aaron.carey428

Theodor

Rose cookie cutter

REQUESTS

Geek Genius Collective

Texas LightboxOriginal example printed with Bambu basic PLA black, white, red and blue. As always be sure to heat up your hotend to clean any old filament that is stuck to the nozzle before sending the print. This will help keep color wisps to a minimum.The back has a negative cube included in the objects that you can move and scale as you need for your LED installation.Enjoy and Happy Printing!

Texas Lightbox

Lone Star Heroes Outdoors

Matthew

My mom wanted a way to dispense paper plates that got them off of her counter so I started searching for the existing options. I was inspired by the pop-a-plate but I wanted a single piece. It is designed for 9" paper plates but it parametric so you can adjust it for size, capacity, etc. Works great in my RV.There are two versions. The one I printed is a bit larger and is meant for the plates to load from the top. But it was super easy to bend the plates a little bit and load them from the bottom so I designed a slightly smaller one with no opening at the top.I went on to design a similar dispenser for bowls: www.printables.com/model/417359/I used 3x 1" long #8 screws.&nbsp;

Undermount Paper Plate Dispenser

Meagan

masks/suits

Jeff Smith

There are a number of sunshades for various Lowrance Hook Reveal models, but I really wasn't satisfied with them for one reason or another. Some of my dislikes were multiple pieces, flimsy looking, prevented angle adjustment, and most important to me was being able to positively attach it to the Lowrance. I took inspiration from a number of ideas folks had, most notably Lowrance Hook 5 Reveal Sun Cover by orlovkem. I liked the rounded front, didn't like the shelf, not sure what the text meant, but overall, I thought the slip down over the top idea was solid. I also needed this for the Reveal 7, not the 5. I wanted to be able to positively attach the sunshade so there are tabs that go between the angle adjust screws and the Hook 7 and can be adjusted while the sunshade is on the device. Borrowed the Lowrance logo from their website and added that to the top.

Lowrance Hook 7 Reveal Sunshade

Boat

3DMN

If you appreciate my work, give it a like, and if you love it, consider buying me a coffee to show your support! <a target="_blank" href="https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG" rel="nofollow noopener">https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG</a>&nbsp;&nbsp;Check out my other Hogwarts model: <a target="_blank" href="https://makerworld.com/en/models/134009#profileId-145435" rel="nofollow noopener">https://makerworld.com/en/models/134009#profileId-145435</a> &nbsp;&nbsp;Step into the enchanting world of Harry Potter with our meticulously crafted Hogwarts Castle model! This exquisite replica captures the magic of J.K. Rowling&#39;s wizarding world with precision and attention to detail, making it a must-have for every Potterhead.&nbsp;Standing at an impressive x200 y185 z104, this Hogwarts model is a true testament to the grandeur of the iconic wizarding school. Every turret, tower, and spire has been faithfully recreated, allowing you to bring the mystical charm of the castle into your own space.&nbsp;Whether you&#39;re a collector seeking the centerpiece of your Harry Potter memorabilia or a fan looking to add a touch of magic to your home, Immerse yourself in the wizarding realm and marvel at the intricacies of the magical world with this stunning representation.&nbsp;&nbsp;

Harry Potter Hogwarts

Kayla

keeeal

Inspired by <a target="_blank" href="https://www.jpl.nasa.gov/news/space-fabric-links-fashion-and-engineering" rel="nofollow noopener">this article</a>.

NASA Fabric Hexagons

Aaron

trevorwright06

This is a little kit card I found on Printables that I like. It is a challenge to put together, and there is a possibility that you will break your fingers. The end result is very cool.

Ford Model T Kit Card

cruizincris2006

Light box designed to hold typical LED strip lights found at most retailers.

Dallas Cowboys Lightbox

Mason

jajaum3d

🌟 Support My Work &amp; Unlock Exclusive Benefits!🌟 Become a patron on <a target="_blank" href="https://www.printables.com/@jajaum3d#join:64" rel="nofollow noopener">Printables.com</a> and gain access to early releases, commercial licenses, and more.  See all my designs on cults: <a target="_blank" href="https://cults3d.com/en/users/jajaum3d/creations" rel="nofollow noopener">https://cults3d.com/en/users/jajaum3d/creations</a> All my designs are protected by Copyright Law. Purchasing does not grant the right to sell any digital file or printed model of my designs without explicit consent. Please respect the hard work of 3D artists by never sharing or selling digital files.  <figure class="table" style="width:98.41%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td colspan="3"><h3>Support and Access Exclusive Designs</h3>This model is available for free, but you can choose to make a small donation and receive one of these exclusive variants. Alternatively, you can join the <a target="_blank" href="https://www.printables.com/@jajaum3d#join:64" rel="nofollow noopener">Printables Club</a> to access all these models and many more.</td></tr><tr><td><a target="_blank" href="https://cults3d.com/en/3d-model/gadget/iron-suit-edition-mobile-exo-suit" rel="nofollow noopener">Iron Suit Edition</a></td><td><a target="_blank" href="https://cults3d.com/en/3d-model/gadget/captain-s-legacy-edition-mobile-exo-suit" rel="nofollow noopener">Captain&#39;s Legacy Edition</a></td><td><a target="_blank" href="https://cults3d.com/en/creations/battle-mech-edition-mobile-exo-suit" rel="nofollow noopener">Battle Mech Edition</a></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2024-04-18_bc423fbf322cf.gif"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2024-04-18_c737f9d76a7dd.gif"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2024-04-18_7509d2a60bb71.gif"></figure></td></tr></tbody></table></figure><h3> Introducing the Mobile Exo-Suit: Your Phone&#39;s Ultimate Armor</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_ateqzu20qo45.gif"></figure>This unique design combines functionality and style, resembling an exoskeleton or suit of armor for your device.The Mobile Exo-Suit is ingeniously designed to adapt to different phone sizes, ranging from 70mm to 95mm, ensuring a perfect fit for various smartphones. Once placed on the stand, your phone gains arms and legs, giving it a playful and dynamic appearance. Not only that, but the hands of the exoskeleton conveniently hold your charging cable when not in use, keeping everything organized.The core structure of the Mobile Exo-Suit serves as the base, providing stability and support, while an additional armor layer enhances its aesthetic appeal, allowing you to personalize your device in style. The Mobile Exo-Suit adds a touch of elegance to your mobile experience.Experience the ultimate combination of functionality and style with the Mobile Exo-Suit - a worthy place for your beloved device.No paint, no supports and no glue needed.<h3>Printing Instructions</h3>Files in STL format to print without any support or brim and already in the best orientation. Recommended layer height: 0.2mm.<h4>Files to print organized by color:</h4><a target="_blank" href="https://www.prusa3d.com/product/prusament-pla-viva-la-bronze-blend-970g/" rel="nofollow noopener">Prusament PLA Blend Viva La Bronze</a><ul><li>Body-v2.stl</li><li>Arms-v2.stl</li><li>Legs-v2.stl</li></ul><a target="_blank" href="https://www.prusa3d.com/product/prusament-pla-prusa-galaxy-black-1kg/" rel="nofollow noopener">Prusament PLA Prusa Galaxy Black</a><ul><li>Armor.stl</li></ul>Individual files and a tolerance test also included<h4>Tips</h4><ul><li>The body needs good bridges and a good first layer to print well.</li><li>Print the legs for strength, increase walls and infill.</li><li>Put the armor before joining the arms and legs to the body, don&#39;t mix left and right parts.</li><li>On the forearm armor, put the elbow first <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_6b4i1thveb1j.gif"></li></ul><h4>Bed adhesion problems?</h4><ul><li>Disable the Elephant foot compensation setting it to 0, as the model already has it.</li><li>To put brim on everything is really annoying to remove later. This technique allows you to put it only on critical parts and in an easy way to remove later:<ul><li>Right click on the model and select “Add part&gt;cilinder”</li><li>Scale it to 0.2mm heigth, edit only the height and click on “drop to bed” to make it flat in the bed</li><li>Now drag it to under the hand for example and you&#39;re done. Repeat the process to any pat that you want an extra adhesion. You can use and scale shapes as your needs.</li></ul></li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_05osbsvfx5ow.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_kb21fikz1bow.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_wlztzmtn12tj.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_1hkki7rel13j.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_tjx12dzxbo1p.jpg"></figure>

Mobile Exo-Suit

phone cases

PrintMyDesign

Use of cutters: ✓ modeling/cutting out of coating material and subsequent decorating of cakes, cupcakes, etc. ✓ baking cookies, gingerbread ✓ cutting out and subsequent marking of lines in the technique of decorating with royal glaze ✓ home creation with children – plasticine or cutting out of baking or self-hardening material and subsequent coloring with colors

GRINCH COOKIE CUTTER

Alli

laisch

This is a scaled flyable micro version of the ASW20 sailplane from Schleicher. The model was created to be lightweight and printable in normal PLA.Because of it's lightweight behaviour it's a little bit fiddly to get it together properly but it's still strong enouth to survive crashes. So please read the Instructions before you build it.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_7930ef971b4078.gif"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_b32700811d73d.gif"></figure>&nbsp;<h3>Printing:</h3>Make sure you align the STL-Files flat with the build plate like in the pictures.&nbsp;The Fuselage and the Nose have to be printed in Vase Mode (0.12mm) for best quality and perfect stability. Make sure you geht your part cooling right otherwise the thin tail section won't print properly because of overheating. Turn Bottom Layers to 1 Layer.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_2xua1hjiurid.jpg"></figure>The Wing parts are printed in normal Mode with 0.12mm Layerheight. Make sure that the first layer prints in 0.2mm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_9yaljcx3l44z.jpg"></figure>After printing carefully remove the wings from your print bed and make sure not to overbend them.&nbsp;<h3>Assembly</h3>Clean up the parts from any print defects<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_mmrpjuqrlmyo.jpg"></figure>&nbsp;Testfit if the wings fit inside the fuselage. The reinforcement part of the wing should touch the fuselage. If not, just cut away the parts wich are too big.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_k461jxekhpvj.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_p3zauy5szoj1.jpg"></figure></td></tr><tr><td>Wing not aligned with fuselage</td><td>Wing aligned with fuselage</td></tr></tbody></table></figure>&nbsp;When the testfit is ok, put some superglue onto the wings and glue them in place.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_v2l13jrwi32n.jpg"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_4dvxkmto8krd.jpg"></figure>&nbsp;Make a testfit if the rudder fits in to the elevator. If not you can take a cutter knife to clean it up a little bit.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_hiskzgmshhkj.jpg"></figure>&nbsp;After that put the rudder and elevator together and secure them with some CA glue. Try to not use too much glue because of extra weight.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_c5669idp5zad.jpg"></figure>&nbsp;Glueing the rudder/elevator assembly to the fuselage is the hardest part of the build. It works the best if you put one small drop onto the fuselage and temporary secure it. After that you can check the alignement and adjust it properly.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_sklgvblwtn24.jpg"></figure>If it looks fine, just secure the whole thing with more superglue.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_58pkfcwdk5pu.jpg"></figure>&nbsp;To make the whole thing fly you have to add weight to the nose and adjust the center of gravity. For me a 4,5mm steelball did the trick. You can temporary secure the nose to the rest of the plane with some tape and check it's flight properties.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_9hxutt2kk35r.jpg"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_ui9nlrtydip2.jpg"></figure>&nbsp;For checking the center of gravity you can balance it on two screws. The COG should be at ⅓ of the wing measured from the front.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_vbnmudk1iyhh.jpg"></figure>if it does'nt fly properly you can also try to give it a little bit of lift by bending the elevator up.&nbsp;If it flys, you now can finally glue the nose to the rest of the sailplane.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-11-30_jasr1r5920mo.jpg"></figure>Have Fun!&nbsp;&nbsp;<figure class="table" style="width:92.21%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><thead><tr><th colspan="3">If you like this model you may have a look at my other flying toys too</th></tr></thead><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/81500" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-12-03_bc748d83c35e18.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/81500" rel="nofollow noopener">Geared Propeller Launcher</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/76104" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-12-03_eadf473572ad4.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/76104" rel="nofollow noopener">Flying Bat</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/21091" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/231668/2023-12-03_a8fc21a53267c8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/21091" rel="nofollow noopener">Cross Bow</a></td></tr></tbody></table></figure>

ASW20 Sailplane (micro glider - flyable)

Aircraft

Amazing STL Creator

Thank you so much for choosing to take a look at this model!These STL files are demos showcasing what our program can do. You can download them to assess their quality. All models were created within the program, and the possibilities are endless.&nbsp;TRAILER:<figure class="media"><oembed url="https://www.youtube.com/watch?v=FlMRGmDoBtA"></oembed></figure>&nbsp;&nbsp;Who are we?We are a small team of three people with a shared vision of creating small but powerful programs for the 3D printing community.&nbsp;Our visionis to enable even those without design or modeling experience to easily achieve beautiful and professional results.We dream of reaching the entire community, both private individuals and professionals, as our programs are powerful enough for both. With our future ideas, our target audience will be extensive.&nbsp;We always welcome feedback and are open to questions or other relevant information.&nbsp;If you wish to use the programs yourself, explore the many possibilities on our <a target="_blank" href="https://amazingstlcreator.etsy.com" rel="nofollow noopener">website</a>&nbsp;We are confident you will enjoy our programs. Thank you for your time.AlexanderAmazing STL Creator Co-Author&nbsp;&nbsp;<blockquote>Note: It is not allowed to sell the programs, the models generated through the programs, or upload them to various sites. If you wish to sell the models, you can contact the following email: amazingstlmanagement@gmail.com&nbsp;When you download the file, there will be a &#34;read me&#34; text containing relevant information about the programs.On the STL model itself, there will also sometimes be a &#34;sign&#34; advertising that it was created with our programs.I&#39;ve positioned it in a way that makes it easy to remove using the clip function on the slicer you&#39;re using, without affecting the STL file.This is simply to facilitate spreading the message about the programs&#34;If this is perceived as negative, and you&#39;re unable to remove it, feel free to reach out to me, and I&#39;ll upload the file to you without the text.</blockquote>

Articulated Plate 500+ Joints - No Support

Fidget

VRsculpts

Another flexible articulated print of Mario, this time wearing a bee costume! This model uses the same print-in-place “face” from my Frog Mario on Makerworld so they can be used interchangeably and you can print multiple faces at the same time to save on filament. Layer change on the face is required for single AMS to change from brown hair to blue eyes allowing 5 colors to be printed for the face.&nbsp;This bee Mario is very small, about the size of an actual bumblebee! The wings are thin at this size, only 2 layers which helps them be flexible using standard PLA. Super glue wings and face to body, easy assembly.&nbsp;Join my Patreon if you would like to sell physical copies of my designs, your support is appreciated and motivates me to create more cool stuff to share! https://www.patreon.com/VRsculpts

Itsa BEE, Mario!

Andrea

teedeebee

This is a complete re-design of a lithophane holder I saw earlier on Youtube or here on Thingiverse. But this was for a small lithophane only and I needed a bigger one. Since nobody was able to share the design files with me so I could change the dimensions and add improvements, I decided to design my own. And here it is....Lithophane settings using LithoPhaneMaker.com (100% square image is essential!)&nbsp;Frame Option: FramedLithophane Resolution: 0.3Lithophane Height: 150Angle: 90Frame Width: 5Frame Height: 5Overhang Angle: 45Maximum Thickness: 3.6Minimum Thickness: 0.6Picture Spacing: 10Preferred PLA: eSun PLA+ Cool White.&nbsp;Printer settings for best results: Layer Height: 0.1mm, Speed: 45-60 mm/s, 6 walls, 99% infill (not 100%).Electronics needed: standard 12V stuff you can get from Banggood, Wish, Aliexpress, <a target="_blank" href="https://www.amazon.com/?linkCode=ll2&tag=thingiverse09-20&linkId=e4759bff1fa9a55a0f897d801ce2d765&language=en_US&ref_=as_li_ss_tl" rel="nofollow noopener">Amazon</a>, etc.Shopping list (please CHECK if you have the right one/size as they change quite often):<ul><li>12V Adaptor: <a target="_blank" href="https://nl.banggood.com/LUSTREON-AC100-240V-TO-DC12V-2A-24W-Power-Supply-Adapter-For-Strip-Light-Female-Connector-p-1154361.html?rmmds=search&ID=3426&cur_warehouse=CN" rel="nofollow noopener">https://nl.banggood.com/LUSTREON-AC100-240V-TO-DC12V-2A-24W-Power-Supply-Adapter-For-Strip-Light-Female-Connector-p-1154361.html?rmmds=search&ID=3426&cur_warehouse=CN</a></li><li>Leds: Any 12V Led plate will do. White or yellow.</li></ul>Use these (use 2 pcs): <a target="_blank" href="https://www.wish.com/product/5c07382dbf1d21419b669b96?share=web" rel="nofollow noopener">https://www.wish.com/product/5c07382dbf1d21419b669b96?share=web</a>Or these (use 1 pc): <a target="_blank" href="https://www.wish.com/product/5c7f6c46e279f231e0ccd3c3?share=web" rel="nofollow noopener">https://www.wish.com/product/5c7f6c46e279f231e0ccd3c3?share=web</a><ul><li>Switch: <a target="_blank" href="https://nl.banggood.com/10Pcs-Mini-Round-Black-2-Pin-SPST-ON-OFF-Rocker-Switch-Button-p-1137492.html?rmmds=search&cur_warehouse=CN" rel="nofollow noopener">https://nl.banggood.com/10Pcs-Mini-Round-Black-2-Pin-SPST-ON-OFF-Rocker-Switch-Button-p-1137492.html?rmmds=search&cur_warehouse=CN</a></li><li>DC connector: <a target="_blank" href="https://nl.banggood.com/10pcs-DC-022-5_5-2_1mm-Round-Hole-Screw-Nut-DC-Power-Socket-ROHS-Internal-Diameter-5_5mm-p-1200831.html?rmmds=search&cur_warehouse=CN" rel="nofollow noopener">https://nl.banggood.com/10pcs-DC-022-5_5-2_1mm-Round-Hole-Screw-Nut-DC-Power-Socket-ROHS-Internal-Diameter-5_5mm-p-1200831.html?rmmds=search&cur_warehouse=CN</a></li></ul>Lid attachment: any M4 nut and bolt will do.

Lithophane Holder 150mm

Lithophane BOXES

DonMatis

GrinchTree is here, carrying evil plans to takeover your home decoration for Xmas!!&nbsp;Can be used in the following combinations:<ul><li>Half Christmas tree with Grinch filament painting</li><li>Grinch filament painting only, as wall decoration</li><li>Join 2 half's of the Christmas tree model to make a full Christmas tree</li></ul>Added two colour choices Green (to combine with Green Tree) and Grayscale (my traditional style to combine with Silver, Black or White Tree).&nbsp;As usual, print the Filament Painting part with 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;<figure class="table" style="width:98.42%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/180301/2023-11-17_dffb8875f5848.jpg"></figure></td><td>Filaments Used:<ul><li> PLA Overture Black</li><li> PLA PolyTerra Charcoal Black</li><li> PLA Overture Cement Gray</li><li> PLA Ziro Dark Gray | or PLA Sunlu Gray</li><li> PLA BambuLab Basic Gray</li><li> PLA Ziro Light Gray | or Overture Light Gray</li><li> PLA Overture White</li></ul>Swap Instructions:<ul><li> Start with Black</li><li> At layer #7 (0.64mm) swap to Charcoal Black</li><li> At layer #9 (0.8mm) swap to Cement Gray</li><li> At layer #11 (0.96mm) swap to Dark Gray</li><li> At layer #14 (1.2mm) swap to Gray</li><li> At layer #20 (1.68mm) swap to Light Gray</li><li> At layer #22 (1.84mm) swap to White for the rest.</li></ul></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/180301/2023-11-17_066bf072866c7.jpg"></figure></td><td>Filaments Used:<ul><li> PLA Overture Black</li><li> PLA PolyTerra Charcoal Black</li><li> PLA Ziro Translucent Green</li><li> PLA Ziro Fluo Green</li><li> PLA+ Esum Green</li><li> PLA Overture White</li></ul>Swap Instructions:<ul><li> Start with Black</li><li> At layer #7 (0.64mm) swap to Charcoal Black</li><li> At layer #10 (0.88mm) swap to Translucent Green</li><li> At layer #21 (1.76mm) swap to Lime Green</li><li> At layer #26 (2.16mm) swap to Peak Green</li><li> At layer #28 (2.32mm) swap to White for the rest.</li></ul></td></tr></tbody></table></figure>&nbsp;Highly recommend to use the provided printing profiles for good results! Looking forward to see your prints!&nbsp;<blockquote>Enjoy my work? Support me by joining my club on <a target="_blank" href="https://www.printables.com/@DonMatis" rel="nofollow noopener">printables</a>. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.</blockquote>&nbsp;&nbsp;

Grinch Tree

ThisFact

<h2>NEW V2 VERSION : <a target="_blank" href="https://makerworld.com/en/models/159473#profileId-175085" rel="nofollow noopener">Rubber Band Gun V2 (Print-In-Place)</a></h2><h3>Rubber band gun thing V1:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/560921/2023-11-12_3ba7e2ffb6259.gif"></figure>&nbsp;Something i was planning to finish for a while but had been stuck on my hard drive for too long, It's a pretty simple design with an escape mechanism that shoots rubber bands when you pull the trigger.------------------------------------------------------------<figure class="image image_resized image-style-align-right" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/560921/2023-11-13_i52netnsnm1e.png"></figure>&nbsp;Suggested print settings:<ul><li>Print with 25% to 100% hexagon infill for good strength.  </li><li>0.2mm layer height  </li><li>0.4mm nozzle for the best print quality and for no issues with the print in place mechanism</li></ul>&nbsp;Specs:<ul><li>Can hold up to 3 rubber bands.  </li><li>Pretty easy to hold in hand.  </li></ul><h3> Commercial use :</h3>Want to use it for commercial purposes? Sure, i allow it as long as you credit me as the creator.

Rubber band gun V1 (print in place)

Toy Guns

Julia Ebert

This is a big toy human figure that's inspired by a Lego minifigure. I spent a lot of time making this model from scratch to match the original design while making tweaks for tolerances, printability, and strength. While there were a number of minifigure models I found online, most were not designed for printing, which is a particular challenge for the leg, arm, and hand joints. I'm particularly proud of the universal clip I designed for these, which makes for easy assembly and stiff-enough joints to pose your figure.I designed the clips and tolerances for this model to be printed at 100% (10x original Lego scale), but people have previously had success printing my <a href="https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale" rel="nofollow">10x Lego-like skeleton</a> at smaller scales (eg, 50% or 5x Lego-scale).Now that I have a base model for a Lego-like figure, this opens up a host of options for specific Lego-like figures. If there's something particular you're interested in, leave a comment or send me a message! If you want to make your own modifications, I've included STEP files for all parts (just be sure to give credit for my original design).Fully assembled, this model stands 40 cm (~16 inches) tall. I printed mine with Hatchbox true blue PLA, Hatchbox true red PLA, and Prusament mango yellow PETG.<h4>Printing Instructions</h4>I've included 3MF files for all parts, and parts should import correctly oriented for printing.<ul><li>For PrusaSlicer 2.6+: you just need to load the project file. (This makes use of organic supports, for the legs, which are added with PrusaSlicer 2.6.)</li><li>For other slicers: I've included details about special instructions for all parts, so you should be able to replicate anything necessary for proper printing. Except where otherwise noted, I printed parts in PLA at 0.15mm layer height with 7% cubic infill and without supports.</li></ul>You will need to print:<ul><li><code>32x-connector-pins.3mf</code>: You should need 30 pins for assembly (or 26 if you print the solid head); this has 2 extra just in case. If you have trouble with bed adhesion, add a brim</li></ul><h5>Legs</h5><ul><li><code>legs.3mf</code>: Uses tree supports the top of the lower hole on the leg.</li><li><code>hips.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Body</h5><ul><li><code>arms.3mf</code>: These print with a small surface area on the bed (the wrists), so you might want to add a brim if you have trouble with bed adhesion.</li><li><code>body.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Head & hands</h5><ul><li><code>2x-hands-wrists.3mf</code>: Requires supports on the underside of the wrist clip. Like the limb clips, I recommend printing with PETG (or similar) with 25% infill.</li><li>One of: (all require supports on the underside curve of the head)<ul><li><code>head-face-mmu.3mf</code>: Print the head & face as one part with some sort of multi-material printer (e.g., Prusa MMU or Bambu AMS). Use supports on the underside curve of the head.</li><li><code>split-head.3mf</code> and <code>face.3mf</code>: Print the head (with cutouts) in two pieces. Use pins and glue to connect the halves. Print the face separately and glue it in.</li><li><code>solid-head.3mf</code> and <code>face.3mf</code>: Print the head and face as separate prints. Use supports on the underside curve of the head. Then glue the face parts into the head.</li></ul></li></ul><h4>Assembly Instructions</h4>In addition to the printed parts, you will need cyanoacrylate glue (CA glue/superglue). <h5>Legs</h5><ol><li>Glue the pins into the top of the hip. Add glue to the holes and bottom surface of each of the hip pegs and attach. Important: The slope of each hip peg should be facing out to the sides. If the pins don't want to go together, check that you have this orientation right!</li><li>Use the same gluing approach to attach the limb clips to each side of the hips.</li><li>Gently but firmly press each leg onto the clips. It should snap into place. The hips are symmetric, so you can't put the legs on backwards. This requires a fair bit of force, but you shouldn't need a hammer. If it won't go on, slightly sand or file down the outer head of the limb clip (rather than the inside of the hole on the leg). Warning: The clips are not designed to come out once they're attached, so make sure you're ready.</li></ol><h5>Body</h5><ol><li>Glue the limb clips into each arm, like you did for the legs.</li><li>Glue the wrist onto the hand, with the pins. Because of the relative print orientations here, it's best to use a bit more glue here to make sure it stays on.</li><li>Press each wrist clip into the arm. (They're the same, so you can't put in the wrong hand.)</li><li>Press each arm clip into the body. The body is also symmetric, so you can't put the arms on backwards.</li></ol><h5>Head</h5>If you printed the separate head and face pieces, glue the face pieces into the head. You may need to file or sand some of the face pieces to fit, depending on how well the supports worked.<h4>License Note</h4>This model is marked as non-commercial because I don't want anyone (including myself) having Lego come after them with a lawyer. If you choose to sell prints of this model, you do so at your own risk!

Mega Lego-like Minifigure (10:1 scale)

statues/action figures

Slowpoke's Workshop

Christmas trees and Snowman

Christmas 

kreativmonkey

Compact gauge for outer and inner radius 1-20 mm.Printed without support:Layer hight 0,15 mm (first layer 0,20 mm).&nbsp;You need two M5x30 screws and two M5 lock nuts for assembly.Inspired by <a target="_blank" href="https://www.thingiverse.com/thing:5205494," rel="nofollow noopener">https://www.thingiverse.com/thing:5205494,</a> many thanks. Original: https://www.printables.com/model/137696-radius-gauge-1-20-mm

Radius gauge 1-20mm

tools

michele.fattoruso

Remixed the previous model, adding a base to make it easily printable, and colored it to support bambu printers

Goku Support Free Multicolor

ANIME CHARACTERS

barbasnoo

This is a cupholder adapter that is designed to fill the void in a 2 step cupholder, and convert it in to one, large cupholder. I have tried it in a couple of vehicles, with good results. Please consider taking measurements to ensure it will be a good fit for your particular application.

Cup Holder Adapter (For Large Cups in Smaller Cup Holders)

car stuff

N3RD solutions

Stash Box

fly fishing 

TotalChaos

Become a fighter pilot with this fun and easy to print jet.&nbsp;Depending if you want dart like speed or more of a glider you only need to adjust the tail flaps.Includes the launcher fob, all you need is an elastic band.&nbsp;Have fun printing and flying.

Stealth Fighter Jet Glider - Easy Fast Print  

Aiden 

MakerWorld

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/281253/2023-09-20_ca373507d148d.png"></figure>This 3D printed version of the tank strives to replicate the authentic details in terms of appearance, including intricate undercarriage details. It features a rotatable and elevating turret, three accessible hatches, rotating wheels and tracks, as well as a suspension system with articulated movement. Through careful disassembly, arrangement of components, and the addition of auxiliary structures, all parts can be printed without the need for supports. Furthermore, the openable chassis design preserves the potential for future internal structural DIY work.&nbsp;Parts count: 157Estimated build time: 1hTools: CA Glue-medium, hand drill, pen knife, sand paper&nbsp;More Details version print profileRecommended filaments:Bambu PLA Matte Desert Tan (11401)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043</a>&nbsp;Bmabu PLA Matte Latte Brown(11800)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035</a>&nbsp;Bambu PLA-CF Lava Gray(14101)<a target="_blank" href="https://store.bambulab.com/products/pla-cf?variant=40828231581811" rel="nofollow noopener">https://store.bambulab.com/products/pla-cf?variant=40828231581811</a>&nbsp;Hotend: 0.2mm Stainless Steel & 0.4mm Hardened SteelPrint time: 50.8h&nbsp;&nbsp;&nbsp;Time Saving version print profileRecommended filaments:Bambu PLA Matte Desert Tan (11401)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043</a>&nbsp;Bambu PLA Matte Latte Brown(11800)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035</a>&nbsp;Bambu PLA-CF Lava Gray(14101)<a target="_blank" href="https://store.bambulab.com/products/pla-cf?variant=40828231581811" rel="nofollow noopener">https://store.bambulab.com/products/pla-cf?variant=40828231581811</a>&nbsp;Hotend: 0.4mm Hardened SteelPrint time: 13.9h&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures when printing small parts&nbsp;Follow the Assembly Guide below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.

Panzerkampfwagen IV Tank

vehicles

dp makes

A pan flute, also known as panpipes or syrinx, is a musical instrument that works on the principle of the closed tube. It consists of multiple pipes that gradually increase in length (and sometimes girth) from one end to the other. Pan flutes have been popular as folk instruments for centuries, with various varieties found in cultures around the world.&nbsp;I think my idea of creating a "Whistle Pan flute" by connecting whistles of different lengths in a line is an interesting and creative one. While it may not be a completely unique idea, it certainly has the potential to produce a unique and fun sound. By carefully selecting and aligning the whistles, it may be possible to achieve a greater range of notes than a traditional pan flute. It would be exciting to see how different materials and shapes of whistles could be used to create even more variations in sound.&nbsp;This model is in progress and I will continue to tune until I have a model that gives a great Whistling Flute sound.&nbsp;•Print settings•&nbsp;Supports: No Resolution: 0.2mm Infill: 15%&nbsp;<h4>Important notice:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.paypal.com/paypalme/DPalacionis" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.

Whistle Pan flute

Music

planetace

quick and easy replacement for often worn out or broken snappers for caravan doors i printed them in white and grey for 2 different caravans&nbsp;Update: I added 2 thicker versions of the pin, so you can look which one fits most to your setup

Caravan door hook and snapper

HOUSE

jordanwallace_90

This is a small golf ball model that I made to hide the knot on an elastic rope so I can tie a golf ball holder on my bag. &nbsp;I've been calling it a "Tether" but a "Knot Bead" might be the correct term?&nbsp;I added a .3mf file where I scaled the diameter of the ball from the size of a regular golf ball to 25mm. This also makes it so the 3mm elastic rope I used is a nice snug fit when you tie a knot on the end.&nbsp;&nbsp;

Golf Ball Knot Hiding Bead

Golf

TheRewGarou

Works well with the vented riser on my profile. Used 2 ¼ 1 ½ long carriage head bolts to secure to the vent. Allows you to relocate the rear spool holder to either side.

Bambu Lab Spool Relocation Mount

For P1S

PenolopyBulnick

I wanted to figure out more fun designs that could look good with tri-colored filament. I decided to take the rupee design and give it some interesting dimension. &nbsp;Earrings are printed in two parts that need to be glued back to back if you want the look to show front and back. It could be printed as one piece, but because of overhang, it just doesn't look as good. &nbsp;I think it looks great if you do one color first, and then change to another to get more dimension to the pieces.

REQUESTS

Lone Star Heroes Outdoors

Meagan

masks/suits

Boat

Kayla

Aaron

Dad

Mason

phone cases

Alli

Aircraft

Fidget

Andrea

Lithophane BOXES

Alli

Toy Guns

statues/action figures

Christmas

tools

ANIME CHARACTERS

car stuff

fly fishing

Aiden

vehicles

Music

HOUSE

Golf

For P1S

zelda