a1benny

HEIECN

温馨提示：本模型仅用于学习交流使用，严禁用于商业用途，自己打了用用就好，严禁倒卖，否则造成任何后果自负。&nbsp;其他配件请看开源页面：https://www.heie.cn/post/66.html

小米米家鱼缸双水泵转接口，小米鱼缸过滤修改

Aquarium

jonathan1987

Don&#39;t miss the Gear soccer render video with audio:<a target="_blank" href="https://youtu.be/VGp_2spfwxk?si=q_Nbf0h1zSOwNEkn" rel="nofollow noopener">https://youtu.be/VGp_2spfwxk?si=q_Nbf0h1zSOwNEkn</a> See my other project (click on image on web, from app click link profile below):<a target="_blank" href="https://makerworld.com/en/@jonathan.albori" rel="nofollow noopener">https://makerworld.com/en/@jonathan.albori</a> <a target="_blank" href="https://makerworld.com/en/models/476711#profileId-387723" rel="nofollow noopener"><img class="image_resized" style="width: 91.66%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454618/design/2024-05-29_fda6a5f097061.gif"></a><a target="_blank" href="https://makerworld.com/en/models/184812#profileId-203514" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454618/design/2024-05-08_ecca20e0289dd.gif"></a><a target="_blank" href="https://makerworld.com/en/models/229148#profileId-246630" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454618/design/2024-05-08_aea43dfc3055c.gif"></a><a target="_blank" href="https://makerworld.com/en/models/204867#profileId-225049" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454618/design/2024-05-08_1895eb829717a.gif"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/154040#profileId-168352" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454618/design/2024-05-08_352e26dd320dc.gif"></a><a target="_blank" href="https://makerworld.com/en/models/426709#profileId-330597" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454618/design/2024-05-08_6a59dbdbab9ed.gif"></a><a target="_blank" href="https://makerworld.com/en/models/133447#profileId-169972" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454618/design/2024-05-08_114b3964cc17b.gif"></a>&nbsp;Hello everyone I present my new game to do in the company, Gear Soccer.The instructions can be found in the image above , below I put the descriptions of the slicer. You will find everything in the project already set.&nbsp;&nbsp;In the objects in question I set a layer height of 0.16 this because they must be as precise as possible to be screwed and 100% infill.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454618/design/2024-05-05_dedb6875a1007.png"></figure>In the image below, the ball settings are set to 100 percent fill to make it heavier, this will be screwed<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454618/design/2024-05-05_c47faf3dc21b2.png"></figure>&nbsp;&nbsp;Happy Printing!

Gear Soccer - Fully 3d printable pinball soccer

sparq-e

For those of us with phones that don't support wireless charging, we rely on USB-C cables. Tesla's phone tray does not really accommodate plugged in phones so this model creates the needed space to be able to use the space while charging.&nbsp;Simply print and press-fit into the bottom of the tray area - it should fit snuggly. I drive like a maniac and have not had my phone fly out of the cradle (yet).&nbsp;I recommend printing in ASA, ABS, PETG or any other filament that could withstand potential higher temps.&nbsp;

Tesla Y Phone Charger Spacer (Tested on 2023 Model)

Model Y

E.T.

Please try out my newly released revision 2.0 here: <a target="_blank" href="https://makerworld.com/en/models/376496" rel="nofollow noopener">https://makerworld.com/en/models/376496</a> Thank you :)&nbsp;You knew it was coming to this.&nbsp;In TPU this is a fun very squishy ball, and you don't need to commit to a giant print like the basketball!&nbsp;The PLA print (I used Matte White by Bambu) bounces well, and even sounds like a ping pong ball.&nbsp;The PETG profile seems to be the best in my opinion, it prints better, and bounces more consistently.&nbsp;Have fun!

Airless Ping Pong Ball

Sports

Jerryie

&nbsp;&nbsp;This set includes screws, nuts and washers of all kindsISO 4017 DIN 933&nbsp;With smaller screws and nuts, it is necessary to set the height as low as possible so that the screw works correctly for example at M3, M4 and M5&nbsp;&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/194263/2023-11-22_69ea780efc7e4.png"></figure>&nbsp;<figure class="image image_resized" style="width:25.39%;"><img src="https://makerworld.bblmw.com/makerworld/draft/194263/2023-11-22_379d07fbbf734.png"></figure>&nbsp;&nbsp;The screws are optimized for easy twisting, but if there is a problem with any type, write it in the comments and I will fix it I tested it from PLA and they worked fine&nbsp;NO SUPPORT!&nbsp;&nbsp; There is a bonus in files for people who often lose their extension :)

Screw Set M3 M4 M5 M6 M7 M8 M10, ISO 4017

Tools

3D servis

The stand is able to tilt according to your needsEasy print without supports nor glueTested with PLA and PETG&nbsp;Scrues and worm connect without glue, only connect together with nuts&nbsp;Here is my phone stand<a target="_blank" href="https://makerworld.com/en/models/152602" rel="nofollow noopener">https://makerworld.com/en/models/152602</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/782406/2024-03-01_82b5c33de222b.webp">

Adjustable ipad - tablet stand

Apple

Wcad00

UPDATE 9 - 25.03.2024<ul><li>updated profile REQUESTS - added plate 17 - user @gurthyy  wanted a new module to accomodate a mac mini on its side - added a new two space combo module for mac mini and keyboard/mouse</li><li>updated profile REQUESTS - added plate 18 - user @wmeringolo wanted a new module for miniature painting  - added a new combo module for cup + brushes</li></ul>&nbsp;UPDATE 8 - 16.03.2024<ul><li>updated profile REQUESTS - added plate 13 - user @bambibam  wanted a new combo 1x module for sd/ microsd/usbA/ usbC  - so there is a new combo module available</li><li>updated profile REQUESTS - added plate 14,15,16 - user @gurthyy wanted a way to angle the organizer after specific desktops - introducing Pizza Slices - angled 30degrees modules coming in two snap-on formats for now, but with room for much more customisation. Plate 14 has the universal pizza slice base + simple catch all top; plate 15 has an split/organized top, and plate 16 has a slide-on interchangable name plate - see photos in print profile. Everything was printed and tested for a perfect fit - check photos</li></ul>UPDATE 7 - 05.03.2024<ul><li>updated profile ACCENTS - user @Xanders_Builds noticed an issue i missed with the ‘’steps' accent brims not fitting corectly - too loose - now it is updated and fits fine</li><li>updated profile REQUESTS - added plate 10 -one new module  ASP @user_2207529250  and @bluebeansisradi requested a stand for a ps5 and xbox controller - new module that occupies two spaces and needs to be snapped into place - stand for ps5 and xbox controller - i tested a ps5 controller but i dont have a xbox, but it has some tollerance so it should fit fine - in case it does not, i made the module from two parts , so the stand can be exchanged - please let me know if that is the case</li><li>updated profile REQUESTS - added plate 11 -one new mod  for DRAWER MAX. user @Nerraw asked for a method of separating the drawer into smaller spaces - i made a very simple method of doing that - 4 interconnectible separators that can also be printed individually or by neccesity i guess</li><li>updated profile REQUESTS - added plate 12 -one new module User @zach13 asked for a method of organizing documents vertically so this is my take on it. The iddea was to make it sturdy because it is a little tall and not to waste too much material - it is made from 3 pieces - a base plate and to organizing stands that fit slightly different from each other so that the papers will stay a little cuved to maintain vertical position</li></ul>&nbsp;UPDATE 6 - 15.02.2024<ul><li>updated profile REQUESTS - added plate 7  - Reinforced top plate for the DM. @bosho.liviu requested a top plate so modules could be placed on top - Now you can do that, it is symetric and compatible in every direction</li><li>updated profile REQUESTS - added plate 8,9  - Two new modules . @bdwilson asked for two modules that have removable interior trays - plate 8 has a new 1space tray module and plate 9 has a new tilted marker combo with one large tray on the bottom. The front part of the removable tray is also slanted for easy removal</li></ul>&nbsp;UPDATE 5 - 11.02.2024<ul><li>updated profile REQUESTS - added plate 5  - Tough Plate for the DM. @Heimwerkerbienchen requested a tougher top plate so monitor could pe placed on top of the DrawerMax - has all the toughness required bells and whistles but i really cant guarantee how it will hold up in time - in my oppinion the entire assembly should be printed in a tougher filament, because altough the new plate has a support structure, the drawer modules themselfs are pretty thin so the weight of the monitor will be on the walls</li><li>updated profile REQUESTS - added plate 6  - Half Bow ties. @bdwilson had a very good ideea to close the holes on exterior modules so introducing half bow ties </li></ul>&nbsp;UPDATE 4 - 28.01.2024<ul><li>updated profile REQUESTS - added plate 4  - Steps + Tape dispenser combo unit. altough it was not a request, the plate has the name of the user that gave me the ideea - thank you for that @lilrepete</li><li>the new module is compatible with existing ACCENTS, plus the security wheel and the blade can be printed in other colours to keep things fresh</li><li>the blade slides into the module and is interchangable in case teeth break or you just want another colour. if you feel it fits too tight just trim the seam of it and it will slide more easily</li></ul>UPDATE 3 - 23.01.2024<ul><li>updated the printing order to outer/inner - not a big issue but some had problems - now all is well</li></ul>UPDATE 2 - 22.01.2024<ul><li>added a new print profile called ACCENTS</li></ul>In keepign with the modularity theme and ultra customizability i aim to develop, i made some mix or match brims to add an extra touch of colour to your organizer. everything fits in place without glue or force and same as everything else it is easily changable in case you want to switch up your look and keep it fresh.photos attached in the profile so please check them out. i know the colours i actually printed are not the best but it was all the filament i have till i get my new shipment&nbsp;UPDATE 1 - 19.01.2024<ul><li>added a new print profile called DRAWER MAX</li></ul>it is a drawer module that occupies 4 slots, is stackable and also highly customizablethe first tray for it, as you can see in the pictures is for the spare parts that come with the BambuLab printer + some extras. Fits the parts for two printers.make sure you follow the instructions in its profile to get perfect fits everywhere<ul><li>added a new print profile called REQUESTS</li></ul>this profile contains the user requests for modules. each plate will have the users name on it. this is going to be the profile i will update regularly, based on requests.&nbsp;&nbsp;I’ve been wanting to do this project since I made the first desktop organiser.The problem I wanted to address was, what if in a month you want or need something else, more, or less space, something specific, more room for usb, cards, crayons, etc, how do you keep a new look with minimal to no effort?&nbsp;I’ve seen there have been many attempts to do this but none really took of, so I asked myself why? I think the main reason was lack of interest derived from lack of support. If newer modules aren’t created, interest goes down, and it becomes the same thing as a normal organiser.Of course we have the gridfinity system witch is great honestly and other similar to it, but they all rely on the same premise, a base to keep everything together, so if you are full, you need another base, but does the base you need right away exist? or are you going to be left with extra slots.&nbsp;Maybe I didnt do my research right, and there are other options, all I tried to do was to make something universal, easy to print, elegant, very customisable, and most of all, something that doesn’t depend on screws, magnets and on a base to keep it all tied. I printed 10 bowties In less than 20 minutes on standard, and hold together 7 modules (the ones I use) and you can lift and move them as a whole, without having them fall or break&nbsp;The bow tie joint isn’t my ideea, it’s been used in woodworking for centuries. It is a robust way of holding things together and works quite well here too, especially printed the way I arranged it on the plates . All the modules can be connected in whatever orientation you want, except the laptop stand, because it needs room on the small sides for the length of the laptop/tablet. But that is it - I kind of made that specifically for me, because I use it as an end piece that fits under my P1S (like my first organiser)&nbsp;I am starting with 12 modules and will make a new one every other week, based on suggestions I hope, because I dont think I have enough creativity. I will put out my own ideas because I do have more, but everyone has diferent needs so if you think you can get on board with the ideea I welcome all input, and I will try to make whatever you want. Remix culture is strongly encouraged.&nbsp;Modules in the 3mf:&nbsp;PLATE 1<ul><li>Usbcombo1 (11 usb sticks + 5 full size memory cards + tray for usb caps)</li><li>Phone combo (fits iphone 15 promax + airpods pro)</li><li>Post-its (two full size stacks of postits)</li><li>Steps (4 equal holders - superglue, ties, hex set, mini uv lamp)</li></ul>PLATE 2<ul><li>12 bow tie joints - enough for about anything</li></ul>&nbsp;PLATE 3<ul><li>Hex single - roomie organizer - can be further split with the splitters on plate 8</li></ul>&nbsp;PLATE 4<ul><li>Laptop wedge - macbook pro + ipad pro 12.9 + apple microfiber slot - made to be wedged under the x1 or p1</li><li>Laptop standard - - macbook pro + ipad pro 12.9 + apple microfiber slot + additional slot</li></ul>PLATE 5<ul><li>Tilted marker combo - 12 thick markers + pens and other + paperclip 3 + misc tray</li></ul>PLATE 6<ul><li>apple watch dock double - 2 apple watch charger pucks - like the original - cable management + full size post it tray</li></ul>PLATE 7<ul><li>Hex double - double the size of the single - can be further split with the splitters on plate 8</li></ul>PLATE 8<ul><li>5 split plates for the hex series</li></ul>PLATE 9<ul><li>apple watch dock single - 1 apple watch charger puck - like the original - cable management</li></ul>PLATE 10<ul><li>Usbcombo A - 6 usb sticks + 5 full size memory cards + tray</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

The Organizer

Stationary

Prestige Prototype

&nbsp;ssIntroducing the Modern Portable LED Lantern:Illuminate your space using our Portable LED Lantern – a sleek and stylish lighting solution powered by the Bambu Lab LED Lamp kit. This modern lantern is designed for versatility, perfect for both indoor and outdoor use.You can plug it into a portable battery, making it ideal for lighting up your surroundings on the go or around the house. Choose between a short or tall diffuser to tailor the lantern's aesthetic to your preference.The diffuser's unique tactile texture, achieved through the "fuzzy skin" feature, not only adds a distinctive touch to the lantern's design but also aids in diffusion, creating a soft and ambient glow.Compact, portable, and visually striking, this lantern is the perfect accessory for enhancing your outdoor adventures or creating a cozy atmosphere at home.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/476618/2024-01-29_c2e42f0b6a885.png"></figure>&nbsp;

Portable Lantern for Bambu Lab LED Lamp kit-001

Lights

KYZ Design

Dry up to 7 spool desiccant canisters at once in a filament dryer!&nbsp;<ul><li>Print in ASA, ABS or PETG to prevent the part sagging upon heating.</li><li>You will need two pieces of the same. There are finding features that align the two pieces, and one central desiccant holder will lock them together.</li><li>The external dimensions of this is based on a Bambu reusable spool and will fit in the AMS as well as all filament dryers (that I know of).</li><li>If you are buying indicating silica gel beads, the orange beads are the non-toxic ones and the blue ones are the toxic ones.</li><li>Leave an air gap in your filament dryer to let the moist air out when drying.</li></ul>Please feel free to upload print profiles for any of my uploads - for various printers, materials, etc.&nbsp;The desiccant PACKET holder I use in the pictures is <a target="_blank" href="https://makerworld.com/en/models/72591" rel="nofollow noopener">here</a>. This has a fine thread so they clamp the Bambu spools quite tightly - making “spool shims" unnecessary when refilling your spools.  <figure class="image image_resized" style="width:78.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/724478/2023-11-29_15419d570f1c88.png"></figure>&nbsp;The desiccant loose bead holder I use is <a target="_blank" href="https://makerworld.com/en/models/23470" rel="nofollow noopener">here</a>. Note that this remix has holes on the sides of the tube (among other changes) to make drying easier when they are outside of the filament spools - this is the primary reason I made the remix - to make drying easier.<figure class="image image_resized" style="width:78.66%;"><img src="https://makerworld.bblmw.com/makerworld/draft/724478/2023-11-29_256f89d3ca1f.png"></figure>If you want a loose bead holder specifically for Bambu spools, check out <a target="_blank" href="https://makerworld.com/models/179426" rel="nofollow noopener">this one</a>:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/724478/2024-03-18_e9981deb76fe38.jpeg"></figure>&nbsp;That is all, happy printing!

Desiccant Dryer Ferris Wheel

3D Printing tools

TheBear

<h3>Ho Ho Ho, and a Merry Christmas! </h3>Presenting the 5 gram Christmas Gift Bow!Easy to print, easy to assemble and easy to enjoy! Personally, I suck at making a nice bow on Christmas Gifts. I am, however, quite good at letting my 3D-printer do the work for me, while I sit back and relax. So, here we are! (Make sure to check out my <a target="_blank" href="https://makerworld.com/en/models/79308#profileId-86446" rel="nofollow noopener">Christmas Twisting Ornament</a>, for another great, low-weight Christmas print!) Update: A smaller version at ~3.4 grams is also available now!Be aware that the smaller version does require tighter bending, so the flexibility of your PLA needs to be even higher. I have tested it with a few of the regular PLAs I currently have in stock, and all worked fine. But your mileage may vary. Just be extra careful when bending. And if it keeps failing, consider just sticking to the standard version or follow the tip at the bottom of this description :-) <h2>Assembly</h2>Assembly is done by first feeding the top ribbon through the slots at the bottom, and then pressing it onto the circle mount in the middle (slightly bending the ribbon first does make the assembly a bit easier - please refer to my poorly filmed assembly video below). After that, the rest of the ribbons can be inserted under the middle and pressed onto the circle mount in any order, you like! The ribbons are supposed to be a bit tight, when pressing them onto the ‘circle mount’ - this is to ensure they stay in place, without having to glue everything in place. I wanted this bow to require no additional materials to assemble! <img src="https://makerworld.bblmw.com/makerworld/draft/275104/2023-11-22_30c06d4ef46c.gif"> If you find the fit to be a bit too tight or a bit too loose, please try changing the X-Y Hole compensation in the Quality-tab in the slicer: <img src="https://makerworld.bblmw.com/makerworld/draft/275104/2023-11-22_100b874fe1c26.png"> Now all that is left to do, is to attach the bow to the gift using some glue/tape/etc. <h3>Filament to Use</h3>I've personally succesfully printed and assembled the bow with both cheap, generic PLA, brand name PLA, PLA+, High-Speed PLA, etc. However, Silk PLA, Matte PLA and other “special” types of PLA might not work as well, as they can be too brittle to bend like this. You could try placing the print on the hot bed, set to 70-80 degrees, to heat up the bow after it has been removed from the build plate. That will soften up the PLA and might make assembly with these materials possible. I personally haven't tested this yet, so I won't guarantee anything :-) Shout-out to Paul Elrod for this idea of heating up the print using the hot bed prior to assembly. If you have issues with the ribbons creasing/breaking, it is often due to how the lines line up with the bend. Changing the Top and Buttom Surfaces to either Concentric can mitigate this issue. Increasing your wall count is also one way of making the print stronger! Merry Christmas and Happy Printing!

Christmas Gift Bow (Foldable)

Decoration

mcmaven

This is a 3D-printed model of a triple-axis tourbillon, which is based on the tourbillon in a Jacob and Co. Twin Turbo Furious watch. A tourbillon is a mechanism employed to counteract the effects of gravity within a watch. This intricate model includes an escape wheel, triple-axis outer frame, and a base with an integrated motor. It functions on the same fundamental principles as a traditional watch tourbillon.&nbsp;With precise assembly and calibration of the escape wheel, spring, and base drive gear, this tourbillon can smoothly rotate in three axes and maintain accurate timekeeping. The provided print settings in the Triple-axis Tourbillon Model for Kit-007.3mf file are already customized to ensure that all screw holes are clear and ready for assembly.&nbsp;Printed plastic ‘screws’ are printed to scale and used as caps to cover the steel screws that actually hold it together.<a target="_blank" href="https://youtu.be/2-7S2i6AUyM" rel="nofollow noopener">Here </a>is a real-time video of the tourbillion in action.&nbsp;Note: There are two different designs defined for the Tourbillon: the 3MF version and the STL version.&nbsp;The 3MF (Triple-axis Tourbillon Model for Kit-007.3mf file) version was designed specifically to work with Bambu printers and the Bambu slicer, and uses the Triple-axis Tourbillon Model Hardware Kit motor to drive it. It is a slightly modified version of the original STL tourbillon version. To build the 3MF version you only need to order the <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a>, which provides all the non-printed parts (screws, bearings, shafts cut to length, motor, etc.) needed to build a complete model. <a target="_blank" href="https://www.youtube.com/watch?v=HRNbihDXNwE" rel="nofollow noopener">Here </a>is a video of assembling the 3MF version with the Bambu 007 hardware kit. Note that some of the sections in the Furious Build Notes PDF file below also apply to assembling the 3MF version, with the primary difference being the construction and components of the Base and the drive mechanism.&nbsp;The STL (Raw Model Files) version is a set od files that was designed to work with any printer or slicer. It also uses a more complex Arduino controlled stepper motor mechanism to drive it. To build the STL version you can order a kit of all the non-printed parts <a target="_blank" href="https://www.makerrx.com/collections/projectkits/products/twin-turbo-furious-tourbillon-kit" rel="nofollow noopener">here</a>, otherwise you will need to order the parts listed in the Furious Build Notes PDF instructions individually. If you order the STL version of the hardware kit or buy the parts yourself, you will need to program the firmware into the Arduino before it will work. The Furious Build Notes PDF file below, describes the assembly process for the STL version. For some of the larger parts, ‘full’ (e.g., Base Outer Ring.STL) and ‘split’ versions (Base Outer Ring a.STL and Base Outer Ring b.STL) of the same part are included. The ‘full’ parts require at least a 220x220 bed for printing. The ‘split’ parts may be printed separately on a diagonal on a smaller bed, then glued together to form the larger part.&nbsp;The following filaments can be used to create a model that looks like the pictured gold, silver, copper and black version:<ul><li><a target="_blank" href="https://shrsl.com/4cim5" rel="nofollow noopener">PLA Silk Gold</a></li><li><a target="_blank" href="https://shrsl.com/4cim4" rel="nofollow noopener">PLA Silk Silver</a></li><li><a target="_blank" href="https://shrsl.com/4cim3" rel="nofollow noopener">PLA Silk Copper</a></li><li><a target="_blank" href="https://shrsl.com/4cim2" rel="nofollow noopener">PLA Basic Black</a></li></ul>Here is a video of the construction of the 007 kit. And some sections in the Furious Build Notes.PDF file may be useful for constructing the 007 kit.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=bHEU9rnnu88"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/bHEU9rnnu88" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Triple-axis Tourbillon Model Components Kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;The Hardware Kit for the Triple-axis Tourbillon Model for Kit-007.3mf file can be found here: <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a><a target="_blank" href="https://shrsl.com/4cfzj" rel="nofollow noopener">.</a>

TT Furious Tourbillon

Things to build

OldSalty3D

Just little replacement feet/pads for the bottom of the Bambu Labs Wireless Mouse Kit (<a target="_blank" href="https://makerworld.com/en/models/13716#profileId-20115" rel="nofollow noopener">Wireless Mouse 002 by Bambu Lab - MakerWorld</a>). The kit comes with 4 adhesive pads that are stuck to the bottom of the mouse. These are actually needed for the mouse to work.&nbsp;I wanted to print multiple shells so that I could swapped them out for a different color every now and then. These feet print in just a few minutes and can be printed in any color you like, then just glue them to the bottom of the mouse. No need to buy any more adhesive feet whenever you want to print your mouse in a different color or material.