代达罗斯

Brad - FTBT 3D

I wanted a way to store my 80 piece Bambu Lab filament swatch samples in a clever and satisfying way. Most of the raising holders only held 40, raised swatches up uniformly, and used bearings. I wanted something that could be fully printed, no bearings. And this design raises the swatches up, then abruptly drops them down so you can really see the one in the front and grab it easily.You don't need Bambu Lab swatches for this, I've included a modeled up blank you can use and customize or label on your own.Print Settings:<ul><li>Top Layer Height: 0.20mm</li><li>Bottom Layer Height: adaptive or 0.10mm (for smooth ramp) </li><li>Top & Bottom Surface: Concentric</li><li>Print top upside down</li><li>Use Arachne wall generator for best results</li><li>As designed it will only turn clockwise, mirror base to turn counterclockwise</li></ul>For best turning:<ul><li>Sand the ramp smooth with 220 grit sandpaper if needed</li><li>Put rubber feet on the bottom so the base won't spin while turning the top</li></ul>

Spinning Filament Swatch Display - Lifts Swatches

想打印

Filionix3D

Take shape of your dragon by moving each joint and create your magical creature. Make sure to have a well-calibrated printer for better accuracy. Enjoy discovering the magic of dragons with this unique puzzle!Note: Make sure to print everything at a resolution between 0.16 / 0.12&nbsp;Feel free to print Arachna the robot spider, discover it on my profile: <a target="_blank" href="https://makerworld.com/en/@Filionix3D" rel="nofollow noopener">https://makerworld.com/en/@Filionix3D</a>

Robot Dragon Articulated Puzzle

小摆件

安装所需1：4颗螺纹长度为10MM的M3螺丝，4颗M3螺母2: 需要在X1CC或者P1SC寻找多余螺丝替换ams lite的原本的螺丝才能安装。特别提醒：A1mini不能独立完成这个打印任务。安装视频可以在B站寻找（嘟吉）进行观看。&nbsp;&nbsp;

A1mini ams lite FILAMENT DRY BOX

收纳

Murata

<figure class="media"><oembed url="https://www.youtube.com/watch?v=eRsKkqWW3Uk"></oembed></figure>&nbsp;This is a double axle dump truck with pup trailer. I designed it to accompany my <a target="_blank" href="https://makerworld.com/en/models/18311" rel="nofollow noopener">tracked excavator</a> model. It is intended to be tough enough to play with as a toy, not just a shelf model.&nbsp;The tires and mudflaps can be printed in TPU as well as PLA. The TPU print profile has the tires slightly undersized for better retention.&nbsp;<h3>Build Notes</h3>Everything assembles with snap fits, but if you want the wheels to really spin freely, a drop of mineral oil or a smidge of petroleum jelly on each axle before assembly will help.&nbsp;<h3>History</h3>2024-06-24: Added a hinge to the trailer so it doesn&#39;t come unhooked as easily2024-05-19: Added scarf seams, added TPU profile, fixed dump body geometry error at pivot2024-05-06: Added brim to dump gate, more piston clearance, modelled roll-over tarp cover2024-04-18: Updated out of date dump body STLs to match 3mf files2023-12-04: Minor changes to truck and trailer chassis pistons to reduce sticking2023-11-19: Increased retention on wheels. Let me know if you have issues with them being too loose or taking a lot of force to install.

Dump Truck with Pup Trailer

玩具

holonda3d

I designed this guide because I was afraid the cable might get tangled,Keeps cable out of harm&#39;s way, I wish you fun with it and would like feedback, use at your own risk, I have it on my printers for months without any problems, it just does its job.

想打印

小摆件

收纳

玩具

A1工具