Meet the ultimate heavy-duty, anti-rattle dash mount! I engineered this fully parametric OpenSCAD model to securely bridge a vehicle console slot and a radio head unit. It features an advanced variable-radius geometric loft, a 3mm step-up front junction for clean faceplate clearance, and an 8mm thick base. Best of all? It has maximized internal cavities. Pause your print at Z=79.5mm, fill it with BBs and epoxy, and seal it for a rock-solid, weighted ballast mount that won't vibrate!

Meet the ultimate heavy-duty, anti-rattle dash mount! I engineered this fully parametric OpenSCAD model to securely bridge a vehicle console slot and a radio head unit. It features an advanced variable-radius geometric loft, a 3mm step-up front junction for clean faceplate clearance, and an 8mm thick base. Best of all? It has maximized internal cavities. Pause your print at Z=79.5mm, fill it with BBs and epoxy, and seal it for a rock-solid, weighted ballast mount that won't vibrate!

Golf cart rocker switch pod with a curved front profile and flat rear mounting face. Includes an open center cavity for wiring, side mounting ears, 5 mm mounting holes, and 8.2 mm x 1 mm recessed pockets for flush rivnut installation. Designed in OpenSCAD and customizable.

5-Gallon Bucket Self-Watering Insert (2-Piece Print) A DIY 2-piece insert for turning a standard 5-gallon bucket into a simple self-watering planter. Designed to print in two halves and glue together, it features a tapered shape, top slits and holes for drainage and soil support, an open bottom, lower sidewall holes, and a snug 1-inch PVC fill-tube guide. Sized around a bucket bottom near 250 mm. PETG recommended for outdoor or wet use.

The original Satellite 1 UFO case designed by 9and3r was my favorite but i lacked a speaker. I designed and added a speaker enclosure and fused his design into one piece.

A compact, rounded cap designed to hold two Ø8 mm round neodymium magnets in side-insert pockets, so the magnetic faces sit just 0.8 mm behind the front surface for stronger field at the target device. Includes tolerance variants (7.8/7.9/8.1 mm) for press-fit or glue, plus tunable parameters for body size, wall thickness, magnet thickness, and center-to-center spacing. Ideal when a forward-facing magnet won’t trigger reliably—rotate the field 90° and bring it closer without exposing the magnet.