Zekey3

dakjones82

<h2>3D MODEL DESCRIPTION</h2>This GPU support riser uses a simple keyed pin to lock in your desired height and allows you to prop up your heavy graphics card to eliminate visually unpleasant sagging. The star of the show is the high-resolution badges that slide onto the GPU support riser using a tongue and groove mounting system. These are easily swappable to customize the look of your system as you see fit. Each badge starts as a high-resolution version of its 2D counterpart and is then modeled in 3D using CAD design software. Each badge is Printed on a Prisa MK3S+ Printer with a 0.4mm diameter nozzle @ 0.07mm layer height to capture all the fine details. New badges will be added as they are modeled and the possibilities are endless. If what you're looking for is not here, send me a message with your request.GPU Riser height range = 60mm minimum height up to 94mm maximum heightBadge Sizes = Depending on the badge they range from 50mm wide up to 107mm for the longer designs<h2>3D PRINTING SETTINGS</h2>No supports neededBrim if needed for adhesionTop most surface ironed for best quality

GPU Support Bracket Compatible with Personalized Badges (see my profile for badges)

Exotech

Original Creator is <a target="_blank" href="https://www.printables.com/de/@chenwei_679522" rel="nofollow noopener">chenwei</a>&nbsp;Disable Flow Calibration !&nbsp;Slowly tap into the interference fit with a wooden hammer. I printed in PLA, not ABS, it warps. I have uploaded my parts and location for your reference. I increased the padding of the handle, 15% is too small. I already broke one, 45% filled reprint. Do not mistake the installation direction, it is difficult to disassemble after installation. Turn off "Flow Calibration" when printing as it will affect the printed part. If you're going to put it on top of the printer，don't print first, I am designingplaced on the printer, testing and uploading. I originally designed this to sit on a desk. If placed on the printer, it will interfere with the screen and cover handle.This version is an early design and I recommend printing the version below.on the printer：https://www.printables.com/model/465919-put-on-the-printer-bambu-ams-drawer-stand

Bambu AMS drawer Stand

P1S upgrades

schiko

Pre-colored .3mf file included.Best to be printed in wall generator Arachne and 3 walls.It&#39;s a bit hard to close and open the box for the first time. You need much power, but after that it will work much easier.I could have used bigger tolerance but then the box would work only shortly.&nbsp;Also available for <a target="_blank" href="https://makerworld.com/de/models/48376#profileId-50213" rel="nofollow noopener">CR2450 cells</a>.

CR2032 Box for 5 Cells – Print-in-Place

Functional

mcgybeer

Pumpkin Spinner!Print in place, easy and quick to print. A cool seasonal fidget to enjoy during Halloween.&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/1O0_qQfCCwk"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=1O0_qQfCCwk"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/1O0_qQfCCwk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;Tip: If you feel it too tight or too loose, or even if you want to scale them, you can play with the XY compensation in the slicer to get the right tolerances.&nbsp;Check here for <a target="_blank" href="https://www.mcgybeer.xyz/commercial-license" rel="nofollow noopener">Commercial License</a>

PC

P1S upgrades

Functional

Cool Prints