station from jake_social would have worked without adaptation). Unfortunately I don't have an STL file but only a step and the original SW2023 file. I printed with Bambu lab PLA matte, Layer 0,2, nozzle 0,4, with support, reduced speed (because I wanted it). For the supports I used PETG as an intermediate layer between the supports and the model and thus obtained a good surface at the support points.(See instructions here: <a target="_blank" href="https://www.youtube.com/watch?v=Matf1Mna2zI" rel="nofollow noopener">https://www.youtube.com/watch?v=Matf1Mna2zI</a>)

charging stand base / Ladestation Xiaomi Watch S2 Pro

watch

3D.p3Dro

This is a remix for Yi Cam A1.I search but only have to A1 mini, and a make changes to fit on A1.