alpowers

tm3d_chris

Included are 2 styles of build plate stops. One, keys into the CR-10 Smart Pro plate, aligning in X and Y. The other, flat design, can use any 310x315 plate and aligns only in Y. Also included, another design that sits lower that requires trimming the magnet. Print the Plate_Stopper_310x315B first and use as a template for trimming the magnet then use the Plate_Stopper_310x315B_magnet_trimmed as final install. If you want to support the designer and a small company, please consider purchasing textured (or smooth PEI) sheets from the <a href="https://www.tinymachines3d.com/" rel="nofollow">Tiny Machines 3D webstore</a> Plates for sale, shipping from Houston, TX <a href="https://www.tinymachines3d.com/products/tm3d-spring-steel-pei-sheets?variant=39680917995638" rel="nofollow">Textured TM Flex</a><a href="https://www.tinymachines3d.com/products/tm3d-spring-steel-pei-sheets?variant=39680918028406" rel="nofollow">Smooth PEI TM Flex</a> (etched "CR-10 Smart Pro) Print Settings ABS or higher temperature material! Strong Settings (similar to Voron standard with 5 top / bottom layers, 4 walls and 40% gyroid infill) Print orientation <img src="https://makerworld.bblmw.com/makerworld/draft/367392/2024-01-07_s8pbg2xrmwei.png">Installation <code>Before installation, print your desired stop blocks</code><ol><li>Lower bed to allow topside clearance to remove OEM locator screws Remove the M3x6 SHCS and save. </li><li>Raise bed to allow underside clearance to install brackets (wider side facing out) and install M3x6 SHCS. </li></ol>&nbsp;

K1 Max Adapter for TM FLEX / CR-10 Smart Pro Plate

k1max

user_3923294070

Please read the full description, this will not be suitable for everyone!&nbsp;I had the AMS loading issues that some people seem to encounter, load unload load unload load unload fail! I used https://makerworld.com/en/models/23655#profileId-26442 but it still failed occasionally, and I was going to try others, but these are all annoying to remove, and they are rigid and could impact the inside of the printer if they are allowed to flop around unconstrained by the PTFE, so…&nbsp;This flexible tapering sock pops on the top of the print head like the others, but it pops on and tugs off HUGELY more easily, and is still secure. I printed it in 30D flexible filament but the more accessible 95A has been reported to work well too. There are three versions, the shorter one without holes was my first attempt, and it was fine, but I felt the longer one with holes induced a more perfect curve of my PTFE tube. The final long one without holes performs best of all in my view, but each of these three need more and more head room!&nbsp;This will NOT BE SUITABLE for you if you have a lid but do not have a riser which adds sufficient extra over head clearance! You probably need a 2cm riser for the long one with holes, and I'm using the long one without holes now, and a 3cm riser is best with that IMO. You may find it work better with the PTFE tube removed from the cable chain clip if your PTFE tube is the standard, stock supplied length. I have replaced my PTFE tube with one a bit longer, which meant I could put it back in the clip, and that's better because it doesn't slop around as the print head moves, and helps maintain the consistency of the PTFE tube into the print head as well.&nbsp;Since using any of these socks, I've not heard the AMS retry a reload once… your mileage may vary of course! Note that the PTFE tube profile when it's in the AMS reload position beds in a bit when you first print as it gets pulled around the print bed. So your absolutely perfect PTFE bend profile may change a bit after you first start… just something I noticed.&nbsp;I used 30D, but that's just what I thought to use from the get go. 95A has now been reported to work too though now. I printed the 30D using entirely stock BBL Generic 95A TPU settings, without a brim, because brims are demonic with TPU, using the engineering plate. It was uncomfortably easy to remove after, but it's a fairly quick print, I did several during design iteration and they all stuck, so seems OK.&nbsp;I was, with a little wriggling able to insert the PTFE tube into the sock from the tapered end, but if you can't do that it will obviously be easy to do from the wide end, you'll just have to detach the PTFE tube at the back of the printer.

Bambu Lab flexible print head PTFE guide

Bambu

izboxo

Don't you hate mess on your table? This will solve one of your problems.&nbsp;MagSafe version. <a target="_blank" href="https://makerworld.com/en/models/229007#profileId-246518" rel="nofollow noopener">Here</a>&nbsp;You can find supported watches inside print profiles.&nbsp;<img src="https://cezarsalat.eu/watch.gif"><img src="https://cezarsalat.eu/watch3.GIF"><img src="https://cezarsalat.eu/mount.GIF">-------------------------------------------What you will need.<ul><li>4x 3x25mm Screw</li><li>Or print Double sided tape mount. And use tape.</li><li>Basic skill in screwing</li></ul>-------------------------------------------&nbsp;

Table Watch Charger Holder

Fun stuff

jarvizar

3d miniature of Las Vegas, Nevada!&nbsp;Includes a colorized version highlighting the Formula 1 circuit!Also includes a small wheel for the “High Roller” ferris wheel.&nbsp;Model created in Blender using the <a target="_blank" href="https://github.com/vvoovv/blosm" rel="nofollow noopener">Blosm</a> addon.&nbsp;&nbsp;Check out my collection of other miniature cities: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/146964" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/146964</a>&nbsp;Collection of F1 Miniatures: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/450282" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/450282</a>&nbsp;<h3>Printing & Slicing Details</h3>&nbsp;This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!&nbsp;Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls (can also enable “Detect Thin Walls”).&nbsp;<h3>Framing Details</h3>&nbsp;This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;Personally I use these cheap frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B0C8HY7YSQ" rel="nofollow noopener">https://www.amazon.com/dp/B0C8HY7YSQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a>&nbsp;I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/551661/2023-12-27_7536c6348b762.webp"><figcaption>Gif of the Printable Frame</figcaption></figure>&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;See my <a target="_blank" href="http://patreon.com/jarvizar" rel="nofollow noopener">Patreon</a> for a commercial license, early downloads, polls towards future models, and more!&nbsp;

Las Vegas 3D Miniature (F1 Edition)

KYZ Design

Gridfinity baseplates completely remodelled from scratch, designed to minimise print time.<ul><li>Lower overall height (top trimmed)</li><li>Flares on the bottom removed</li><li>Smaller radii</li></ul>Designed for PLA and other materials with good first layer adhesion. You may need to add a brim to print with ASA/ABS. Print <a target="_blank" href="https://makerworld.com/en/models/76537" rel="nofollow noopener">these bins</a> next! <img src="https://makerworld.bblmw.com/makerworld/draft/285381/2023-11-28_4d90d07fb6c75.png">&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my other Gridfinity models andcheck out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my Honeycomb Storage Wall models.

Gridfinity Superlight Baseplates

Gridfinity

rubiks

Tray for Apple's Studio Display. Fills the unused space on the stand. Fits in exactly. Have fun printing.

k1max

Bambu

Fun stuff

F1

Gridfinity

MAC