a2kcollett

Prestige Prototype

Introducing the fully printable squash ball Anti-Vibration Feet:Upgrade your 3D printing experience with our Anti-Vibration Feet – a superior alternative to the standard options available. (I found that the optional anti-vibration feet were too soft and the printer wobbled too much.)Based on a design inspired by squash balls, our feet are fully 3D printable in TPU, providing optimal flexibility and vibration dampening.&nbsp;Witness a noticeable improvement in print quality as these feet effectively absorb vibrations. Crafted for durability and functionality, our Anti-Vibration Feet offer a seamless integration into your setup, ensuring a smoother printing process.&nbsp;Step into a new realm of precision and reliability with these enhanced feet. Elevate your printing quality and minimize vibrations with our thoughtfully designed, TPU 3D printed Anti-Vibration Feet – the key to unlocking superior results in every print

Anti-vibration Feet- Printable Squash ball for Bambu Lab P1S, P1P and X1c

addons

David Krammer

You can print it with AMS like I did for convenience, but you could also just make the printer stop at the middle height and switch colors yourself.This model makes about 45g of filament.

DIY Dual Color Filament 45g [NO AMS needed!]

Magic Studio 3D

"Stitch 3D Model" 🌟🌺 Embark on a whimsical journey to the enchanting world of Disney with this delightful Stitch 3D model! Inspired by the lovable character from Lilo & Stitch, this intricately designed piece will add a touch of intergalactic charm to your decor.&nbsp;This model does not yet contain the step file, so to import it into Bamboo Studio, you just have to select all the STLs and drag it to Bambu Studio!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/399219/2023-10-27_6aa316784592c.png"></figure>&nbsp;Bambu Studio Settings: The settings are just a recommendation, however you can print with the settings you are already used to using! • Preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 • Quality → Wall generator → Arachne • Quality → Wall transitioning threshold angle → 50º • Strength → Advanced → Infill/wall overlap → 20% • Quality → Advanced → Avoid crossing walls • Increasing retraction / reducing temperature can help reducing wisps • I recommend always starting with the lighter colors. Recommendations before and after printing:&nbsp; • Use textured PEI sheet • To make the hole for the USB cable input for the LEDs, you can do it with a soldering iron, drill a hole or you can do it with a slicer by adding a negative model in the place where you want to make the hole • For the pieces to give more light, I recommend using aluminum tape on the inside of the back cover • Be careful to clean the table well&nbsp;Materials and tools used to assemble parts:&nbsp; • Aluminum Tape for the back cover • Hot glue pistol to place in the spacing of the LEDs so they don't come off • Soldering iron to make the hole for the USB cable and/or to solder the LEDs with the USB cable with ON/OFF switch • White or RGB LEDs&nbsp;To find out the list of all the components I use, you can click on the link in my description, and you will find it in the first post!

Stitch Lightbox LED Lamp

lightbox

waveman

*** Check out the <a target="_blank" href="https://makerworld.com/en/models/505390" rel="nofollow noopener">Customizable Textured</a> version of this model! ***&nbsp;Infinity cube with strong hinges that won&#39;t break easily. This cube is designed with a lot of slack, so that it moves freely.&nbsp;I designed this after having several fails with other models, where the hinges would break when trying to loosen them after printing. Hopefully, this design will print well for everyone!&nbsp;These models and openscad source file can also be downloaded from <a target="_blank" href="https://github.com/jhpieper/sturdy-infinity-cube" rel="nofollow noopener">https://github.com/jhpieper/sturdy-infinity-cube</a><h3>Post-Printing</h3>The hinges should bent quite easily after printing, with the hinges on the front and back side being more tight due to the orientation. Just work the cube a few times and everything should be quite loose.<h3>Cube Sizes</h3>It is best to not scale the model, as it messes with the spacing in the hinges.Instead, check out these other models optimized for their size:<ul><li><a target="_blank" href="https://makerworld.com/en/models/36109#profileId-33936" rel="nofollow noopener">16: S</a></li><li>20: M -- try this first! This is the most common size.</li><li><a target="_blank" href="https://makerworld.com/en/models/36113#profileId-33940" rel="nofollow noopener">24: L</a></li><li><a target="_blank" href="https://makerworld.com/en/models/36115#profileId-33943" rel="nofollow noopener">30: XL</a></li><li><a target="_blank" href="https://makerworld.com/en/models/36116#profileId-33945" rel="nofollow noopener">36: XXL</a></li></ul><h3>Other Versions</h3><a target="_blank" href="https://makerworld.com/en/models/505390" rel="nofollow noopener">Customizable Textured Infinity Cube</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000021188/design/2024-06-23_8e8ad03b44d33.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/41416#profileId-41687" rel="nofollow noopener">Halloween Sturdy Infinity Cube</a> (two color print with AMS)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000021188/design/2023-10-15_f2f98325d3a09.jpg">&nbsp;<a target="_blank" href="https://makerworld.com/en/models/31328#profileId-27875" rel="nofollow noopener">Two-faced Sturdy Infinity Cube</a> (two color print with AMS)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000021188/design/2023-10-15_599e03246b88.png">

Sturdy Infinity Cube

fidget

Zurlingo-3D

Christmas Puzzle Gift Box *Extreme Edition*&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/sp7ZSfbfw7A?si=MVZSIp2eIlWSBcrE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/sp7ZSfbfw7A" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Features:<ul><li>A locked lid</li><li>A hidden key and bolt locking system with an additional 20 hidden screws to securely hold the lid in place</li><li>3 Different screw types</li><li>3 Different screw drivers</li><li>Secret compartments to hide the screw drivers</li><li>Super strong lock (Box will not open without removing the bolt and all screws)</li><li>Print in multiple colours without AMS</li><li>Fun for kids</li><li>Secret storage</li><li>Reusable</li><li>Tolerance test included. This is to ensure all parts will fit before committing to a long print.</li></ul>This Christmas puzzle box is a great addition to anyone's Christmas day!&nbsp;Fill it with sweets or gifts and give your kids the challenge of figuring out how to open the lid!&nbsp;You need to print the following parts for a full puzzle box:<ol><li>Box</li><li>Lid</li><li>Side ribbon strip x 4</li><li>Hidden ribbon strips x 3</li><li>Top ribbon strips</li><li>Key</li><li>Bolt</li><li>Bolt Cap</li><li>Key Cap</li><li>20 Screws</li><li>3 Screw Drivers</li></ol>All parts are easy to print and fit together easily with generous tolerances.&nbsp;Assembly:&nbsp;<ul><li>Tilt the box on its side</li><li>Put the lid on</li><li>Insert all 20 screws on all 4 sides of the box</li><li>Gently slide a side ribbon strip into the track.</li><li>Keep sliding until it meets the stop.</li><li>Repeat this on all 4 sides.</li><li>Insert the drivers into the recessed holes at the 3 corners</li><li>Slide the hidden ribbon strips in place to cover the holes/drivers</li><li>Locate the bolt through the hole in the box and into the threads in the lid. (Start by hand)</li><li>Turn the bolt all the way in with the key</li><li>Cover the bolt with the bolt cap</li><li>Put the key into it's secret compartment</li><li>Cover the key with the key cap.</li></ul>&nbsp;Usage:&nbsp;<ol><li>Take off the caps (Key cap is deliberately tricky - Bolt cap can be popped out by squeezing the box)</li><li>Tap the box on your hand or a hard surface to release the key (if it hasn't already fallen out)</li><li>Use the key to unscrew the bolt enough to get a grip with your fingers.</li><li>Remove the bolt entirely and place to one side.</li><li>Remove the hidden ribbon strips</li><li>Remove the 3 screw drivers</li><li>Remove all 20 screws on all 4 sides of the box</li><li>Open the lid!</li></ol>I have included a tolerance test in the model files and pre sliced profile. This is purely if you are trying to scale up or down and want to check tolerances of all parts. It can also be used to check that you printer is dialled in properly before committing to the full box print.&nbsp;Print Settings:&nbsp;Nozzle: 0.4mmInfill: 12% GyroidLayer Height: 0.2mmSupport: NonePerimeters: 5Top/bottom Layers: 5&nbsp;This will make everything pretty solid with minimal infill being used.&nbsp;Tip: If you find that the side ribbon strips and/or the screws are tight, then print them at 0.12 layer height. This should give a little more tolerance between the sliding and interlocking parts.&nbsp;Thanks for looking!&nbsp;Please don't forget to post pictures of your makes :)&nbsp;EDIT:Check out my latest gift box LIVE on my profile now! :P(Tap The Picture)<a target="_blank" href="https://makerworld.com/en/models/102875#profileId-109543" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/295270/2023-12-22_b9dc197ca3d78.png"></a>

Puzzle Gift Box *Extreme Edition*

christmas

laisch

<h3>HUGHES MD - 500 (flyable pullcopter) </h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_sman5x65txu7.gif"></figure>&nbsp;&nbsp;<h3>Externals</h3>For launching the MD-500, you need to make the “<a target="_blank" href="https://makerworld.com/de/models/81500" rel="nofollow noopener">Overpowered Heli Launcher</a>” before:<figure class="image"><a href="https://makerworld.com/de/models/81500" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_cmrmg9lwcdhu.jpg"></a></figure>&nbsp;<h3>Printingsettings</h3>Print as light as possible. I used 2 perimeter, 0.2mm layerheight and 10% infill on the helicopter body.For the Rotor use Arachne in the slicer.&nbsp;<h3>Postprocessing</h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_n770l86x94u8.jpg"></figure>Clean the hole for the shaft with an 8mm drill bit. Make it as clean as possible to avoid friction.</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_41bpt3jnpijj.jpg"></figure>Add the pins to the body and glue the two haves together with some superglue</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_bb2k67jpmjiq.jpg"></figure>Add a drop of superglue into the skid holes and glue the skids in place</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_huhj8w7d9shl.jpg"></figure>To make the helicopter fly stable, you have to direct the airflow of the propeller to act as a counterforce against the rotors spinning direction. The easiest way is to make a fin with transparent tape.</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_i9cggf52mewy.jpg"></figure>You have to adjust the sice and angle of the tape according to your friction on the shaftTestfly -→ adjust → repeat …</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_61dldorkdcxe.jpg"></figure>Mount the rotor to the shaft. It should be friction fit, but if its too lose you can add some superglue. (The rotor should spin freely)</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_etlatpk1760y.jpg"></figure>To stop the helicopter from rotating during the launch, you have to add the helistops to your launcher. Just remove the old M3x6 screw and replace it with a M3x10.</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_7efl5p749tfj.jpg"></figure>Have Fun</td></tr></tbody></table></figure>&nbsp;

addons

wow

lightbox

fidget

christmas

interesting