afg841

Cormango

1/10 Mustang Dark Horse Body for DKS-Basic.Chassis modified to fit narrow width. You need to print included rear axle, front bars and steering links.&nbsp;<a target="_blank" href="https://www.printables.com/model/447947-chassis-110-adaptable-dks-basic" rel="nofollow noopener">Chassis Link</a>&nbsp;<figure class="media"><oembed url="https://www.youtube.com/watch?v=mduHhKj2ryw"></oembed></figure>

1/10 Mustang Dark Horse RC Car

coches

Ziemniaczenka

<h3>Features:</h3><ul><li>Place in the back for magsafe metal ring (tested with Baseus) <img class="image_resized" style="width: 25.99%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-06-06_8a7d8f2d612b3.png"></li><li>Case is thicker in the back than the camera bump, so it sits flat on the desk</li><li>Features cutouts for the type-C port, buttons and top microphone, so it should be relatively easy to install</li></ul><h3>Recommended printing settings:</h3><ul><li>Set high count of top/bottom layers to make back solid</li><li>Turn off supports</li><li>Ideally print ‘primary’ part with something little bit flexible with strong layer adhesion to avoid breaking (eg. PLA-CF, PETG)</li></ul><h3>Slicing instructions:</h3>On multicolour capable printers: For 3MF:<ul><li>Add &#39;primary&#39; to slicer</li><li>Click add part → load &#39;secondary&#39; <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_l4wy9jd98cow.png"></li><li>Assign colours for multicolour</li></ul>For STEP:<ul><li>Add model to slicer</li><li>Split → to parts <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-06-06_a5a3937024c9e.png"></li><li>Assign colours for multicolour</li></ul>On other printers:Watch beforehand, goes in detail about whole process:<a target="_blank" href="https://youtu.be/m_SXRGGoTQo" rel="nofollow noopener">https://youtu.be/m_SXRGGoTQo</a>&nbsp;For 3MF:<ul><li>Add &#39;primary&#39; to slicer</li><li>Click add part → load ‘secondary’<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_bmttuheh7l6n.png"></li><li>Split → to objects <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_xjfmmjo2zqh3.png"></li><li>Hide primary<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_4hdch9tzcqu7.png"></li><li>Slice, print, remove skirt (either in slicer beforehand or manually afterwards)</li><li>Hide secondary (remember to turn off supports)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_buk30qnudio3.png"></li><li>Slice and print</li></ul>For STEP:<ul><li>Add model to slicer</li><li>Split → to objects <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_xjfmmjo2zqh3.png"></li><li>Hide primary <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_qdp0vsrhxkbk.png"></li><li>Print, remove skirt (either in slicer or manually)</li><li>Hide secondary (remember to turn off supports)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_c9wyuvee48wk.png"></li><li>Slice and print</li></ul>&nbsp;&nbsp;

Samsung Galaxy S23 hard case

Libb_s

Design upgrade version Laptop stand. No need for AMS.

Laptop stand V2

despacho

KobaRiley

<h2>Cable Tidy for Bambu X & P Series</h2>Got a bit tired of the messy setup on the back of the printer, and designed some cable supports that don't need screws or magnets.Also got a bit carried away and designed a few different versions.&nbsp;The PTFE tube on the right side, that goes to the printer, is free to move back and forth, but stays in the channel.The cables and tubes keep everything in place, but I've added some double sided tape on mine to keep it a bit tidier.<h3>Install</h3>To install the plate, you need to remove the two cables, and the left hand side PTFE tube. Then, remove the PTFE tube at the connector closest to the printer… feed that tube through the hole in the cable tidy plate, and then just reconnect everything.&nbsp;I've had this running on two printers for about 20 prints each, and have had no issues.&nbsp;There are different designs available, from 4, 3, 2 and 1 colour. The 1 colour basic version is by far the fastest to print… The Texas version is my favourite, and looks much better in reality than my awful photos….&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/601192/2024-01-16_432ca9585a8cb.jpg">&nbsp;&nbsp;The cables and tubes can still be removed with the standard little tools that are everywhere on Makerworld, but I've included a couple that fit slightly better with with this plate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/601192/2024-01-16_6a6ab2a212209.png"></figure>&nbsp;This project took several days, and many many test prints. If you like the model, and feel like buying me a coffee, it would be greatly appreciated. <a target="_blank" href="https://ko-fi.com/kobariley" rel="nofollow noopener">https://ko-fi.com/kobariley</a>&nbsp;

coches

s23

despacho

Mod