Leif H.

braga3dprint

Introducing my latest design: a super cute and simple bunny lightbox! 🎉 Whether you&#39;re a fan of adorable decor pieces or looking for a fun project to try out, this bunny lightbox is perfect for you! 🌟 If your the video or files were useful consider boosting, it&#39;s free!&nbsp;The raw files for both lightbox and filament settings are available and ready to be imported into Bambu Studio. However, to ensure the best results for your prints, I highly recommend running your own filament calibration. &nbsp;Dry Your Filament: Ensure your filament is properly dried before calibration. Flow Rate and Flow Dynamics Calibration: Fine-tune your flow rate and flow dynamics settings to optimize filament extrusion. Temperature Towers: Conduct temperature towers to find the ideal temperature for your filament. Feel free to experiment with my settings, but don&#39;t forget to run your own calibration tests to achieve the perfect results for your lightbox creations!&nbsp;But wait, there&#39;s more! 🎥 I&#39;ve also created a step-by-step tutorial on YouTube showing exactly how to make this exact model. If you&#39;re interested in learning how to create your own bunny lightbox, feel free to check out the tutorial here:&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/6VUHmFcwIGM?si=h885dFnr8B7Oq5uC"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/6VUHmFcwIGM" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Happy crafting, everyone!

Lightbox Tutorial Easter Bunny Lightbox LED Lamp

Decorations

planes01

<h3>Model</h3><h3>Overview</h3>SR-71 kit card that was created to showcase a true aviation engineering marvel and is an inspiration for kids and adults of all ages in pursuit of science, technology, engineering, and math (STEM). This particular model uses color and sliced 3D format to really bring a highly contoured airplane to life upon assembly. The kit format is great for gifting the model to engineering clubs, friends, family, or coworkers that enjoy building and showcasing aviation engineering history. The kit includes a stand that is assembled to display the model.&nbsp;Check out the <a target="_blank" href="https://makerworld.com/en/models/199176" rel="nofollow noopener">SR-71</a>, <a target="_blank" href="https://makerworld.com/en/models/242106" rel="nofollow noopener">B-52</a>, <a target="_blank" href="https://makerworld.com/en/models/436445" rel="nofollow noopener">A-10</a>, <a target="_blank" href="https://makerworld.com/en/models/402126" rel="nofollow noopener">787</a>, and <a target="_blank" href="https://makerworld.com/en/models/405459" rel="nofollow noopener">Darkstar</a>!Check out the full airplane kit card collection → <a target="_blank" href="https://makerworld.com/@planes01/collections/991821" rel="nofollow noopener">linked here</a>!<h3>Profiles</h3><ul><li>Small Kit with Frame<ul><li>small plane kit with frame ideal for gifting to others</li></ul></li><li>Large Kit with Frame<ul><li>large plane kit with frame ideal for gifting to others</li></ul></li><li>Small Model Pieces<ul><li>small plane without frame ideal for assembly right off the printer</li></ul></li><li>Large Model Pieces<ul><li>large plane without frame ideal for assembly right off the printer</li></ul></li></ul><h3>Filament</h3>As shown:<ul><li>Bambu Lab PLA Black</li><li>Overture PLA Cement Gray</li><li>Overture PLA Space Gray</li><li>Esun PLA+ Fire Engine Red</li></ul><h3>Tips</h3><ul><li>Model requires close tolerances to ensure snug but not tight or loose fit<ul><li>Make sure the model cools to room temperature before assembly</li><li>Ensure filament is properly calibrated with no excessive over extrusion</li></ul></li><li>Ensure good bed adhesion<ul><li>Make sure printer is fully calibrated</li><li>Make sure print bed is clean &amp; dry (soapy water is my favorite for cleaning - simple &amp; works)</li><li>Make sure filament is dry (wet filament can generate non-continuous flow that can cause bed adhesion issues)</li><li>Cooling &amp; Temps - make sure they are correct for your printer, build plate, and filament</li></ul></li></ul><h3>Assembly</h3><ul><li>Remove all pieces from the kit</li><li>Debur as needed to smooth edges</li><li>Insert connector between engine halves<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_81f8b94fa9812.jpg"></li></ul></li><li>Press engine halves together<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_499c3e2a6c543.jpg"></li></ul></li><li>Insert engine into fuselage (snaps together). Note LHS &amp; RHS engine positions below!<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_5e37007ed5a03.gif"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_2572f2daa805a.jpg"></li></ul></li><li>Insert outboard wing into engine (snaps together)<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_582fe33443f7.jpg"></li></ul></li><li>Insert vertical tail into engine (snaps together; recommend to insert aft end of vertical tail first and then press down on forward end)<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_02853c5841433.jpg"></li></ul></li><li>Place airplane onto stand<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-25_3244aa356b7fb.jpg"></li></ul></li><li>Enjoy!</li></ul>&nbsp;<h3> FAQ</h3><ul><li>How do you make the airplane kit card models?<ul><li>Fusion 360! All of my models are created by me in a CAD environment. I love to design &amp; print my creations!</li><li>Here is a view of this SR-71 model showing sketches &amp; bodies!</li><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-03-05_8bcb3d1b0e6e1.png"></li></ul></li><li>How can I learn how to make kit card?<ul><li>Learn the tools &amp; keep exploring! (YouTube is a great starting place)</li><li>The basic steps:<ul><li>Create sketch for each of the major components: wing, fuselage, vertical tail, joints, etc..</li><li>Create solid bodies using those sketches (extrusions, lofts, etc…)</li><li>Add any details like blends, fillets, chamfers</li><li>Create the stand over the center-of-gravity (note the maker point on the image above!)</li><li>Fine tune tolerances in the joint (here is where a lot of 3D printing prototyping comes into play!)<ul><li>Fun Fact: This SR-71 had 6 prototypes before publishing to the community</li></ul></li><li>Add kit frame</li></ul></li></ul></li></ul>

SR71 Kit Card

Models

SnapPrint3D_SuperCrazyPrints

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready! <a target="_blank" href="https://www.supercrazyprints.com/" rel="nofollow noopener">https://www.supercrazyprints.com/</a>&nbsp;Check out my other models: <a target="_blank" href="https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models</a>

Pokemon-Chibi Eevee (NO SUPPORT)

Figurines

jajaum3d

🌟 Support My Work &amp; Unlock Exclusive Benefits!🌟 Become a patron on <a target="_blank" href="https://www.printables.com/@jajaum3d#join:64" rel="nofollow noopener">Printables.com</a> and gain access to early releases, commercial licenses, and more.  See all my designs on cults: <a target="_blank" href="https://cults3d.com/en/users/jajaum3d/creations" rel="nofollow noopener">https://cults3d.com/en/users/jajaum3d/creations</a> All my designs are protected by Copyright Law. Purchasing does not grant the right to sell any digital file or printed model of my designs without explicit consent. Please respect the hard work of 3D artists by never sharing or selling digital files.  <figure class="table" style="width:98.41%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td colspan="3"><h3>Support and Access Exclusive Designs</h3>This model is available for free, but you can choose to make a small donation and receive one of these exclusive variants. Alternatively, you can join the <a target="_blank" href="https://www.printables.com/@jajaum3d#join:64" rel="nofollow noopener">Printables Club</a> to access all these models and many more.</td></tr><tr><td><a target="_blank" href="https://cults3d.com/en/3d-model/gadget/iron-suit-edition-mobile-exo-suit" rel="nofollow noopener">Iron Suit Edition</a></td><td><a target="_blank" href="https://cults3d.com/en/3d-model/gadget/captain-s-legacy-edition-mobile-exo-suit" rel="nofollow noopener">Captain&#39;s Legacy Edition</a></td><td><a target="_blank" href="https://cults3d.com/en/creations/battle-mech-edition-mobile-exo-suit" rel="nofollow noopener">Battle Mech Edition</a></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2024-04-18_bc423fbf322cf.gif"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2024-04-18_c737f9d76a7dd.gif"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2024-04-18_7509d2a60bb71.gif"></figure></td></tr></tbody></table></figure><h3> Introducing the Mobile Exo-Suit: Your Phone&#39;s Ultimate Armor</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_ateqzu20qo45.gif"></figure>This unique design combines functionality and style, resembling an exoskeleton or suit of armor for your device.The Mobile Exo-Suit is ingeniously designed to adapt to different phone sizes, ranging from 70mm to 95mm, ensuring a perfect fit for various smartphones. Once placed on the stand, your phone gains arms and legs, giving it a playful and dynamic appearance. Not only that, but the hands of the exoskeleton conveniently hold your charging cable when not in use, keeping everything organized.The core structure of the Mobile Exo-Suit serves as the base, providing stability and support, while an additional armor layer enhances its aesthetic appeal, allowing you to personalize your device in style. The Mobile Exo-Suit adds a touch of elegance to your mobile experience.Experience the ultimate combination of functionality and style with the Mobile Exo-Suit - a worthy place for your beloved device.No paint, no supports and no glue needed.<h3>Printing Instructions</h3>Files in STL format to print without any support or brim and already in the best orientation. Recommended layer height: 0.2mm.<h4>Files to print organized by color:</h4><a target="_blank" href="https://www.prusa3d.com/product/prusament-pla-viva-la-bronze-blend-970g/" rel="nofollow noopener">Prusament PLA Blend Viva La Bronze</a><ul><li>Body-v2.stl</li><li>Arms-v2.stl</li><li>Legs-v2.stl</li></ul><a target="_blank" href="https://www.prusa3d.com/product/prusament-pla-prusa-galaxy-black-1kg/" rel="nofollow noopener">Prusament PLA Prusa Galaxy Black</a><ul><li>Armor.stl</li></ul>Individual files and a tolerance test also included<h4>Tips</h4><ul><li>The body needs good bridges and a good first layer to print well.</li><li>Print the legs for strength, increase walls and infill.</li><li>Put the armor before joining the arms and legs to the body, don&#39;t mix left and right parts.</li><li>On the forearm armor, put the elbow first <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_6b4i1thveb1j.gif"></li></ul><h4>Bed adhesion problems?</h4><ul><li>Disable the Elephant foot compensation setting it to 0, as the model already has it.</li><li>To put brim on everything is really annoying to remove later. This technique allows you to put it only on critical parts and in an easy way to remove later:<ul><li>Right click on the model and select “Add part&gt;cilinder”</li><li>Scale it to 0.2mm heigth, edit only the height and click on “drop to bed” to make it flat in the bed</li><li>Now drag it to under the hand for example and you&#39;re done. Repeat the process to any pat that you want an extra adhesion. You can use and scale shapes as your needs.</li></ul></li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_05osbsvfx5ow.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_kb21fikz1bow.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_wlztzmtn12tj.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_1hkki7rel13j.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000049016/design/2023-10-24_tjx12dzxbo1p.jpg"></figure>

Mobile Exo-Suit

Apple

Procs Design

This is a decorative foldable gift box which you can use to gift small presents, decorate your desk, put under a tiny Christmas tree, store candies, and whatever you can think of. This design features a box base and a lid that fit together. I designed it so that it requires no glue, tape or screws; minimal purge waste to print; different designs to choose from; and two sizes, the smaller one being able to fit on an A1 mini. It uses a single layer thin living plastic hinges and tabs that allow you to fold and snap it together to a sturdy box (as sturdy as a thin layer of plastic that is) and is surprisingly strong! Since it prints flat and folds up, the designs can come from Hueforge and only requires multicolor filament changes at layers which significantly reduces purge waste! This also means that an AMS is not required but is helpful. Unfortunately, the sizes are a bit small as you can only fit so much of a foldable design on the print bed.&nbsp;Sizes (interior volume):<ul><li>Normal (Printable on X1C, P1S, P1P, A1): 7.5cm x 7.5cm x 7.5cm (2.95 in x 2.95 in x 2.95 in)</li><li>Small (Printable on X1C, P1S, P1P, A1, A1mini): 5cm x 5 cm x 5cm (1.96 in x 1.96 in x 1.96 in)</li></ul>&nbsp;Print instructions:<ul><li>Designs are separated by profiles, each pattern has two versions. One for the X1, P1, A1 printers, and one for the A1mini. The A1mini can only fit the small size while the X1, P1, A1 versions have both sizes! Read the description carefully and select the correct design you want. Make also sure to select the correct plates of the size you are interested in.</li><li>If you have an AMS, use only the AMS plates in the profiles! If you don't have an AMS, use the pause swap plates. When using the pause swap plates, it will pause at the color changes. Simply unload and load a new color filament and resume the print. The profile description has a description of the order of colors so make sure to read them.</li><li>All you need to do is decide on a pattern to print, then select my appropriate profile. Afterwards choose what plate you want to print, each plate will have a different part, size, and AMS requirement. Do not increase the number of copies as it will auto rotate the models which may cause the living hinges to fail.</li><li>Tolerances are tight for this model due to the living hinges. Please make sure that your printer can handle a 0.15mm gap. Otherwise it may be a bit difficult to bend the hinges or it may fuse together.</li><li>Make sure that your first layer bed adhesion is good, the living hinges are on the first layer and any first layer defect may affect the bend-ability.</li><li>Check back every now and then, I will be updating this box with more designs as I test and print them!</li></ul>&nbsp;Assembly InstructionsWhen removing your print from the print bed, please be gentle and slow. The living hinges are thin and can be torn off if you aggressively remove the print. If using a textured or hot plate, please wait for the plate to cool completely first before removal. If using a plate with high adhesion where you need to peel or pry it off because bending the plate doesn’t work, consider using a medium for easy release like a glue stick or hair spray. Please see documentation for bigger versions of these pictures.&nbsp;<figure class="image image_resized" style="width:50.36%;"><img src="https://makerworld.bblmw.com/makerworld/draft/531581/2023-12-31_c5d5f24f17c788.png"></figure><figure class="image image_resized" style="width:49.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/531581/2024-01-15_afe3359d3d038.png"></figure>&nbsp;Designs:Spiral Pattern: Two colors, simple and fast printPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu White (background, can be any color you want)</li><li>PLA Sunlu Red (Spiral stripes, can be any color you want)</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Snowflake Pattern: Two colors, simple and fast printPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu White (background, can be any color you want)</li><li>PLA Sunlu Black (Snowflakes, can be any color you want)</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Maze: Two colors, simple and fast printPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu White (background, can be any color you want)</li><li>PLA Sunlu Blue (Maze walls, can be any color you want)</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Poinsettia Pattern: Three colors, simple and fast printPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu White</li><li>PLA Sunlu Red (Petals)</li><li>PLA Sunlu Grass green or Green (Leaves)</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Ornaments: 3 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Grass Green (Ornament color, any base color should work like red or blue)</li><li>PLA Sunlu White</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Snowy Trees: 4 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Grass Green</li><li>PLA Overture Matte Light Blue</li><li>PLA Sunlu White</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Watercolor Snowflake: 4 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Blue</li><li>PLA Overture Matte Light Blue</li><li>PLA Sunlu White</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Starry Night: 4 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Blue</li><li>PLA Sunlu White</li><li>PLA Overture Matte Yellow</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Blue Marble: 3 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Blue (or any base color you want your marble to be)</li><li>PLA Sunlu White</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;&nbsp;Great Wave: 3 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Blue</li><li>PLA Sunlu White</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Hearts Pattern: Three colors, simple and fast printPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu White </li><li>PLA Sunlu Red (lower hearts)</li><li>PLA Sunlu Sakura Pink (upper hearts)</li></ul>&nbsp;Swap Instructions:<ul><li>Start with White </li><li>At layer #5 (1.0mm) swap to Red or Pink (lower hearts)</li><li>At layer #8 (1.6mm) swap to Pink or Red (upper hearts)</li></ul>&nbsp;Basic Box and Basic SLIM Box: The basic box, no design on the walls for easy remixing or customizing.Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmAny color you want.Note the model differences:<ul><li>Basic Box has a wall thickness of the base at 2mm as all lids are designed to fit on a box that size.</li><li>Basic SLIM box has a lip of 2mm for the lid and the rest of the walls are 1mm for your remixing or sticker needs, choose that one if you want to add some depth to your box.</li><li>All lids are 1mm thick in this set, as nothing requires them to be thicker.</li><li>Keep in mind how it bends when adding details to the 3d model.</li></ul>&nbsp;&nbsp;Want to slice these files yourself?While I recommend you use the profiles I have prepared and tested, you can slice it yourself if you follow these recommendations:<ul><li>For all projects, make sure to print at 100% infill, it is thin enough that having sparse infill can cause surface defects with a minor reduction in filament used which is not worth it.</li><li>For all projects, the first layer must be 0.2mm thick, the living hinges are designed based on that thickness.</li><li>For any boxes that include Hueforge designs, please print layer height of 0.1mm with a base layer of 0.2mm.</li><li>Do not rotate the files or change the first layer infill pattern, the infill pattern must be 45 degrees to the walls of the model to allow the thin living hinge design to work well.</li><li>I do not recommend scaling the model, it has tight tolerances on the living hinge and Hueforge designs are optimized at a specific scale.</li></ul>&nbsp;Update Log2023/11/23 Release with 4 designs: Spiral pattern, Watercolor snowflake, Ornaments, Snowy trees2023/11/27 Update with 4 new designs: Snowflake pattern, Maze, Poinsettia pattern, Starry Night2023/12/03 Update with 1 new design and opened remixes: Basic Box + SLIM2023/12/31 Update with 2 new designs: Great Wave and Blue Marble2024/2/11 Update with 1 new design: Hearts Pattern

Foldable Gift Box Decorative

Houshold

franceschellifederico

NOTE: USE MY PRINT PROFILE FOR BETTER RESULTS! NOTE2: TOLLERANCE ARE CALCULATED FOR BAMBU PLA. If you have any suggest, please don't esitate to leave a comment :)Tip: Print the body and the final part in two different times if you don't want to waste time due to the AMS filament change :oA re-usable scraper with a different end for any purpose!I've designed a 3D-printable scraper tool that serves multiple purposes: cleaning and removing models from the printer bed after use and also for removing ice from car windshields during winter! What's unique about my scraper is the interchangeable end piece, offering a choice between three models: one for cleaning the printer bed, another for lightly iced glass, and the third for heavily iced glass.Additionally, there's a slot (on the back) for 15x3mm magnets, allowing it to be attached to the side of the printer.Green: lightly iced glass, Blue: heavily iced glass,Orange: cleaning the printer bed.<figure class="image image_resized" style="width:45.15%;"><img src="https://makerworld.bblmw.com/makerworld/draft/415361/2023-12-04_f69102c74a9f4.png"></figure><figure class="image image_resized" style="width:36.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/415361/2023-12-04_8dadcc53d026c.png"></figure><figure class="image image_resized" style="width:30.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/415361/2023-12-04_601fad618ca39.png"></figure>&nbsp;&nbsp;

Scraper v1

Tools

LinkDesigns

<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/155573/2023-11-07_qsrc0l2l3i3m.gif"></figure>I've made a couple of designs based on this idea before, but I realized that more segments = more fun, so now there's 35 😂 This design twists, expands, and collapses in a really neat way, and the segments can actually be separated and stacked as well! This model can be scaled up or down to preference, but be sure your build plate adhesion good. If you want to test this print with a smaller one first, there's a standard size model included. &nbsp;Happy printing!&nbsp;If you like this fidget, consider checking out my Finger Slinger design as well! <a target="_blank" href="https://makerworld.com/en/models/58825#profileId-63053" rel="nofollow noopener">Finger Slinger - Print In Place Spinning Fidget by LinkDesigns - MakerWorld</a>&nbsp;

Hexagon Superfidget - 35 segment PIP design

Toys

Magic Studio 3D

"The Grinch 3D Model" 🎄🌟&nbsp;Step into the whimsical world of Dr. Seuss with this captivating Grinch 3D model! Inspired by the beloved character, this intricately designed piece brings the mischievous charm of The Grinch into your holiday decor.&nbsp;⚠️ For larger models, remove the purge line at the beginning of printing! ⚠️&nbsp;Bambu Studio Settings: The settings are just a recommendation, however you can print with the settings you are already used to using! • Preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 • Quality → Wall generator → Arachne • Quality → Wall transitioning threshold angle → 50º • Strength → Advanced → Infill/wall overlap → 20% • Quality → Advanced → Avoid crossing walls • Increasing retraction / reducing temperature can help reducing wisps • I recommend always starting with the lighter colors. Recommendations before and after printing:&nbsp; • Use textured PEI sheet • To make the hole for the USB cable input for the LEDs, you can do it with a soldering iron, drill a hole or you can do it with a slicer by adding a negative model in the place where you want to make the hole • For the pieces to give more light, I recommend using aluminum tape on the inside of the back cover • Be careful to clean the table well&nbsp;Materials and tools used to assemble parts:&nbsp; • Aluminum Tape for the back cover • Hot glue pistol to place in the spacing of the LEDs so they don't come off • Soldering iron to make the hole for the USB cable and/or to solder the LEDs with the USB cable with ON/OFF switch • White or RGB LEDs&nbsp;To find out the list of all the components I use, you can click on the link in my description, and you will find it in the first post!

The Grinch Lightbox LED Lamp

Lozagon1234

Introducing "The Ultimate Carabiner," a versatile 3D model designed to elevate your everyday adventures. This sleek and robust carabiner is perfect for attaching and securing items, adding a touch of functionality and style to your daily life.Modern and Sturdy Design: "The Ultimate Carabiner" boasts a modern and sturdy design, combining form and function seamlessly. Crafted with precision, this carabiner is engineered for durability, ensuring it can handle a variety of tasks with ease.Multipurpose Attachment: Versatility is key, and "The Ultimate Carabiner" is designed for a range of uses. Attach it to your backpack, belt loop, or keychain for quick and convenient access to your essentials. The smooth and reliable mechanism ensures a secure hold.Warning: Not for Climbing: Please note that "The Ultimate Carabiner" is designed for general-purpose use and is not suitable for climbing or activities where personal safety is a concern. This carabiner is intended for everyday tasks and should not be used in situations where a failure could result in injury.Easy 3D Printing: Designed for simplicity, this 3D model is optimized for easy printing on standard 3D printers. The user-friendly design ensures a straightforward printing process, allowing you to create your "Ultimate Carabiner" effortlessly.Customization Possibilities: Express your individuality by experimenting with different filament colors to match your personal style. The sleek design of "The Ultimate Carabiner" allows for easy customization, making it a practical and personalized accessory.Perfect for Everyday Adventures: Whether you're an outdoor enthusiast, traveler, or someone who values practicality, "The Ultimate Carabiner" is the perfect companion for your daily adventures. Enhance your gear with a reliable and stylish attachment solution.Explore More: Download "The Ultimate Carabiner" 3D model now and add a touch of functionality to your everyday carry. Explore our website for more practical and stylish 3D models that cater to your lifestyle.

The Ultimate Carabiner V1.0

Utilities

Geek3Designs

HAIL TO THE VICTORS! With the recent Rose Bowl win for Michigan I had to rework my orginal block M. Please enjoy this Rose Bowl themed Block M for Leaders and Best! GO BLUE!

University of Michigan - Rose Bowl Lightbox

Sports

Tekk3D

Under Desk Plate Holder (3, 4 & 5 Plates)&nbsp;with Drilling Template!

Plate Holder Under Desk (3, 4 & 5 Plates) with Drilling Template

X1C Mods

Inspired by the Citadel pot holders, these are sized for their paint pots. It's a fairly tight fit, intentionally. I've updated this set with a range of different size, from the original design I made a few years ago. This includes:<ul><li>Changed the border walls to be 2.4mm. This works nicely with both 0.4mm nozzles but also 0.6mm nozzles</li><li>Also made the walls slightly taller</li><li>Reduces the bottom thickness to 1.2mm (so, 6 layers at 0.20mm)</li><li>Added the 6-, 7-, and 10-pot designs from the original 3 and 4 pots</li></ul>This prints very well with TPU, but any other material would work too (but not as easy to insert and remove the pots).<h4>Updates</h4><ul><li>2022-12-28: Added the Fusion 360 file for editing</li><li>2022-11-18: Added the 19-pot version.</li></ul><h4>Feedback welcome!</h4>Let me know what works, and what doesn't. Maybe you have a different paint line you would want these for?

Paint Pot Holder

Painting

Chris Pirillo

Introducing the adorable 3D printable Baby Yoda (Grogu) model, a must-have collectible for Star Wars fans and 3D printing enthusiasts alike. This captivating design perfectly captures the irresistible charm of the beloved character from the hit series "The Mandalorian."Original image generated in MidJourney, STL’ed in HueForge.&nbsp;This meticulously crafted flat model brings Baby Yoda to life with astonishing accuracy. The intricate details of Grogu's endearing facial features, large round eyes, and pointy ears are flawlessly replicated, showcasing the remarkable craftsmanship of the design. Or… close enough.&nbsp;Once printed, this Baby Yoda model becomes a versatile addition to your Star Wars collection. Display it on your desk, shelf, or even use it as a charming decoration for special occasions. Its flat design allows for easy placement and transportation, making it an ideal gift for fellow Star Wars enthusiasts or anyone captivated by the lovable creature from a galaxy far, far away.&nbsp;Let this 3D printable Baby Yoda (Grogu) model bring joy and a touch of Star Wars magic into your life. Whether you're a fan of the series, an avid collector, or simply looking for an exciting 3D printing project, this model is sure to delight and impress everyone who encounters it.&nbsp;Obviously, this description was written in AI, too. LoL&nbsp;I sliced this at a .08mm layer height. <ul><li>Black to layer 4</li><li>Dark grey to layer 6</li><li>Light grey to layer 25</li><li>White to layer 38</li></ul>

Star Wars (Inspired) "Yoda Baby for Me" HueForge Grogu

HueForge

Samwiseg0

Since many of the new Chamberlin/LiftMaster garage door openers do not have removable light covers, including mine, I decided to make an enclosure to prevent any shorts and keep the PCB properly protected.This is an enclosure for the <a target="_blank" href="https://github.com/PaulWieland/ratgdo" rel="nofollow noopener">ratgdo v2.x</a> PCB. It features a removable snap fit lid which is also reversible. <img src="https://media.printables.com/media/prints/602600/rich_content/7a75556f-6523-4950-b050-cae79af557f7/thumbs/inside/1600x1200/png/assembly.webp?image_process=format,webp?image_process=format,webp">&nbsp;There are 2 sets of STL options.<ul><li>Heat Insert (Recommended)</li><li>M3 Self Tapping (Screws go directly into the plastic)</li></ul><h4>Mounting Methods</h4><ul><li>Magnets!</li><li>Screw mount with back strap to be able to mount using preexisting punched/slotted angle</li><li>Zip tie</li></ul><h4>Bill of Materials:</h4><ul><li>2x or 4x - <a target="_blank" href="https://www.aliexpress.com/item/2255800046543591.html?spm=a2g0s.9042311.0.0.21164c4dGhWHhY&gatewayAdapt=4itemAdapt" rel="nofollow noopener">Heat Set Inserts (M3x5x4)</a> (<a target="_blank" href="https://kb-3d.com/store/inserts-fasteners-adhesives/278-brass-heat-set-threaded-insert-for-plastic-m3x5x4mm.html" rel="nofollow noopener">USA Option</a>) (<a target="_blank" href="https://www.amazon.com/ruthex-Threaded-Inserts-VORON-Components/dp/B0CDH36ZMX" rel="nofollow noopener">Amazon</a>)<ul><li>Only needed for the heat insert version</li><li><a target="_blank" href="https://www.amazon.com/Virtjoule-Heat-Insert-Tips-Sizes/dp/B08B17VQLD" rel="nofollow noopener">Heat insert tool</a> (Optional)</li><li><a target="_blank" href="https://kb-3d.com/store/tools-equipment/400-ldo-m3-heatset-insert-tool-kit-1639077653902.html" rel="nofollow noopener">Kit option</a> (Includes tool and heat inserts)</li></ul></li><li><a target="_blank" href="https://www.amazon.com/gp/product/B00HA2ARZO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1" rel="nofollow noopener">4x - 6mm x 3mm magnets</a><ul><li>Optional</li></ul></li><li><a target="_blank" href="https://www.amazon.com/Socket-Screws-Machine-Thread-Quantity/dp/B07NTG92SL/ref=sr_1_1?keywords=m3x8+shcs&qid=1660863368&sprefix=m3+x8+shc%2Caps%2C80&sr=8-1" rel="nofollow noopener">2x - M3 x 8mm SHCS Screws</a></li><li><a target="_blank" href="https://www.amazon.com/Socket-Screws-Bolts-Thread-100pcs/dp/B07CMQK4M6" rel="nofollow noopener">2x - M3 x 14mm SHCS Screws</a><ul><li>Only used for back strap mounting to preexisting punched/slotted angle</li></ul></li><li>Zip ties - 2mm wide recommended.</li></ul><h4><a target="_blank" href="https://ko-fi.com/samwiseg0" rel="nofollow noopener">If you like my work</a></h4><a target="_blank" href="https://ko-fi.com/samwiseg0" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/470673/2024-01-28_3dd1a2ef419cf8.png"></a><h4> </h4><h4><a target="_blank" href="https://watchtower3d.etsy.com/" rel="nofollow noopener">Don't have a 3D printer or just want a complete kit?</a></h4><a target="_blank" href="https://watchtower3d.etsy.com/" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/470673/2024-01-28_5e49e4f2f8319.png"></a>