alex.blem

simon.kohli

Bait-holder for a boat reling2 Part Print for minimum supports, lower part holes are for m5 melt inserts

Tackle Holder

boot

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

crocs

drumandbeard

Ich habe hier einen Sonnenblendenhalter für den ooono CO-CRIVER NO2. Ich habe einige Halter auf Maker World ausprobiert, die mir aber alle nicht zugesagt haben, so habe ich kurzerhand selber eine Halterung erstellt und möchte sie mit euch teilen.&nbsp;Den Halter habe ich mit einem ooono No2 Model von @justhavefun96 erstellt, vielen Dank dafür!&nbsp;Hier sein Profil <a target="_blank" href="https://makerworld.com/en/@justhavefun96" rel="nofollow noopener">https://makerworld.com/en/@justhavefun96</a>&nbsp;Ich habe den Halter selber mit ABS gedruckt. Es wird empfohlen ihn mit PETG, ASA oder ABS zu drucken, weil im Sommer hohe Temperaturen im Auto vorkommen können!&nbsp;Wenn ihr den ooono in den Halter drückt, kann es etwas schwerer sein, ruhig etwas mehr kraft aufwenden, es sollte nichts kaputtgehen, wenn er eingerastet ist, sitzt er ohne Probleme.&nbsp;Viel Spaß mit dem Halter.&nbsp;Wenn es dir gefällt, freue ich mich über eine Bewertung und ein Like.&nbsp;WENN JEMAND EINE ANDERE DICKE BENÖTIGT FÜR DEN HALTER, DANN GERNE MELDEN MIT MAßEN DER SONNENBLENDE UND AUTO HERSTELLER, DANN LEGE ICH EIN NEUES DRUCKPROFIL AN.<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Über eine kleine Unterstützung würde ich mich sehr freuen.</boostcontent></boostme>

ooono CO-DRIVER NO2 Clamp

auto

soukup273

A great idea for a international women&#39;s day gift!&nbsp;a beautiful rose with a stem that is suitable for decoration or as a gift. print the parts separately. print the flower in vase/spiral mode.&nbsp;it is perfect for decorating the table at Christmas dinner, or also for decoration at the approaching New Year&#39;s Eve party! suitable as a decoration for any other party or birthday party :)<h2>!assembly requires glue, ideally instant glue or other plastic glue!</h2>&nbsp;It looks beautiful as a bouquet in combination with my other models!with Tulip:<a target="_blank" href="https://makerworld.com/de/models/94713#profileId-101302" rel="nofollow noopener">https://makerworld.com/de/models/94713#profileId-101302</a>&nbsp;with Rose:<a target="_blank" href="https://makerworld.com/de/models/89698#profileId-96027" rel="nofollow noopener">https://makerworld.com/de/models/89698#profileId-96027</a>&nbsp;with Deffodil:<a target="_blank" href="https://makerworld.com/de/models/94751#profileId-101334" rel="nofollow noopener">https://makerworld.com/de/models/94751#profileId-101334</a>&nbsp;&nbsp;the model is completely a remake from the beginning based on the models created by lytta and Grafit&nbsp;

Beautiful Rose With Stem  - mother’s day Gift

muttertag

Langa__

The letters in the middle are a little more deepened and those on the top edge are a little flatter&nbsp;CHEERS FOR GOOD&nbsp;

Böhse Onkelz Coaster / Böhse Onkelz Untersetzer

untersetzer 

donduce12

Zum schnellen verlegen von Kabeln, reicht aus für 4 Patchkabel ( Netzwerkkabel )Wenn dir mein Modell gefällt, würde ich mich über ein Like freuenIf you like my model, I would be happy about a Like

Kabel Clips - Cable Clips

büro

vasek.vol

A mix of two different boxes.&nbsp;used screws M3x40 and M3x25 for the handlePrinted 0.2 Without supports (except lid with handle) Dimensions approx. 24.5 x 21 different compartment layouts stackable

Tool box

Angelbox

Jaatinen3D

<figure class="media"><div data-oembed-url="https://youtube.com/shorts/W2r6U9RT4QQ"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=W2r6U9RT4QQ"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/W2r6U9RT4QQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;This gift box has a twist lock that when opened, allows the box to collapse when the lid is lifted, revealing the gift inside.&nbsp;After printing the box, carefully pry the hinges loose of any fused spots. You may need to wiggle the box walls for a while to loosen them enough for them to tip and fall easily on their own, especially if you're using a glitter filament. You can also try applying some silicone lubricant to the hinges to help things along.&nbsp;Assembly is simple; push the lock cylinder through the lid from underneath and glue the bow into it on the top side. Careful not to spill the glue and glue everything to the lid! Rotate the lock so the blades point the corners, lift up the box walls and push in the lid. Then rotate the lock 45 degrees to lock the present.&nbsp;The bow and lock have a hole for a string or ribbon if you want to hang it.&nbsp;Don't forget to check out my Instagram and YouTube channel for more interesting projects!&nbsp;<a target="_blank" href="https://www.instagram.com/jaatinen3d" rel="nofollow noopener">https://www.instagram.com/jaatinen3d</a><a target="_blank" href="https://www.youtube.com/@Jaatinen3D" rel="nofollow noopener">https://www.youtube.com/@Jaatinen3D</a>

Collapsing Gift Box

Geschenk Boxen 

mediaman3d

This is a remix of SoftFever's middle dry box AND SamH's remix for AMS that works with round hygrometers that are available on Amazon in the US. Use the top from SamH's remix project.Updated 10-20 Added indent to back wall for AMS roller fix from 'dietrich'. Also added the original lid for convenience.Updated 10-18: Included the internal supports for the round cutout that were not attached to the original export (Sorry!).Updated 10-17: Added ‘vents’ for proper airflow to the sensors. &nbsp;Light support may be needed for the top of the front circle. Support is NOT needed internally as there is a built-in support structure.<a href="https://www.amazon.com/WNJ-Mini-Thermometer-Hygrometer-Temperature/dp/B097PW5C94" rel="nofollow">https://www.amazon.com/WNJ-Mini-Thermometer-Hygrometer-Temperature/dp/B097PW5C94</a>&nbsp;