dog man

Vixvvo 3D

commercial licenses will be accessible through my Patreon page Including every other model designed, 'Vixvvo3D', at the affordable rate of $6 per month. I aim to consistently post and model new content on a weekly basis. Your support on <a target="_blank" href="https://patreon.com/Vixvvo3D" rel="nofollow noopener">https://patreon.com/Vixvvo3D</a> is greatly appreciated!&nbsp;I've noticed that Stanley Cups have become quite popular nowadays. I present to you guys a keychain version of the Stanley Cup that I've made. you can use multiple colors without any issues! (The mf3 file is corrected with the right support for each items)

Stanley Cup Keychain

for mim

3dprintdude

This is a kit card of a glider. It glides very well if weighted properly. I made this because I saw many kit card airplanes that did not fly and wanted to make one. It must be printed with a 0.05 mm layer height. If the glider nose dives then print out the light weight securer. If the airplane flips backward print out the heavy weight securer. (also make sure that the wings are slanted back to provide lift. If they are slanted forward then the fuselage sides need to swap)&nbsp;Some recommendations for this print are.<ul><li>Clean your print bed before printing.</li><li>Print with around 5% infill.</li><li>Do not print to fast. (stay near 200 m/s or less)</li></ul>

Glider kit card (flies great)

for frands

Jayson_3DP_studio

This is a parametrically designed rose elephant Please feel free to share images of your printables on this page, I'd love to see them.Thanks.P.S. If you enjoy my model, feel free to follow!! <a target="_blank" href="https://www.instagram.com/jayson_3dp_studio/" rel="nofollow noopener">https://www.instagram.com/jayson_3dp_studio/</a> All Jayson designs are protected by copyright laws. When you purchase, you do not have the right to sell any digital files or printed models of my designs without my express written consent.To sell them legally, you can get my permission via the following link:<a target="_blank" href="https://www.patreon.com/Jayson3DPstudio" rel="nofollow noopener">https://www.patreon.com/Jayson3DPstudio</a> Please help support the creative work of every 3D artist and never share or sell digital files.<h2>3D PRINTING SETTINGS</h2>*NO suppor *20% filling *PLA works great

rose elephant

for magin

Buffalo3DC

After all the posts about the airless basketball, I figured I’d try to make an airless football. It has a shape that is a little more optimized for 3D printing and isn’t as critical for it to be “bouncy”. A full size regulation football doesn’t fit on the P1P vertically, so I modeled it after a junior size football, just under 10” long. I thought I was going to be first to model this after the airless basketball, but <a target="_blank" href="https://makerworld.com/en/models/203850#profileId-223992" rel="nofollow noopener">thelightspd</a> beat me to it! So I guess that makes this the worlds second airless football!&nbsp;Throws just like a normal football, maybe even easier to get to spiral.&nbsp;PRINT DETAILS:<ul><li>Print vertically as shown in the picture with supports enabled. I used the stock support settings on BambuStudio and they were really easy to remove.</li><li>I suggest adding painted supports on the lacing as these are a bit of an overhang.</li><li>The first 30-40mm should be printed very slowly and/or at a lower layer height to prevent the TPU from curling.</li><li>Material: Overture TPU</li><li>Total print time was ~45 hours and printed it out of overture TPU.</li><li>Printed weight is 375 grams even though BambuStudio showed a weight of 420g (without supports), A professional football weighs between 410 and 460 grams.</li><li>Additional print settings outlined in the print profile</li></ul>

Airless Football - NFL

Infinity 3D Prints

KIDS IPHONE 

XentoBi

&nbsp;Completely automated filament winding system designed for Bambu Lab's P1, X1, X1C, or X1CC 3D Printer.Explore the videos located below to witness its functionality firsthand. Stay informed about any updates related to this model by checking out the latest news.&nbsp;Always ensure bed leveling and flow calibration, especially for gears and axles when using this model! Calibration for Bambu Lab P1 is essential, particularly regarding linear advance.I've uploaded some print suggestions in *.3mf format. Included are 5 print plates for Bambu Lab / Bambu Studio, with a PEI plate at the end of the list. Note: this is not a cold plate, so exercise caution.&nbsp;Upon repeated testing, I encountered the same issue: the 45 mm axle (the driven one) broke! Using 3 walls and 25% infill isn't sufficient.If you haven't printed it yet or experienced a breakage, please print it with:<ul><li>0.16mm Optimal @BBL profile</li><li>5 or more wall loops</li><li>100% infill (sparse infill density)</li><li>Rectilinear (sparse infill pattern - set automatically)</li><li>speed outer wall (slow as possible for more accuracy) e.g. max 60 mm/s</li><li>support (yes) normal (auto)</li></ul> If the stronger printer settings for Axis 45mm are not enough, the you can also print the “Heavy Load” version (see folder “Heavy Load Parts”)Centering discs: If you need a special size, you can decrease or increase the next size in the slicer program. E.g. if you need 51.5 mm, then you can take the 50 mm disc and scale up accordingly before printing. (51.5 / 50 = 1.03, i.e. print 3% larger) Reference print settings for:<ul><li>Winder Spool Holder Main Body</li><li>Donor Spool Holder Frame</li><li>Winder and Donor Right Hand Spool Axle Nut</li><li>Donor Spool Holder Axle without Gear</li><li>all Spooler Centering Discs (50/55/60/65 mm)</li></ul>Settings:<ul><li>0.20mm Standard @BBL X1C Profile +custom settings:</li><li>Wall loops: 3</li><li>Outer wall: 60 mm/s</li><li>Infill 25 %</li><li>if you need support, don't do it at the vertical ball bearing openings support can be used under the filament carriage holder and under the lower ball bearing for the filament sled. (paint it manually)</li></ul>Print settings for:<ul><li>all Gears</li><li>all shafts / axis (except the driven one 45 mm, see above)</li><li>handle or drill adapter parts</li><li>all washers</li><li>and all Filament Guide parts</li></ul>Settings:<ul><li>0.16mm Optimal @BBL X1C</li><li>Wall loops: 3</li><li>Outer wall: 60 mm/s</li><li>Infill 25 %</li><li>no support needed, except: all axis with hexagon </li></ul>please print all parts (gears, axis) horizontally, except:<ul><li>Winder Right Hand Spool Axle with Gear 25 teeth or the Heavy Load version</li><li>Winder and Donor Right Hand Spool Axle Nut</li><li>Gear Worm</li><li>Rotary handle - twist grip - axis</li><li>Rotary handle - twist grip - knob</li><li>Donor Spool Holder Axle without Gear</li></ul>Multiple Prints:<ul><li>all centering disc's 2x per spool</li><li>4 x Washer 3.0 x 8.5 mm</li><li>2 x Gear with 50 teeths</li></ul>Additions parts:<ul><li>7 x 608 bearing</li><li>12-15 cm PTFE tube</li><li>4 x M3 hexagon socket screw (optional, you can also glue the filament guide & sled)</li></ul>Have Fun!&nbsp;&nbsp;The model is available for free download and use. If you still want to invite me for a coffee for my effort, troubles and time (I ran out of filaments a couple of times), you can do it via: <a target="_blank" href="https://paypal.me/mikloskiszely" rel="nofollow noopener">https://paypal.me/mikloskiszely</a>&nbsp;

for mim

for frands

for magin

fun

kk

For my 3-D printer