adam.bevington

Amao Chan

A hungry polar bear fails to reach the fish held in the naughty seal’s mouth. Everytime the polar bear tries to catch the fish, the seal will sink back into the water and tease the poor, hungry polar bear.&nbsp;In fact, polar bears are indeed always famished because of the worsening condition of the planet due to global warming, and the North Arctic has become warmer than usual. On top of this, the melting of the ice has shrunk the polar bears’ living area, and made it difficult for them to hunt. There are many signs telling us that polar bears and the polar ice caps are slowly disappearing.&nbsp;The design, Polar Bear with Seal, was a paper DIY for the magazine Young Scientist. I really liked the concept, so I redesigned it into STL files. I hope this piece of art can convey a sense of beauty both in motion and stillness. While I was designing this, I put a lot of effort into observing the subtle changes in the movements of polar bears. In order to make this design work via 3d printing, I adjusted every component’s angle. Very few parts require supporting material.&nbsp;Ultimately, this art piece took me the longest time to design, and it’s the most complex one I have ever shared. I am extremely happy with the outcome!&nbsp;<a target="_blank" href="https://youtu.be/2ga2XGnS2OA" rel="nofollow noopener">https://youtu.be/2ga2XGnS2OA</a> <a target="_blank" href="https://youtu.be/UWyBoHDMF1g" rel="nofollow noopener">https://youtu.be/UWyBoHDMF1g</a>&nbsp;Thanks to SpiderMaker for sponsoring the creation of this work.<a target="_blank" href="https://www.amazon.com/SPIDER-MAKER-Matte-Printer-Filament/dp/B07HX9DY9F" rel="nofollow noopener">https://www.amazon.com/SPIDER-MAKER-Matte-Printer-Filament/dp/B07HX9DY9F</a>&nbsp;Material used SpiderMaker PLA Matte Paper White/Matte Iron blue/Matte Steel Blue/Matte Orchid Purple/Matte Peacock Green/Matte Coal Black&nbsp;Print suggestions 1.Layer height 0.2mm 2.Low down the flow to 90%or 95%. 3.Add oil on moveable parts&nbsp;<a target="_blank" href="https://amaochan.work/" rel="nofollow noopener">https://amaochan.work/</a> <a target="_blank" href="https://www.facebook.com/paperworkers/" rel="nofollow noopener">https://www.facebook.com/paperworkers/</a>&nbsp;北極熊與海豹調皮小海豹從浮冰的縫隙中探出頭來，用嘴中叼的魚逗弄著北極熊；當飢餓的北極熊揮掌搶魚時，海豹總是快一步的把頭縮回海面下，看樣子吃不到魚的北極熊要餓肚子了。 事實上，北極熊真的是處於挨餓狀態中！全球暖化，北極氣溫不斷上升，造成北極的海洋冰層融化，使得北極熊的活動範圍縮小、食物變少、獵食變得困難，許多跡像顯示北極熊正和北極海冰同時消失中！&nbsp;《北極熊與海豹》這個作品，原本是我為《科學少年》雜誌所設計紙製DIY作品；我很喜歡這個有趣的構想，所以把它重新設計為stl的版本。我希望這個作品在動與靜都能呈現美感，所以在設計時，特別注意北極熊在姿態上的微妙變化。為了配合3d列印工具的特性，調整了每個零件的角度；只有很少數的零件，在列印時需要設定支撐。《北極熊與海豹》是我目前分享的作品中，耗費時間最多、設計難度最高，但最後的設計成果，我很滿意！&nbsp;感謝 SpiderMaker 織造者 贊助本作品之創作&nbsp;使用材料 SpiderMaker PLA 消光白色、消光鐵灰藍色、消光鋼青色、消光蘭紫色、消光暗綠色、消光黑&nbsp;製作建議 1.層高0.2mm 2.流量降到90-95 3.組裝完成後在移動零件加些潤滑油。

Polar Bear with Seal (automata)

presents 

3dMaker.Idea

Style: This project features a rugged, modular housing for GoPro, models 12, 11, 10, and 9, optimized for adventure enthusiasts. Featuring a sleek and practical design, the case incorporates a customizable logo, offering a touch of uniqueness and style.&nbsp;Advantages: The case provides superior protection for your GoPro, with dedicated compartments for microSD, adapters, batteries, and various accessories. The well-organized structure ensures that all items are safe and easily accessible, maximizing convenience during transport.&nbsp;Realization: Available in PLA, PETG, or ideally ABS/ASA, this case is designed to be robust and durable. 3D printing the two main parts takes about 4 hours, demonstrating optimal efficiency in the manufacturing process without compromising quality.&nbsp;For an advanced version, check out the <a target="_blank" href="https://makerworld.com/en/models/182720#profileId-201254" rel="nofollow noopener">V2 custom project</a>.&nbsp;ITALIAN TRANSLATE  Stile: Questo progetto presenta una custodia robusta e modulare per GoPro, modelli 12, 11, 10 e 9, ottimizzata per gli appassionati di avventure. Caratterizzata da un design elegante e pratico, la custodia incorpora un logo personalizzabile, offrendo un tocco di unicità e stile.Vantaggi: La custodia garantisce una protezione superiore per la tua GoPro, con compartimenti dedicati per microSD, adattatori, batterie e vari accessori. La struttura ben organizzata assicura che tutti gli elementi siano al sicuro e facilmente accessibili, massimizzando la comodità durante il trasporto.Realizzazione: Realizzabile in PLA, PETG, o idealmente in ABS/ASA, questa custodia è stata concepita per essere robusta e durevole. La stampa 3D delle due parti principali richiede circa 4 ore, dimostrando un'ottimale efficienza nel processo di produzione senza compromettere la qualità.&nbsp;Per una versione evoluta, visita il <a target="_blank" href="https://makerworld.com/en/models/182720#profileId-201254" rel="nofollow noopener">progetto V2 custom</a>.

Rugged Box GoPro 12-11-10-9 with LOGO

GoPro 

kitchen

office

ByteSlinger

I designed this display stand for FPV style drones.&nbsp;Buy online:If you don't have a 3D printer but would like one of these, I now sell them on my Etsy store here: <a target="_blank" href="https://www.etsy.com/uk/listing/1411458192" rel="nofollow noopener">https://www.etsy.com/uk/listing/1411458192</a>&nbsp;Whilst I built this from scratch, there are a couple already on here that I took inspiration from, but I found them either unbalanced or that they require a crazy amount of support material to print.&nbsp;This doesn't require any support material, and it can hold even larger drones (see pictured my Chimera 7 HD) at a cool looking 25 degree angle very securely.&nbsp;In the pictures you can see it holds a wide range of drones, from my Bumblebee, through the Nazgul5, all the way up to the Chimera 7!If you'd like to check if it will fit your quad in it's default scale, the two prongs are 55mm apart (centre to centre) and are 5mm wide.For most drones, you'll rest your quad with the front arms hooking behind the prongs. If however you have something more like the bumblebee, look underneath your quad and find a pair of holes that will fit them (check there are no cables, components or propellers that the prongs could damage before placing).&nbsp;<figure class="image image_resized" style="width:24.68%;"><a href="https://www.buymeacoffee.com/joshforwood" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/288427/2023-11-16_b48ac1ef59a22.webp"></a></figure>If you like this design, you can tip me via 'Buy Me a Coffee' here: <a target="_blank" href="https://www.buymeacoffee.com/JoshForwood" rel="nofollow noopener">https://www.buymeacoffee.com/JoshForwood</a> Alternatively, if you enjoy my free designs and videos on <a target="_blank" href="https://www.youtube.com/@3DRevolution" rel="nofollow noopener">my YouTube channel</a>, please support me and my channel via Patreon: <a href="www.patreon.com/3DRevolution" rel="nofollow">www.patreon.com/3DRevolution</a> You'll also gain access to the exclusive 3D Revolution discord community, and can get early or exclusive access to additional content including STLs, custom designs, and more!&nbsp;I printed this in PLA at 40% infill with Gyroid infill. You could probably get away with lower infill (especially for smaller/lighter quads), but as I was going to be using heavier quads on it I didn't want to risk it. Even if you do lower the infill for most of it, I'd recommend using a decent amount of infill on the prongs as this is what will be holding back the drone from sliding off so you don't want them to be brittle. Mine at 40% feels rock solid!<h3>Print Settings</h3>Printer Brand:PrusaPrinter: I3 MK3SRafts:NoSupports: NoResolution:0.2Infill: 40%Filament: Filamentive PLA Black Notes:&nbsp;Unlike other stands on here that either require support material or to be printed in multiple pieces, this is a single print in-place stand with no need for any support material.I printed this in PLA at 40% infill with Gyroid infill. You could probably get away with lower infill (especially for smaller/lighter quads), but as I was going to be using heavier quads on it I didn't want to risk it. Even if you do lower the infill for most of it, I'd recommend using a decent amount of infill on the prongs as this is what will be holding back the drone from sliding off so you don't want them to be brittle. Mine at 40% feels rock solid!<h3>Custom Section</h3>This item is not for commercial use!This item is for printing for personal use only. If you wish to use it for another purpose, please feel free to pop me a message. This has been used as prizes in FPV competitions etc which is great and people have been wonderful at getting in contact.Please note, this design is not by "Eric Carrender Garrido" and he has no rights to it's commercial use. He's trying to sell prints of this but please do not encourage him. If you want this item and don't have a printer of your own, pop me a message and I'll see how I can help.&nbsp;&nbsp;&nbsp;

FPV Racing Drone Stand (No Supports Needed)

drone