al.gauthier

Zach

I absolutely loved this Vintage Radio case for the HomePod mini and I wanted to make one for the HomePod mini I have in the bathroom. That one needed to be mounted on the wall, however. So I took the file into Tinkercad and added screw holes in the back and removed the feet. With the first iteration, I realized that having the back pressed against the wall left the sound coming out of the speakers sounding muffled since the front grille was the only place sound could come out. So I added small 2mm hole grilles on both sides as well as a 2mm line grille in the bottom. This allows the stereo sound to come out much better.I included the original grille and ring cover in the file as well as some fake knobs I designed that fit into the holes in the front grille. I find the knobs make it look much more like the original Braun radio. &nbsp;Make sure to print the case with hybrid tree supports so the piece in the middle is supported well, the grilles on the sides won&#39;t need support.&nbsp;I printed mine with Bambulab Matte dark blue PLA for the case, silk black for the front grille, and silk copper for the embellishment pieces.

Wall Mountable Vintage HomePod mini Case

Other Projects

star treck

LowRunneR

I got this nice Wera Bitcheck in their advent calendar 2016.As I use it on a regular basis, I want to keep it stored nicely, so I designed a holder for it. The holder can be mounted by screws or you can use double sided tape (this way I mounted it in my IKEA Pax).It is desigend to take out each bit seperatley, or to hold the bitcheck flat, so it wont be as big and just stores the bitcheck.As filament I would recommend to print it in PETG, because PLA is to brittle. In my case I used Olefin Compound from <a href="https://www.bavaria-filaments.com/product-page/bavafil-olefin-black" rel="nofollow">Bavaria Filaments</a> which I like a lot.Unfortunaltey I dont have any other bitchecks, to make different sizes, but if you have it, you can send me the measurements, I will make another design, or you can make a remix of my design.

Wera Bitcheck 12 Holder

Tools

mikolaj.mazik

I&#39;m a student. If you like my work, please consider leaving a small donation, it will help me create more and more interesting models!<a target="_blank" href="https://ko-fi.com/mikolajmazik" rel="nofollow noopener">https://ko-fi.com/mikolajmazik</a>&nbsp;This time I decided to make a Catherpillar 745 Articulated Truck. Modeling took me about three days, another two days to print individual parts. It is best to print them from regular pla as it will allow you to remove the supports relatively easily. Parts should be glued using plastic glue. Comments and suggestions for further models will be very welcome!

Catherpillar 745 Articulated mining Truck

Models

Willi 3D

SpoolCore is a container designed for using the Bambulab RFID chips on third-party spools, as well as to increase the weight of the spool and regulate the humidity within the AMS of the X- and P-series through silica.&nbsp;The RFID holder is about enjoying the convenience of Bambulab spools, also from other manufacturers, and not having to choose a material or color on the printer by hand.&nbsp;In my experience, most filaments from other manufacturers can also work great with the Bambulab profiles. But of course other profiles can still be selected for printing. So you don&#39;t have to worry about your printer working with the wrong settings.&nbsp;Spools with a width of 60-75 mm and a diameter of 50-75 mm can be used. For larger spool inner diameters, the three wings ensure that the core is positioned correctly.&nbsp;An inner cover specifically for silica storage, ensures that it cannot escape when the spools are changed. My filaments are either in the AMS or in an airtight box. Therefore the silica remains in the core. If you don&#39;t store your rolls outside the printer in airtight boxes or bags, or at least paper boxes, I recommend not using silica and leaving the container empty or filling it with something else.&nbsp;When changing the spool, the RFID can be changed to a different material or color. I recommend printing the RFID holder in the color of the RFID chip so that it is easy to see from the outside which values are stored on the chip. The RFID holder is inserted from the inside out.The unused RFID holders can be conveniently stored in a <a target="_blank" href="https://makerworld.com/en/models/434542#profileId-339375" rel="nofollow noopener">holder</a> until they are needed again.<figure class="image image_resized image-style-align-center" style="width: 50%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000434531/design/2024-04-19_wfbty79bvbti.jpg"></figure>&nbsp;&nbsp;<a target="_blank" href="https://www.printables.com/model/889944-spoolcore-for-brands" rel="nofollow noopener">SpoolCore customized for specific brands for club members.</a>&nbsp; Process:<ul><li>The Bambulab RFID chips must be cut off at the bend and inserted or glued (not needet) into the RFID holder.</li><li>These RFID holders can then be clipped into the spool core from the inside out.</li><li>The core is filled with silica. If it&#39;s just about weight, something else can be used. e.g. AAA batteries.</li><li>The core is then inserted into the coil and screwed together.</li><li>In the last step, the core is inserted into the spool and screwed to the counterpart.</li></ul><figure class="image image_resized" style="width: 50%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000434531/design/2024-04-19_vg0uwqpqfvny.jpg"></figure>Spools/manufacturers tested for compatibility so far.<ul><li>Prusament (Prusa)</li><li>eSun spools</li><li>Sunlu plastic spools</li><li>Polymaker plastic spools</li><li>BambuLab spools</li></ul>

SpoolCore

RFID Tags

kerngebiet

Simple wall mount for <a href="https://amzn.to/3PWNDEO" rel="nofollow">Wera Tool-Check Plus</a>. The design is based on the idea from <a href="https://www.printables.com/model/177537-wera-tool-check-plus-without-belt-clip-wall-holder" rel="nofollow">@ksuszka_192195</a>, but is completely redone. This model should fit all versions of the Tool-Check plus, with and without latch on the back. Also, this model will let the Tool-Check rest on the body instead of the nuts. Its easy to print without any supports.

Wera Tool-Check Plus wall holder

mounts

Pork3D

We have created a Chess Set that is great for travel and families. All the colours are 3D printed separately, so you do not need an AMS type system. (This also cuts down on printing time) First print the boards and then a set each of the inserts and chess pieces. Insert the little squares into the holes in the chess board. It's recommended that you slip these in on an angle (they should lock in). If they are too loose, you may glue them in, but if your printer is pretty well tuned this won't be an issue. Have fun! Print Settings Concentric Top & Bottom Surfaces for aesthetic reasons No Supports

Chess Set by Pork3D.com

Game

yzffish

给x1c准备的配套工具箱，使用卡扣组合，整体尺寸约 16x16x25cm，内部空间约 14x14.5x16cm&nbsp;***卷帘门请使用韧性材料打印！***&nbsp;----------------------------------------------------------------------------------------------------------------------------------------3/9更新： ·稍微提高了销钉的强度 ·略微加宽了卷帘门的宽度和把手长度 ----------------------------------------------------------------------------------------------------------------------------------------6/15更新： ·把插销部分单独分出来了，避免和侧板一起打印时出现失误·添加了一个医药箱标志&nbsp;<img class="image_resized" style="width: 31.57%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149674/design/2024-06-15_33803765d93ae.png">&nbsp;&nbsp;

卷帘门工具箱 Shutter Toolbox

Drawers

Mister.D

&nbsp;A Decorative 3D Panel (2 sizes) to be placed on any planar surface with double side tape. A modular structure can be created with this panel with any combination of colors and positions (vertical, horizontal, diagonal), so place them the way you like the best. This Model is for personal use only (non-commercial). DO NOT redistribute the files to anyone else.&nbsp;Those who are interested in product design, prototyping, product presentation and much more could contact me; my bio contains the contact details. Also, those who want to support my work, there is a link to do it:&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/iammister.d" rel="nofollow noopener">https://www.buymeacoffee.com/iammister.d</a>&nbsp;Have a good day, MR.D

Decorative 3D Panel 

Wall Panels

Zurlingo-3D

<h2>Modular Slidey Storage Pod</h2>&nbsp;<figure class="image image_resized" style="width:60.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/491186/2024-01-31_1c4c74b291f9f.gif"></figure>&nbsp;Features:<ul><li>3 Shelves For Storage</li><li>1 Full Pod Prints In Under 9 Hours</li><li>Easy Assembly</li><li>Sliding Door</li><li>Stylish Design</li><li>Great For Use As A First Aid/Medicine Cabinet</li><li>Can Be Colour Coded For Different Purposes</li><li>Perfect For 3D Printer Parts, Adaptors, Cables, SD Cards, USB Sticks, Scrapers And Anything Else That Will Fit!</li><li>Easy Removal From The Wall For Simple Loading, Unloading And Organizing</li><li>Modular System That Can Be Mounted In Horizontal And Vertical Rows (Single And Double Mounts Included)</li><li>Strong And Reliable Storage Solution</li><li>Can Be Printed On An A1 Mini</li><li>3 Different Labelled Doors Included - ‘Parts’, ‘Tools’, ‘First Aid’</li></ul>&nbsp;Assembly:<ul><li>Glue the ‘Shelves’, ‘Side Left’ and ‘Side Right’ together.</li><li>You only need to add glue to the very edge of the shelves and then seat them in the slots in each side piece.</li><li>Once the glue is dry, insert the door through the grooves that are cut in the door channel</li><li>Ensure the door is in the correct orientation as it slides in from back to front</li><li>Slide the door all the way round its channel until it meets the stop at the front</li><li>Insert the 2 small stop pieces to close off the door channel. This is optional as once mounted on the wall, the door handle acts as a stop.</li></ul>Assembly should take no more than 5 minutes.&nbsp;During assembly you must ensure all edges of the shelves are seated into their corresponding slots. If they are not all the way in then the sliding door will not function correctly.&nbsp;Add some lubricant to the slots that the door slides in, for a smooth motion. I use silicone grease and it works great.&nbsp;Tip: You can make the pod any width you like! - You just need to scale the shelves and the door up or down in Bambu studio.<ul><li>To do this, scale both parts in the X-axis only and ensure the door is always 2.9mm narrower than the shelves.</li></ul>&nbsp;This design is the first version I have made of this concept - If you have any issues or recommendations for edits or additions, please leave a comment or message me! I'm open to constructive feedback to make this as good as it can be :) - It would also be good to add some additional features that users may want to see in the future. I already have some ideas, but would love to hear what you think too!&nbsp;Thanks for looking!&nbsp;Please share your makes with this one! - I had a fun time designing this and am very happy with how it turned out.&nbsp;Also, please rate and review your printing experience :) - It helps my designs get seen by more people :P

Modular Slidey Storage Pod - Wall Mounted For Tools/Parts/Medicine 

Boxes / Containers

sipura

Hii everyone, &nbsp;Since my wife is crazy about sunglasses, and she has them all over the house, I had to find a solution where we can put them in one place.I made this model, which can stand alone or can be stuck to a wall or some piece of furniture with double-sided tape.&nbsp;Simple and interesting design, very easy to print.The front side is slightly rounded to make the model look nicer&nbsp;I printed it with P1S, basic Bambu settings, and some generic filament.&nbsp;&nbsp;In the picture below, you can see the internal dimensions, and thus check whether your glasses fit.Width 156mm inner, and heights 56,7mm inner.The thickness of the stand is 2 mm<figure class="image image_resized" style="width:73.22%;"><img src="https://makerworld.bblmw.com/makerworld/draft/556704/2024-02-19_a5d2eeb730e52.png"></figure>&nbsp;Also, if your model is too big or maybe too small, you can adjust it to your needs in the slicer. Enjoy printing, and I hope it solves your glasses problem like mine. :D&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/556704/2024-02-19_a5743d8f59658.png" alt="Ikona Potvrdila zajednica"></figure>

Sunglasses holder

Glasses

braga3dprint

Illuminate your space with the sleek and modern Tesla logo lightbox. Crafted with precision and attention to detail, this 3D model captures the essence of Tesla's innovative spirit. The iconic T emblem is meticulously designed, and the lightbox offers a contemporary and stylish addition to any Tesla enthusiast's collection. Whether you're a fan of electric vehicles or appreciate cutting-edge design, this Tesla logo lightbox is a perfect way to showcase your admiration for one of the leading brands in sustainable technology. Drive your space into the future with the brilliance of the Tesla logo. ⚡🚗 If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign! WARNING!- remove purge line at the beginning of the print, it may interfere, specially with bigger prints! <img src="https://i.redd.it/uo838wkstaqa1.png">&nbsp;&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - remove purge line at the beginning of the print! - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=OsA23WCxRtg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OsA23WCxRtg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Assembly video: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;How to print without AMS:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=RUSTGxOOS_U&t=102s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/RUSTGxOOS_U?start=102" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Tesla Lightbox LED Lamp

Lights

Foxwood

Hello ! Welcome you to Foxwood. Inspired by the traditional Japanese woodworking technique known as Kumiko, I wanted to merge its intricate beauty with the art of lighting.&nbsp;I am keen to design more lighting creations in the future, please following my page for updates and insights into upcoming designs.&nbsp;Kumiko, a traditional Japanese woodworking technique, serves as a profound source of inspiration for artisans and designers worldwide. Rooted in centuries-old craftsmanship, Kumiko involves meticulously assembling small wooden pieces to form intricate geometric patterns, creating visually stunning and structurally sound works of art. This technique, characterized by its precision and attention to detail, embodies the essence of Japanese aesthetics and cultural heritage. Beyond its inherent beauty, Kumiko holds deeper significance, symbolizing patience, perseverance, and a deep connection to nature.&nbsp;The Kumiko lamp incorporates the Bambu Lab LED Kit 001. The lamp&#39;s base discreetly houses a compartment for the LED kit. The installation process is straightforward, insert the LED into the base and rotate the locking cap into place the design does not require glue or fixings&nbsp;I have Small, Medium and large versions on my page. The Small and Medium also have A1 mini print profiles.&nbsp;Its easy to print base in colours the suit your style and easy to swap the shade out in the future.&nbsp;The lamp has been designed without the need for support structures.&nbsp;Print profile Kumiko Shade and base - has the the kumiko pattern and the base to hold the LED kitPrint Profile Shade vase mode - Has teh internal shade that must be printed in vase mode to work.&nbsp;I plan to make a smaller version in futrue to fit the A1 Minis build height.&nbsp;I printed them in Basic Bambu PLA<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please consider giving me a Boost if you like my work !</boostcontent></boostme>Files on my Maker World are free to download and print for yourself. However If you would like to support my work please check out my <a target="_blank" href="https://patreon.com/Foxwood769?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" rel="nofollow noopener">Patreon</a> page that has multiple support tiers including commercial licences to sell prints of my designs where ever you like!&nbsp;

Japanese Kumiko Lamp - Medium -LED KIT 001-Foxwood

Plants

3D Depot

Print the “black” “white” and “red” files in the same print if you are using an ams. import them into bambu studio together for best printing. back plate will print with one color change being white. Hole in the side of the light box should fit most RGB strips. included are two tabs that fit into the hole of the the light strip for a tighter fit.

Snoopy Heart Light Box

Signs

<h2>Bed Cleaner 🧼</h2>USE BEFORE PRINTING LED LIGHT BOXES OR ANYTHING THAT REQURES A CLEAN FIRST LAYER! Prints one layer on whole bed to clean it before printing LED Light Boxes. SEE BEFORE AND AFTER IN MODEL PICTURES Use provided print profile! It has increased flow to clean textured build plates better! Check out my Light Boxes on my profile!Commercial Use for Light Boxes:<a target="_blank" href="https://ko-fi.com/l3dmodels" rel="nofollow noopener">https://ko-fi.com/l3dmodels</a>

Bed Cleaner - L3D

Bed Cleaner

3DSlash

This is a hexagon wall light. It can be designed individually as the individual hexagons are plugged together with a connector.An ordinary LED strip can be used as a light source. Very nice projects can also be implemented with WLED. You can enter WLED as a keyword on YouTube.Here you can find an example (The video is not in front of me and only serves as an example) <a target="_blank" href="https://www.youtube.com/watch?v=vuUvfX1_Klk&t=16s" rel="nofollow noopener">https://www.youtube.com/watch?v=vuUvfX1_Klk&t=16s</a>&nbsp;If someone prints it, I would be happy to see photos of your projects in the comments&nbsp;

Hexagon Wall Light

Hex Tiles for Wall

jarvizar

3d miniature of Vancouver, British Columbia, Canada!&nbsp;&nbsp;Check out my collection of other Canadian miniatures: <a target="_blank" href="https://makerworld.com/en/@jarvizar/collections/766210" rel="nofollow noopener">https://makerworld.com/en/@jarvizar/collections/766210</a>&nbsp;Collection of all my miniatures: <a target="_blank" href="https://makerworld.com/en/@jarvizar/collections/146964" rel="nofollow noopener">https://makerworld.com/en/@jarvizar/collections/146964</a>&nbsp;&nbsp;Model created in Blender using data primarily from the <a target="_blank" href="https://github.com/vvoovv/blosm" rel="nofollow noopener">Blosm</a> addon.&nbsp;<h3>Slicing & Printing Details</h3>&nbsp;This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!&nbsp;Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls. Can also try enabling “Detect Thin Walls”.&nbsp;The included “Designer Profile” should have the above settings pre-applied and is ready to slice & print!&nbsp;<h3>Framing Details</h3>&nbsp;This model measures almost exactly 6.8in by 4.8in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;Personally I use these cheap frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B0C8HY7YSQ" rel="nofollow noopener">https://www.amazon.com/dp/B0C8HY7YSQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a>&nbsp;I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/723549/2023-12-22_a8fa62e18a031.webp"><figcaption>Gif of the Printable Frame</figcaption></figure>&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;See my <a target="_blank" href="http://patreon.com/jarvizar" rel="nofollow noopener">Patreon</a> for a commercial license, early downloads, polls towards future models, and more!&nbsp;

Vancouver BC Canada 3D Miniature

Maps

The 3D model of a lightbox featuring the Apple logo is a sleek and modern homage to the renowned tech giant. This elegantly designed lightbox embodies the minimalist aesthetic that Apple is known for, making it a perfect addition to any Apple enthusiast&#39;s space. With its captivating design, this lightbox lets you showcase your appreciation for Apple&#39;s innovative products and design philosophy. Illuminate your room with a soft, inviting glow that highlights the iconic Apple logo. Whether you&#39;re a dedicated Apple user or simply admire their cutting-edge approach, this lightbox is a stylish way to express your tech-savvy tastes. 🍎💡 If you don&#39;t have or don&#39;t want to install LED&#39;s you can just glue the parts together and have an awesome sign!&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&amp;gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - remove purge line at the beginning of the print! - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED&#39;s the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED&#39;s become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I&#39;ve been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=OsA23WCxRtg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OsA23WCxRtg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Assembly video: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Apple Logo Lightbox LED Lamp

Light Box

Dr.  J. Ma

<h2>Description</h2>Same as a regular "blade-less fan", this aerospike fan uses the principle below to move air: blowing a thin high-velocity smooth airflow from a continuous slot across the surface of the tube or toroid. The difference is that the aerospike can generate a narrow and high velocity stream of air, but the regular blade-less is focus on moving large volume of air. More info and original designs &nbsp;The fan size is 5015, you can just buy one, no need to strip down from your machine.. &nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/329538/rich_content/e5f1f975-1ae7-4d15-8c24-6c8efef96b1e/model-fan-animation2.gif"></figure><figure class="image"></figure><figure class="image"><img src="https://media.printables.com/media/prints/329538/rich_content/270db279-cb80-4ac9-81a3-b1e9c3e3618d/thumbs/cover/800x299/png/sim-acceleration-channel.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/329538/rich_content/da21de2d-0787-4667-b230-fd19e2e03cb1/thumbs/cover/800x338/png/sim-highpress-chamber.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/329538/rich_content/734bdbb2-82be-4fe0-98c5-edef9ed3edac/thumbs/cover/800x506/png/model-digrams.webp"></figure>&nbsp;&nbsp;YouTube video: &nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=unEyynxkuZI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/unEyynxkuZI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;For more simulation and building detail, please go to my GitHub pages: https://github.com/majianjia/aerospikes-fan

Aerospike fan powered by Bambu Lab X1's toolhead turbine

Electronics Projects

Imaginarydave

This is a 2nd Stage air filtration system based on thrutheframe's excellent <a target="_blank" href="https://makerworld.com/en/models/12786#profileId-24358" rel="nofollow noopener">Bento box recirculating air filter</a>. the goal of course being to remove as many VOC's as possible. This is a add on to the full bento box to add extra filtration. &nbsp;FEATURES<ul><li>Second stage air filtration that creates a sort of negative pressure system to filter air that comes out the chamber fan opening.<ul><li>I torture tested this by running it without the bento box on. on a 2 hour print with ABS the smell in the room became perceptible after about an hour, indicating that it was doing a pretty good job on its own. When used with the bento box even my wifes Burton Guster level supersniffer was not bothered.</li></ul></li><li>Air bypass ensures it is not pulling excessive air out of the chamber causing loss of heat retention</li><li>Can be turned off when not needed.</li><li>When off it works as an excellent exhuast muffler.</li><li>AMS compatible</li></ul>WHAT YOU WILL NEED<ul><li>I intentionally didn't include the hepa and carbon portions of the original bento box. Support thrutheframe and print plates 2,3,4 from his print profile. you can remove the model for the fans as I had to modify it to run the wires.</li><li>M3 x4mm (4.2mm OD) threaded inserts - I used ones from this kit: <a target="_blank" href="https://amzn.to/3RKi3KF" rel="nofollow noopener">https://amzn.to/3RKi3KF</a> alternatively if you arent in a rush. <a target="_blank" href="https://www.aliexpress.us/item/3256804693330073.html?spm=a2g0o.order_list.order_list_main.4.74321802075kPI&gatewayAdapt=glo2usa" rel="nofollow noopener">Aliexpress </a>is a super cheap source of getting lots of threaded inserts. you can never have enough for 3d printing.</li><li>m3x25mm cap head screws x4, and m3x6mm scews x8 - this kit is excellent if you dont already have them: <a target="_blank" href="https://amzn.to/3H2TMKM" rel="nofollow noopener">https://amzn.to/3H2TMKM</a></li><li>SPST round rocker switch <a target="_blank" href="https://amzn.to/3tsDHuR" rel="nofollow noopener">https://amzn.to/3tsDHuR</a> </li><li>5.5x2.1mm DC power jack <a target="_blank" href="https://amzn.to/3S1UH4k" rel="nofollow noopener">https://amzn.to/3S1UH4k</a> </li><li>40x20 fan - <a target="_blank" href="https://amzn.to/48C0y6w" rel="nofollow noopener">https://amzn.to/48C0y6w</a> <ul><li>If you're starting fresh, The ideal solution IMO is to print the <a target="_blank" href="https://makerworld.com/en/models/21259#profileId-19505" rel="nofollow noopener">DK riser </a>and the <a target="_blank" href="https://makerworld.com/en/models/12786#profileId-24358" rel="nofollow noopener">original bento box</a>, buy 2 sets of the 24 V fans from the link above, a set of <a target="_blank" href="https://www.amazon.com/gp/product/B0BCV91L1P/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">24 V COB LEDs</a> , <a target="_blank" href="https://amzn.to/3vj0k5n" rel="nofollow noopener">a 3 way splitter</a>, and then you can run both bento box fan sets, and the LEDs off the power supply from the LEDs</li><li>Pay attention to voltage. If you have a bento box, pick one that matches your bento box and use a splitter like one of these: <a target="_blank" href="https://amzn.to/41Fp4AW" rel="nofollow noopener">https://amzn.to/41Fp4AW</a>. If you did the 5V modification to run 5V fans in the original bento box you could tap that same power source and run 5V fans. </li><li>40x28 fans are an option. I found the 40x20 adequate, but here is a link if you would like more power. <a target="_blank" href="https://amzn.to/3RKqFAU" rel="nofollow noopener">https://amzn.to/3RKqFAU</a></li></ul></li><li>Power supply - I keep a massive supply of these from old electronics and can always find one to work, but if you need to you could buy one of these. <a target="_blank" href="https://amzn.to/3H2jKxX" rel="nofollow noopener">https://amzn.to/3H2jKxX</a> **some links are affiliate links. </li></ul>&nbsp;

Bento Smoke stack - Stage 2 air filtration

Filtration

100prznt

<h2>Ball-bearing filament spool roller based on the design of the Bambulab P1 and X1</h2>With its simple design and anthracite color scheme, the Bambu Lab P1S is a real eye-catcher. A standard spool roller doesn't really fit in here. For this reason, I designed this roller and took up the design of the P1S/X1C. The result is a simple roller that doesn't need to hide behind the printer in respect of design.&nbsp;<h3>Key features</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/554977/2024-02-19_f356e8b0294fa.png"></figure><ul><li>For spools up to 75 mm wide (also suitable for all Prusament spools) and ~200 mm diameter</li><li>Ball bearing rollers with spool guides</li><li>Cut-outs for rubber buffers, which provide a safe standing position</li><li>Separate frame provides a perfect finish and offers the option of a high-gloss look ( similar to the glass cover of the printer)</li><li>Easy to print, with very low support</li></ul><h3>Bill of material</h3>In addition to the printed parts, at least 4 size 688 ball bearings are required. The shafts for mounting the rollers can be printed (I recommend at least PETG) or made from threaded rods. Rubber buffers can be fitted to the bottom of the roller to give it a secure stand, this is of course optional.<ul><li>4 pcs. Ball bearing 688 (8 x 16 x 5 mm)</li><li>2 pcs. M8 * 89 mm threaded rod (or simlar shafts)</li><li>4 pcs. rubber buffers 10 x 3 mm</li></ul><h3>Assembly</h3>The rollers consist of 3 parts, which are pressed into each other, I use a vice. The tolerances are very tight, so it is important that the printer and the filament profile are well calibrated. If there are still problems, I can provide alternative models with larger tolerances.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/554977/2024-02-19_930d9e278866e.png"><figcaption>Roll assembly</figcaption></figure>&nbsp;Rubber buffers can be glued to the bottom of the base.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/554977/2024-02-19_479fbfb775771.png"><figcaption>Cut-outs for rubber buffer</figcaption></figure>&nbsp;

Filament spool roller based on the design of  P1S and X1C.

Spools or Accessories

&nbsp;A wall key holder that mounts with double-sided adhesive tape. This Model is for personal use only (non-commercial). DO NOT redistribute the files to anyone else.&nbsp;Those who are interested in product design, prototyping, product presentation and much more could contact me; my bio contains the contact details. Also, those who want to support my work, there is a link to do it:&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/iammister.d" rel="nofollow noopener">https://www.buymeacoffee.com/iammister.d</a>&nbsp;Have a good day, MR.D

Bird / Key Holder For Wall

Keys

Hello,&nbsp;We made a new bowl model.Simply design, fits everywhere and you can use them for lot of things.&nbsp;I use them for holding my car keys in one place.&nbsp;Both plates are printed with PLA.&nbsp;After you have printed both pieces, turn the bowl upside down and carefully insert the tripod legs into it. There is no need for glue, it holds perfectly even like this.&nbsp;Enjoy printing and feel free to post pictures of your finished prints in the comments.

Bowl tripod

Bowls

Siganberg

I really like the Festool Systainer and I have a few of them. The only thing not to like is that they are very expensive. &nbsp;This is a similar design to Festool Systainer Mini but more printable with minimal support requirements. &nbsp;Features:<ul><li>Stackable</li><li>250x171x71mm dimension. Will fit with Bambu printers except A1.</li><li>No glue or screws needed. Every part should snap together. </li><li>No carrying handle to maximize space inside. </li><li>Slot for sliding labels. </li><li>You can create your own foam insert or custom 3D print organizer/divider inside. </li></ul>&nbsp;Printing instruction:&nbsp;<ul><li>The body and lid require support. For the body, add support where the feet will be attached and also for the latch lock. For the lid, just add support for the feet alignment area. 0.28mm resolution is suggested</li><li>All other parts can be printed without support, the ideal resolution is 0.20mm. </li></ul>&nbsp;<h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://paypal.me/FMarasigan" rel="nofollow noopener">paypal</a> or <a target="_blank" href="https://www.buymeacoffee.com/siganberg" rel="nofollow noopener">buymecoffee</a>

Simple Printable Mini Systainer (Beta)

Festool

techam

After searching way to long to find a well organized and easy to print storage solution for my BambuLab accessories, I gave up and made my own.&nbsp;Hence, the BambuBox was born.&nbsp;This Box takes up to five BambuLab X1/P1 Hotends, even fully assembled, with dedicated storage for the wires.&nbsp;Also there is a Drawer on the bottom to store Nozzle wipers, Filamentcutters, AMS-Shafts, Screws etc.The Divider is removable and I also uploaded a STEP-file of it for easy modification.&nbsp;The whole Model is very easy to make: No Supports, No Brim, just: download, print, assemble.&nbsp;And all you need is:<ul><li>6pc ISO7380 M3x6</li><li>2pc ISO4762 M3x25 or M3x30 both work.</li></ul>Have fun!

The BambuBox - the easy printable Hotend and Accessories storage solution.

P1S Mods

K2_Kevin

DONT FORGET: <a target="_blank" href="https://makerworld.com/en/models/142513" rel="nofollow noopener">Download the Pro Streamer Essentials Bundle.</a>&nbsp;<h2>The &#34;Pro Streamer&#34; for Stream Deck Classic MK1 and MK2</h2>System to keep your control panel in order! Each holder works with various components (Stream Decks, Phone holder, or other designed accessories) that set into place using Gridfinity!<h4>Instructions:</h4><ol><li>Print the holders for your Stream Deck(s)</li><li>Download the Pro Streamer Essentials files that include the Interface Plates, Dowels and Gridfinity Baseplates.</li><li>Interface Plate(s) - slide your Stream Deck Holder in place (Designed to be VERY tight, but pops off easily from the back)</li><li>Gridfinity Baseplates</li></ol>&nbsp;NOTE: Think ahead... how do you want to fit together your control panel. Overlapping Interface plates help keep multiple holders together. Im still working on more interface plate sizes/designs. I use 3x5, 3x6 Minimal Baseplates for my Control Panel.&nbsp;I&#39;ve tried to design each additional holder to fit Interface Plates and Gridfinity Baseplates.This is a project, and you can choose your own adventure based on your needs! Remix and design your own panels using any of these designs. I included a BLANK Holder in another download you can scale to fill gaps or modify to suit you needs.&nbsp;Hard to install plates?  If you find the Interface Plates are difficult to slide on, no problem, feel free to use a hammer.  Some may slide on nice and easy, while others need a little convincing.&nbsp;&nbsp;&nbsp;&nbsp;The Pro Streamer Control Panel is Inspired by flight sim cockpit design by mhwlng on printables. The Stream Deck +/XL design has been designed to fit snug on Interface plates and sized to fit gridfinity baseplates together.

Pro Streamer MK1/MK2 (15 Button Stream Deck) 

Office Projects

AU3D

<h3>Key Advantages</h3><ul><li>Only 7g of filament per ring.</li><li>Compatible spool brand name impressed.</li><li>Rounded contour helps with traction, avoids pullback errors and stabilizes the spool inside the AMS.</li><li>Rounded contour lowers the chance of damaging plastic storage bags.</li><li>Flat variant for full AMS compatibility (see tolerance and compatibility section)</li><li>200mm diameter variant for slightly bigger spools (199mm is the standard size)</li></ul><h3>Description</h3>This isn&#39;t merely a typical cardboard spool adapter. By decreasing its contact area by approximately 50-60% compared to standard adapters, it significantly enhances contact pressure. Consider it akin to winter tires on a car, which generally require higher pressure to minimize their contact area with the ground. Additionally, its rounded edges help stablizing the Spool inside the AMS and minimize the likelihood of damaging plastic vacuum bags. The adapter is not only lightweight, weighing a mere 7 grams of filament, but it is also reusable and easily attaches in the same manner as conventional adapters.&nbsp;This adapter has proven to be a game-changer, eliminating the need for other AMS modifications that claim to address retraction and entanglement issues. Remarkably, I’ve found that spool weights are no longer necessary. However, as with any solution, individual results may vary. Happy printing!<h3>Tolerances</h3>Compared to plastic spools, cardboard spools are more vulnerable to various external factors, such as moisture, temperature fluctuations, and variations in the production process (up to +/-2mm). Consequently, you may encounter slight variations in the fit, which can range from slightly looser to tighter. In extreme cases, the spool adapter may not fit at all. In these scenarios, you can make the necessary adjustments to the model&#39;s scale using the Bambu Slicer for both the X and Y axes. Ensure that you uncheck the &#34;uniform scale&#34; option before proceeding. If your spool&#39;s diameter exceeds the default setting, consider increasing the scale by 1%. Conversely, if your spool&#39;s diameter is smaller, reduce the scale by 1%, and your setup should be ready for use.<h3>Compatibilty</h3>eSun Cardboard Spools tend to be on the larger side of the spectrum. While they can fit without an adapter, when paired with the rounded adapter, they surpass Bambu Labs’ specifications. Consequently, users have a couple of options to address this:<ul><li>AMS Lid Spacer: Utilizing a spacer for the lid can accommodate the larger spools effectively.</li><li>Custom Backside Rollers: Alternatively, consider implementing custom backside rollers specifically designed to support these larger rolls.</li><li>For a straightforward solution, leaving the lid open (or at least not locking it) provides ample room for the spool.</li></ul>For individuals who prefer not to alter their AMS and wish to close the lid, I have incorporated a nearly flat variant that aligns with Bambu Labs’ specifications.<h3>Printing</h3>When it comes to printing, you should produce two adapters for each cardboard spool. It is advisable to steer clear of materials that exhibit low friction, such as Silk-PLA, to ensure optimal performance. Most of the time I use Standard PLA.<h3>Other Filament Brands</h3>This adapter is available for other brand&#39;s cardboard spools (<a target="_blank" href="https://makerworld.com/en/@AU3D/collections/565167" rel="nofollow noopener">Link to Collection</a>):<ul><li><a target="_blank" href="https://makerworld.com/en/models/251717" rel="nofollow noopener">3DGenius</a></li><li><a target="_blank" href="https://makerworld.com/en/models/233956" rel="nofollow noopener">3DHojor</a></li><li><a target="_blank" href="https://makerworld.com/en/models/197741" rel="nofollow noopener">Aceaddity</a></li><li><a target="_blank" href="https://makerworld.com/en/models/197938" rel="nofollow noopener">ANYCUBIC</a></li><li><a target="_blank" href="https://makerworld.com/en/models/197839" rel="nofollow noopener">ATA</a></li><li><a target="_blank" href="https://makerworld.com/en/models/377775" rel="nofollow noopener">Bblife</a></li><li><a target="_blank" href="https://makerworld.com/en/models/254552" rel="nofollow noopener">Colorful</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192941" rel="nofollow noopener">Comgrow</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192757" rel="nofollow noopener">Creality</a></li><li><a target="_blank" href="https://makerworld.com/en/models/253694" rel="nofollow noopener">CUIEED</a></li><li><a target="_blank" href="https://makerworld.com/en/models/251342" rel="nofollow noopener">Dikale</a></li><li><a target="_blank" href="https://makerworld.com/en/models/376740" rel="nofollow noopener">DO3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/237701" rel="nofollow noopener">Duramic 3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/180213" rel="nofollow noopener">Elegoo</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194714" rel="nofollow noopener">ENISINA</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175447" rel="nofollow noopener">Eryone</a> / <a target="_blank" href="https://makerworld.com/en/models/372282" rel="nofollow noopener">Eryone 2024+</a></li><li><a target="_blank" href="https://makerworld.com/en/models/180253" rel="nofollow noopener">eSun</a></li><li><a target="_blank" href="https://makerworld.com/en/models/246501" rel="nofollow noopener">Filafarm</a></li><li><a target="_blank" href="https://makerworld.com/en/models/377992" rel="nofollow noopener">Firos</a></li><li><a target="_blank" href="https://makerworld.com/en/models/376304" rel="nofollow noopener">Flashforge</a></li><li><a target="_blank" href="https://makerworld.com/en/models/196175" rel="nofollow noopener">FormFutura</a></li><li><a target="_blank" href="https://makerworld.com/en/models/375168" rel="nofollow noopener">GNVTNTP</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192804" rel="nofollow noopener">GratKit</a></li><li><a target="_blank" href="https://makerworld.com/en/models/246162" rel="nofollow noopener">Grauts</a></li><li><a target="_blank" href="https://makerworld.com/en/models/253905" rel="nofollow noopener">Inland</a></li><li><a target="_blank" href="https://makerworld.com/en/models/254313" rel="nofollow noopener">IWEColor</a></li><li><a target="_blank" href="https://makerworld.com/en/models/192773" rel="nofollow noopener">JAMG HE Conjure</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175622" rel="nofollow noopener">Jayo</a></li><li><a target="_blank" href="https://makerworld.com/en/models/176924" rel="nofollow noopener">Kexcelled</a></li><li><a target="_blank" href="https://makerworld.com/en/models/375526" rel="nofollow noopener">Kinluot</a></li><li><a target="_blank" href="https://makerworld.com/en/models/249610" rel="nofollow noopener">Kretrum</a></li><li><a target="_blank" href="https://makerworld.com/en/models/252594" rel="nofollow noopener">Lovoon</a></li><li><a target="_blank" href="https://makerworld.com/en/models/376013" rel="nofollow noopener">Mchyi</a></li><li><a target="_blank" href="https://makerworld.com/en/models/245976" rel="nofollow noopener">Meltbro</a></li><li><a target="_blank" href="https://makerworld.com/en/models/253497" rel="nofollow noopener">MKOEM</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194179" rel="nofollow noopener">Ninetec</a></li><li><a target="_blank" href="https://makerworld.com/en/models/245837" rel="nofollow noopener">OEM Mika3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/175704" rel="nofollow noopener">Overture</a></li><li><a target="_blank" href="https://makerworld.com/en/models/237378" rel="nofollow noopener">OVV3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/177047" rel="nofollow noopener">Polymaker</a></li><li><a target="_blank" href="https://makerworld.com/en/models/254827" rel="nofollow noopener">Protopasta</a></li><li><a target="_blank" href="https://makerworld.com/en/models/239790" rel="nofollow noopener">R3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/238604" rel="nofollow noopener">Raise3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/206466" rel="nofollow noopener">Redline Filament</a></li><li><a target="_blank" href="https://makerworld.com/en/models/234098" rel="nofollow noopener">Reprapper</a></li><li><a target="_blank" href="https://makerworld.com/en/models/193658" rel="nofollow noopener">Prindano</a></li><li><a target="_blank" href="https://makerworld.com/en/models/196488" rel="nofollow noopener">SainSmart</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194367" rel="nofollow noopener">Sovol</a></li><li><a target="_blank" href="https://makerworld.com/en/models/242422" rel="nofollow noopener">Spectrum</a></li><li><a target="_blank" href="https://makerworld.com/en/models/235861" rel="nofollow noopener">Sunlu Elite Series</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194269" rel="nofollow noopener">Tinmorry</a></li><li><a target="_blank" href="https://makerworld.com/en/models/206360" rel="nofollow noopener">Tronxy</a></li><li><a target="_blank" href="https://makerworld.com/en/models/238095" rel="nofollow noopener">TTYT3D</a></li><li><a target="_blank" href="https://makerworld.com/en/models/194520" rel="nofollow noopener">Two Trees</a></li><li><a target="_blank" href="https://makerworld.com/en/models/236118" rel="nofollow noopener">Yousu</a></li><li><a target="_blank" href="https://makerworld.com/en/models/234380" rel="nofollow noopener">YOYI YOYI</a></li></ul>