amabbad

Ciuf_Ciuf

<h2>General description</h2>After the great success of the drainage project, I am proposing a simpler and more intuitive version, especially for new users and beginners who are approaching the world of multicolor.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/54909#profileId-56456" rel="nofollow noopener">https://makerworld.com/en/models/54909#profileId-56456</a>&nbsp;The basic purpose is always to minimize purging material as much as possible to save on color changes and drastically reduce the amount of discarded materialI have decided to update the model and make it more user-friendlyThe basic idea was to make it a standard Bambulab Calibration, similar to the K calibrationSo, lines with numbers to instantly identify which value is the most accurate to assign to the purging of the respective materialBeing a test, it must be as economical as possible, so a test strip requires only 2 grams&nbsp;I'm leaving you the video of a guy who explains in detail how to use this type of calibrationI thank him for considering my project for the creation of a video on YouTube, and I'm pleased that I've shared his video<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=FP3CwBX6A4I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/FP3CwBX6A4I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3> </h3><h3>Pre-print Procedure</h3>*Edit 03-01-2024*&nbsp;From one of the various print profiles you download, you'll need to set the color combination you desire<figure class="image image_resized" style="width:47.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_36c2f25737bbb.png"></figure>In my case, I'm calibrating these purge combinations, and the model will result like this<figure class="image image_resized" style="width:36.6%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_e5017ae8f46d08.png"></figure>If you want to change the color combination, simply use a different type of filament<figure class="image image_resized" style="width:37.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_a174ecda4566d.png"></figure>and the print profile will adapt to the combination you have set, as in this case<figure class="image image_resized" style="width:37.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_f1abfb2fe5f0a8.png"></figure>The model will update in real-time, allowing you to see immediately which color you are changingI've implemented additional print profiles to significantly streamline the procedure.While the process can be fast for those with a single AMS, it might be quite lengthy for those with multiple using the previous print profiles.With these new print profiles, there is also increased compatibility for the A1 Mini model.&nbsp;The idea of implementing the print profiles in this new way was suggested by Michael when he uploaded his print profile for the V1 model. I'll leave you the link to his Makerword channel (<a target="_blank" href="https://makerworld.com/en/u/2954682459" rel="nofollow noopener">https://makerworld.com/en/u/2954682459</a>)&nbsp;As on the previous model, it is necessary to reduce the purging material to allow us to calculate the material quantity adequately.The only significant difference is that this time we set all purging quantities to 0On the dual-object print profile, you can also do it manually.However, on the other print profiles, if you want to expedite the process, you can set the multiplier to 0, instantly reducing the purge to 0<figure class="image image_resized" style="width:35.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_f161c5ce7c0868.png"></figure>Now you can start the printing process&nbsp;Note: Do not touch any other parameters I've set, or the colors won't be printed in the correct order<h3>Calibration reading</h3>After completing the print, for calibrating the K factor, we need to read and determine the most accurate value to set as the purging quantityWhat you will find in front of you will be this<figure class="image image_resized" style="width:46.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_02e09355d1abf8.jpg"></figure>As you can see inside the two green rectangles, that is the exact moment when the material is purged, and the next color takes over.<figure class="image image_resized" style="width:46.78%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_617da72c674e78.jpg"></figure>At this point, all that's left is to identify the correct value and set the purging quantity for that specific color changeFor these tests, it's highlighted that 150mm^3 of material is required to perform the color change<figure class="image image_resized" style="width:46.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_e9817c7179a71.jpg"></figure>In this specific case, the quantity is identical for both color changes, but for other combinations, it may varyAs you can see, the difference between the default values of Bambustudio and the ones just found is significantly lower.This allows us to reduce material waste and significantly cut down on print times, decreasing the time the printer takes to change the filament<figure class="image image_resized" style="width:35.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_a67e103190684.png"><figcaption>BEFORE</figcaption></figure><figure class="image image_resized" style="width:35.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_ab83cab72d7d18.png"><figcaption>AFTER</figcaption></figure>&nbsp;

AMS Purge Calibration V2

Calibration 

SThane

After printing a couple other models that didn't seal properly, I decided to pick a well-designed model and make a few changes to seal it as much as possible. There are now three versions of the tray:<ol><li>The first version can be printed face-up, and does not include the logo.</li><li>The second version is multi-color, and meant to be printed face-down, to maximize quality and minimize filament swaps.</li><li>NEW! - The third version addresses the most common feedback - make it stronger, and make it work with the original AMS Lids</li></ol>For the first two, I've reinforced the desiccant opening, provided an improved snap-fit lid with a tab to indicate the proper orientation, updated the funnel adapter to fit into the container better, added the funnel, and added brims to the two funnel parts. The funnel can also be use with this <a target="_blank" href="https://makerworld.com/en/models/28349#profileId-24748" rel="nofollow noopener">AMS Desiccant Pod</a>. &nbsp;For the third design, I've made the desiccant tray shorter, and inset the lid, to make it flush, and so it can be concealed behind the original AMS lid. I've also made the desiccant openings deeper, so that the top is much sturdier.&nbsp;Note: See the attached photos for the best way to insert the lid. If you insert the left or right side first, then press the other side, you risk breaking the model. Please insert the edge closest to the logo first, then push the tab back towards the other tab. It may be a bit snug, but if you insert it at a slight angle the first time, you can then easily slide it into place.

Sealed AMS Rear Desiccant Tray

AMS Accessories

FrancescoM

This project contains all the tools for maintaining your printer. Remove the original hinge screws, free the holes with a cutter and use two 3x8mm screws. I recommend reusing the zipper seals.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/383145/2024-01-05_6a22b77280e0d.png">&nbsp;&nbsp;Don't leave negative comments, but give useful advice to improve the project, so as to help the community improve. Thank you

Mini Tool

Ideas

wojteq5

I recommend printing with PETG (better bending and temperature resistance)

DJI Mavic 3 HUB cover

squinn

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_fd01d80e216de.gif"></figure>This model is an easy print that requires no supports, and three different sizes are provided to accommodate cables of different lengths. If you're not sure which to choose, I'd recommend starting with the “medium” size.&nbsp;After printing, you'll want to place the cable within the groove at its halfway point, close the lid (which is intentionally designed to close tightly), wind up the cord clockwise using the handle, and then extend by simply grabbing the cable by both ends.&nbsp;Update 2023-09-13:&nbsp;Alternative smooth-sided versions of all three sizes have now been added, and also the handle design was slightly adjusted to add a small fillet and chamfer to decrease the bridge distance. Here's a close-up picture of the updated handle on the knurled and smooth-sided versions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_e75ea621224d08.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_68f2b35a6774b8.jpg"></figure>&nbsp;

Portable Cable Organizer / Winder

Management

kogooo

Light and sturdy version of the AMS Disconnect Tool&nbsp;&nbsp;

Bambu AMS Disconnect Tool - topology 

Tools

Mister.D

&nbsp;A minimal Desk Organizer designed for your workspace. I personally like a PLA Marble filament for this model. This Model is for personal use only (non-commercial). DO NOT redistribute the files to anyone else.&nbsp;Those who are interested in product design, prototyping, product presentation and much more could contact me; my bio contains the contact details. Also, those who want to support my work, there is a link to do it:&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/iammister.d" rel="nofollow noopener">https://www.buymeacoffee.com/iammister.d</a>&nbsp;Have a good day, MR.D

Desk Organizer / v1

organizing

capze.

I made this negative object that you can use in fusion 360 to Combine with “Cut” to easily make the t-clip hole

Skadis T-Clip negative hole

Skadis T-Clip

GlennovitS 3D

UPDATE 13. Dec 2023 - Added 12 more sizes! (same lengths, but with a bigger or smaller lid/opening - size 30 and 50. Size 40 is the original) Enjoy!&nbsp;With this simple little print, you can make your bags a lot easier to use in the kitchen! It’s easy to open, pour and close again. Just print and mount on the bag and you are ready to go! No extra hardware needed - all 3D printed. Ready within an hour - almost no reason not to try this ;-)<h2>Overview</h2>The model comes in 18 sizes for now! It's based on the diameter of the lid/opening and the length of the clip. The diameter comes in 3 sizes:<ul><li>30 mm</li><li>40 mm</li><li>50 mm</li></ul>All lengths of the clips in a particular diameter size, uses the same Cylinder and Lid.The clip comes in 6 lengths (currently from XS to XXL). The total length of the different sizes is approx.:<ul><li>XS: 55, 65, 75 mm (depending on the diameter of the lid/openening)</li><li>S: 90 mm</li><li>M: 120 mm</li><li>L: 150 mm</li><li>XL: 180 mm</li><li>XXL: 210 mm</li></ul>For your information, the sizes used on the images are:<ul><li>Pink: 40 - XS</li><li>Yellow: 40 - XL</li><li>Blue: 30 - XS</li></ul>If you have a request for more sizes or other ideas that would make this clip even better, please leave a comment and I’ll get back to you!<figure class="image image_resized image-style-side" style="width:40.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/450294/2023-12-11_bc82b2a49eaeb.gif"></figure><h2>Assembly</h2><ol><li>Cut a hole in the bag (fx. a hole in the corner just big enough to fit the cylinder)</li><li>Hold the Cylinder in the hole with the thread sticking out.</li><li>Mount the Clip around the bag and Cylinder base</li><li>Screw the Lid on</li></ol><h2>Print instructions</h2>It prints easy and can print with default values. There are some tips though to make it better.<ul><li>Supports: No - the print-in-place hinge prints without supports!</li><li>Walls/perimeters: 3-5 - the more walls, the stronger but more filament is used - so test a see what you find the best.</li><li>Infill: The more infil, the stronger it will be. Mostly needed on the longer Clip versions.</li></ul>&nbsp;Happy printing!&nbsp;<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>

Ultimate Bag Clip (with Lid - easy access!)

home accessories 

不相信摩擦力

专为iHOTO小猴电磨打造，更直观更清晰，高度可以合上盖子，全附件分类收纳，打开即用，所见即所得&nbsp;P.S.我永远喜欢由比滨结衣，团子赛高！

打磨头收纳盒（HOTO小猴电磨专用） 

Skadis

jarvizar

3d miniature of Lower Manhattan, NYC!&nbsp;Model created in Blender using the <a target="_blank" href="https://github.com/vvoovv/blosm" rel="nofollow noopener">Blosm</a> addon.&nbsp;&nbsp;Check out my collection of other miniature cities: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/146964" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/146964</a>&nbsp;Midtown Manhattan miniature: <a target="_blank" href="https://makerworld.com/en/models/495851#profileId-410081" rel="nofollow noopener">https://makerworld.com/en/models/495851</a>&nbsp;Check out my <a target="_blank" href="https://makerworld.com/en/models/111838#profileId-119762" rel="nofollow noopener">even larger version of Midtown Manhattan</a> including the East River &amp; Hudson River!&nbsp;<h3>Printing &amp; Slicing Details</h3>&nbsp;This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!&nbsp;Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls (can also enable “Detect Thin Walls”).&nbsp;<h3>Framing Details</h3>&nbsp;This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;Personally I use these cheap frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B0C8HY7YSQ" rel="nofollow noopener">https://www.amazon.com/dp/B0C8HY7YSQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a>&nbsp;I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000106264/design/2023-12-27_7536c6348b762.webp"><figcaption>Gif of the Printable Frame</figcaption></figure>&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;See my <a target="_blank" href="http://patreon.com/jarvizar" rel="nofollow noopener">Patreon</a> for a commercial license, early downloads, polls towards future models, and more!&nbsp;

New York City Lower Manhattan 3D Miniature

decoration

Kampflafer

BOM is the Same as the original, aside from the 8 magnets I used to hold the basket in place when rotating. (Fits my 18g ridgeless VST basket nicely)I used blind holes on my design to give the upper part a cleaner look.The use of a blind hole tap is advised to start ¾ of the thread length, otherwise the part may crack when screwing the M3 Screw in an undersized hole.BOM:<ul><li>16x Magnets 5x2.5mm (2 stacked on top in each hole) </li><li>1x M3x20mm SHCS</li><li>5x M3x12 SHCS</li><li>2x 61813 ZZ / 2Z (65x85x10 mm)</li><li>10x MR63ZZ (3x6x2.5mm)</li><li>10x Acupuncture needle</li></ul>

Bearing based spirographic WDT tool modified

Coffee

Infinity 3D Prints

CLIPS ONTO THE THIN SIDE METAL PART , ON THE RIGHT SIDE OF THE MACHINE SO THE PTFE TUBE DOSENT RUB AGAINST IT AND WEAR OUT PREMATURELY . Can clip onto the upper or lower shelf . And has clearance for the rails and print head &nbsp;Give me a ✰ rating !!! please Like and follow !!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/266087/2023-12-13_4e9696851f53c.gif"></figure>If you like this file please check out my other files !!

P1P P1S X1C SIDE PTFE PROTECTION

Extras

amos

Yes, it’s me again. After drawing the lightsaber file last time, this time I drew a samurai sword. It can also be used with the A1 MINI. Just make sure that the retraction positions are not on the same side. If you have any questions, you can ask me. I will try to help you solve it.-----------------------------------&nbsp;"I have received your questions. I am currently making changes to the parameters and conducting print tests. I hope that after the printing is completed, I can provide you with a smoother katana."&nbsp;-----------------------------------"I adjusted the angle at which the samurai sword extends, so it definitely won't turn into a flying knife. However, I still need everyone to be aware of this aspect when slicing. The areas marked with white dots must absolutely not overlap."&nbsp;&nbsp;like this is ok<img src="https://makerworld.bblmw.com/makerworld/draft/309536/2023-12-25_43c1c301da83b.jpg">&nbsp;&nbsp;this one maybe your knife won't slip<img src="https://makerworld.bblmw.com/makerworld/draft/309536/2023-12-25_ab68cdbaa21c9.jpg">&nbsp;&nbsp;

Samurai sword 

Kids

DutchWorkX3D

This is a christmas edition AMS riser with 12mm (cob) ledstrip option and with HSW sidepanels to the side of the printer to attach whatever you like.