acan595123

erinfezell

<div><h1>Summary</h1><div>I work in the tech industry and this meme/comic, much like everyone else, has become a visual representation of the chaos we are subjected to on the daily. I had sought out to make something special for my coworkers and decided I would make my own take on this piece. Here are the details of the changes I made as I wanted it to more closely resemble the comic...EDITS MADE TO DOG: <ul><li>Added smile</li><li>Changed nose some</li><li>Added the black strip to his hat</li><li>Changed his eye shape</li><li>Changed his arms, making them more natural</li><li>Added hands to rest in his legs like in the comic (also helps with better printing)</li></ul>NEW ADDS:<ul><li>Created a new base with cut-outs of the individual pieces, which allows for pressure fitting of printed pieces</li><li>Created new speech bubble that is the same shape and font used within the original comic</li><li>Added more flames and changed composition for more visual impact</li></ul>I printed this with a Bambu Labs X1 Carbon printer, using a single AMS (allows for four color prints). There were changes that I made to the slicer, but I won't get into those details as those items will vary greatly on experience/slicers used. I have multiple files that will allow for MMU (multi-material) prints. Note that you may need to separate shells within your slicer to do so. FILAMENT NOTES: I used PLA for all pieces (details and links below); also used clear PET-G as the top layer on supports for the flames which allowed for very beautiful bottom layers. <ul><li>BASE: Black Glitter PLA</li><li>Speech bubble: Natural (clear), Black, and White PLA</li><li>Chair/Table/Hat: Brown PLA</li><li>Mug: Stone Marble PLA</li><li>Dog: Tan, Black, White PLA</li><li>Flames: Yellow and Orange PLA and clear PET-G for top layer of supports</li></ul>ADDITIONAL PRINTING POINTERS: <ul><li>Speech Bubble: In order to achieve the stick to remain clear and the speech bubble outline to not lose it's shape, I had to actually leave the pieces separated within the Bambu Labs slicer but place them slightly on top of one another. So I have included the separate speech bubble pieces in the event other slicers have the same experience. </li><li>Fire was printed laying down, with the above note of using PET-G as the top layer on the support. </li></ul>Please respect the Creative Commons licensing, as this is not approved to be sold in any format. ASSEMBLY NOTES: <ul><li>The various flames are inserted via one corner first then pushed and rocked down via the other side in order to pressure fit into their respective places.</li><li>I used Gorilla Glue Super Glue to permanently adhere the pieces in place AFTER test fitment. Placed just a couple of drops/small line in each respective hole within the base as well as a small dot on the bottom of the mug to adhere it to the table. </li></ul>Links for filament: <ul><li>Black Glitter PLA: <a href="https://a.co/d/bqyutzh" rel="nofollow">https://a.co/d/bqyutzh</a></li><li>Yellow PLA: <a href="https://a.co/d/4QwmVSE" rel="nofollow">https://a.co/d/4QwmVSE</a></li><li>Orange PLA: <a href="https://a.co/d/6pmjSfa" rel="nofollow">https://a.co/d/6pmjSfa</a></li><li>Brown PLA: <a href="https://a.co/d/c11qDMp" rel="nofollow">https://a.co/d/c11qDMp</a></li><li>Tan PLA: <a href="https://a.co/d/jajHU5W" rel="nofollow">https://a.co/d/jajHU5W</a></li><li>Stone PLA: <a href="https://a.co/d/eHBaeEX" rel="nofollow">https://a.co/d/eHBaeEX</a></li></ul></div><h1>Print Settings</h1>Printer: <div>Bambu Labs X1 Carbon</div> <pre><code> Rafts: <div>No</div></code></pre> Supports: <div>Yes</div> <pre><code> Infill: <div>20</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=See+Comments+PLA" target="_blank" rel="nofollow noopener"> See Comments PLA </a><pre><code> See comments</code></pre></div>

This is Fine Dog Remix

gifts

BuzzEye

Sign for bathroom created in the aesthetic of "The Office" TV show logo.&nbsp;Print in black&white with included print profile or download RAW file.&nbsp;Post your makes! Follow for more!

The Bathroom sign - The Office TV Series

home

QwermMakes

Micro Picatinny Cable Guide by Qwerm A simple, low profile, clip-on picatinny cable guide. Designed for use with 3.5mm cables. Insert the cable into the hook side and hold up against the rail, then snap on the rounded side.  &nbsp;Print Orientation: Print on it's side.  &nbsp;Recommended Print Settings: Layer Height: 0.2mm Wall Line Count: 4 Infill Density: 30%+ Support: No Fuzzy Skin: No

Micro Picatinny Cable Guide

Pulsar Designs

Figuring out the right text size to use in your design can be difficult, especially considering your printer has physical limitations, too.&nbsp;Print this text size guide to test your printer's print quality for a variety of font sizes, embossed and recessed, and to have a handy physical guide on hand the next time you include text in your designs!&nbsp;Gladly upload a picture of your results. I'd be curious to see how a 0.2mm or a 0.6mm nozzle performs, since I only had a 0.4mm nozzle to try it with.&nbsp;Notes: <ul><li>For text to print cleanly, I highly recommend the Arachne wall generator as opposed to the classic wall generator. </li><li>If you want to try this test with other fonts, I included the .f3d file under ‘raw model files’ so you can modify it to your liking!</li></ul>&nbsp;Enjoy!

Text Size Guide/Tester

calibration

Wing-Art

U P D A T E 3 1 . 3 . 2 0 2 4 - T H I S    V E R S I O N    I S    O U T D A T E D !&nbsp;<a target="_blank" href="https://makerworld.com/en/models/406101#profileId-307995" rel="nofollow noopener">!!! PLEASE DOWNLOAD VERSION 2.0 with QUICKLOCK MOUNT HERE !!!</a>  __________&nbsp; Universal Kitchen Dispenser for Pickle Jars (80 mm Diameter) &amp; Mason Jars&nbsp;This print file contains the design for a universally applicable kitchen dispenser, specifically developed for use with pickle jars with a diameter of 80 mm or Mason Jars.  Excellent for storing and easily dispensing various ingredients such as:  <ul><li>Coffee</li><li>Cereal</li><li>Rice</li><li>Cat food</li><li>Pasta</li><li>Lentis</li></ul>…or many other things! Furthermore, a Jar for self-printing is included in the Pickle Version!&nbsp;Design Features:<ul><li>Flap with Rubber Ring: At the bottom of the dispenser, there is a flap operated by a cleverly integrated rubber ring mechanism.</li><li>Versatile Use: The dispenser is ideal for a variety of dry foods such as coffee beans, cereal, rice, pasta, lentis and other dry ingredients.</li><li>Text Plates: Additionally, the kitchen dispenser can be equipped with text plates for labeling.</li></ul>&nbsp;Note - There are two Versions of the Dispenser:   <ul><li>Pickle Jar Version for 80mm Diameter</li><li>Mason Jar Version (als requested in the comments)  </li></ul>The printable Jars: Please note that the printable jars are only compatible with the &#39;Pickle&#39; version of the Dispenser!<ul><li>Sizes: Two options - 800ml and 2500ml for self-printing.</li><li>Print Profiles: Independent profiles for Vase Mode (translucent prints) and normal prints (solid and robust).</li><li>If you need a Lid: Available <a target="_blank" href="https://makerworld.com/de/models/96064#profileId-102443" rel="nofollow noopener">HERE</a>.</li></ul>&nbsp;It is highly recommended to print the included test thread before printing the main parts - except you print the included Jar (Pickle Version)! This is to ensure that the thread fits correctly and that the jar is compatible with the dispenser.<a target="_blank" href="https://all3dp.com/2/food-safe-filament-brands-compared/" rel="nofollow noopener">HERE</a> you can find the Best Food-Safe PLA Filaments of 2023. Special bonuses:&nbsp;Additional doors:<ul><li>10mm handle (Standard size)</li><li>20mm handle</li><li>30mm handle</li></ul>Adapter:<ul><li>Pickle-Jar Version to → Wide Mouth Mason Jar (86mm)</li></ul> Just take a look at my other Kitchen Tools here:<ul><li><a target="_blank" href="https://makerworld.com/de/models/96064#profileId-102436" rel="nofollow noopener">Printable Jars (compatible with this Kitchen Dispenser!)</a></li><li><a target="_blank" href="https://makerworld.com/de/models/96912#profileId-103376" rel="nofollow noopener">Orange Peeler Citrus Pro</a></li><li><a target="_blank" href="https://makerworld.com/de/models/99747#profileId-106354" rel="nofollow noopener">EGG-citing Nest - the classic Egg Cup</a></li><li><a target="_blank" href="https://makerworld.com/de/models/115132#profileId-123776" rel="nofollow noopener">Bottle-Can Dispenser</a></li><li><a target="_blank" href="https://makerworld.com/de/models/100260#profileId-106926" rel="nofollow noopener">Knife Cat Napkin Holder</a></li><li><a target="_blank" href="https://makerworld.com/de/models/109348#profileId-116818" rel="nofollow noopener">Hexagon Napkiin Holder</a></li></ul>

Kitchen Dispenser for Jars (included!)

kitchen 

tellus1019

Important Information Do not use PLA filament for this part as it will be exposed to high temperatures. Use heat-resistant filaments such as PETG, ABS, or ASA.&nbsp;This fan duct improves filament cooling for P1S and P1P. Air is blown from 360 degrees to eliminate uneven filament cooling and improve printing quality.&nbsp;The original model had a problem with some parts interfering with the front cover. I solved that problem and prepared several models to accommodate various sizes of magnets. I also have a model without holes that can be modified to allow you to attach your own favorite magnets. Let's download it!&nbsp;&nbsp;What you need<ul><li>Two magnets 　Compatible with 6x1mm or 5x1mm or 4x1mm or 3x1mm</li><li>Screw not required 　Screws used for the front cover can be used.</li></ul>&nbsp;Assembly Instructions<ol><li>Remove front cover Remove all screws to remove the fan and ducts attached to the front cover. Two of the four screws attached to the duct will be diverted to the 360 Fan Flow Duct. <img src="https://makerworld.bblmw.com/makerworld/draft/133880/2023-10-31_a81dae5b7bd218.jpeg"> </li><li>Cut out the ducts The duct is welded to the front cover. Use a knife to cut them out. It will come off with a snap if you make a little tooth. Be brave! <img src="https://makerworld.bblmw.com/makerworld/draft/133880/2023-10-31_604f4acfedf778.jpeg"> </li><li>Screw the top and bottom of the duct parts together Use two screws removed from the front cover to secure the top and bottom of the duct parts. There is one screw hole on the upper side and one on the lower side. </li><li>Attach magnet to duct Attach a hand-held magnet to the duct. The printing profile supports 3 to 6 mm magnets. Choose the profile you like and print. The hole size is just right. You can fix it by pushing it in with pliers. <img src="https://makerworld.bblmw.com/makerworld/draft/133880/2023-10-31_e0e63a299bc688.jpeg"> All that remains is to insert it into the front cover and fix it in place as shown in the photo above. Completed! </li><li>Put the hot end through the duct and then fit the cover It cannot be fitted from the front as before. Put the hot end through the duct and then fit the cover. <img src="https://makerworld.bblmw.com/makerworld/draft/133880/2023-10-31_854f127073e228.jpeg"></li></ol>

P1S/P1P 360 Fan Flow Duct - Compatible with multiple magnet sizes

upgrades

ShakaStudio

This model has been carefully designed to look great with 8 colors. It is ok if you do not have the exact same color, any closest shade will still look amazing.&nbsp;This is an easy to print 8 color Filament painting to add to your other Halloween decor.Only filament swaps! No AMS necessary.&nbsp;This does not need an AMS to print, but it does make it easier.This can be printed with 1 AMS as well : When starting the print select 5th color : slot A1, 6th color : slot A2, 7th color : slot A3, 8th color : slot A4 When you are done printing the a specific slot, swap out the color.&nbsp;If you have an AMS, print directly from the provided print profile.If you don't have an AMS, open and slice in the Bambu Studio app and add pauses at the provided layer heights for filament swaps.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA+ JAYO Black Transmission Distance: 0.8 PLA+ IIID Max Navy Blue Transmission Distance: 4 PLA+ Sainsmart Matte Red Transmission Distance: 1 PLA+ IIID Max Light Blue Transmission Distance: 2.6 PLA+ 3DHoJor Yellow Transmission Distance: 4.4 PLA+ Creality Fl Orange Transmission Distance: 8 PLA+ IIID Max Tan Transmission Distance: 4 PLA+ IIID Max White Transmission Distance: 7Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Navy Blue At layer #12 (1.04mm) swap to Matte Red At layer #14 (1.2mm) swap to Light Blue At layer #20 (1.68mm) swap to Yellow At layer #22 (1.84mm) swap to Fl Orange At layer #24 (2mm) swap to Tan At layer #27 (2.24mm) swap to White for the rest.

gifts

home

2a

calibration

kitchen

upgrades

HUE