Z3D420

cyanidesugar

An oversized Charmander Pokemon card, and completely 3D printed, and print in place! This is another Hueforge hybrid print that uses filament painting methods and traditional 3D printing to create a combined pop-art effect piece. &nbsp;This took 5 hours on my Bambu Lab P1P, using 4 different filament colours with orange repeated for Charmander at the end of the print. If you do not have an AMS, no fear! Just download the 3MF file and instead of a filament change, insert a pause at the correct layer heights and manually load and unload the filament spool yourself before resuming the print. &nbsp;It is large, at 170mm x 240mm in size. If you have to resize it to fit your printer bed, please only scale the X and Y dimensions, but do not alter the Z dimension, otherwise the layer swaps will be inaccurate. &nbsp;If you are using the Makerworld One-Click printing, all settings will have been applied to this print, and you can just hit Print. If you do not want to use that, please download the 3MF file, or the STL and apply the recommended settings below.&nbsp;Print Instructions: <ol><li>The Hueforge portion of the print (0mm - 2.48mm) should be printed at 100% infill, at a 0.08mm layer height with 0.2mm base.</li><li>The Charmander (and it's tail) portion of the print (from 2.52mm to 165mm height) should be printed at 5% infill with 3 walls, 3 top and 3 bottom surfaces and at 0.16mm layer height. You can use a layer height modifier to set these settings or edit the per-object settings.</li></ol>&nbsp;Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA CC3D Orange Transmission Distance: 7.4 PLA CC3D Lemon Yellow Transmission Distance: 8 PLA Kingroon White Transmission Distance: 8&nbsp;Swap Instructions: Start with Black At 1.08mm swap to Orange At 1.64mm swap to Lemon Yellow At 1.96mm swap to White At 2.52mm swap to Orange (for the Charmander!)&nbsp;Post Processing:You'll need to paint Charmander's eyes and body yourself (I didn't, I got lazy), but that shouldn't take too much time! I suggest using a paint pen if you're finding it hard to use paint brushes!&nbsp;The Charmander STL itself was obtained from <a target="_blank" href="https://www.thingiverse.com/thing:826836" rel="nofollow noopener">here</a>, uploaded by user <a target="_blank" href="https://www.thingiverse.com/ClassyGoat" rel="nofollow noopener">ClassyGoat</a>.&nbsp;____________________________________ Commercial License to Sell PrintsIf you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my <a target="_blank" href="https://patreon.com/cyanidesugar3DP?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link" rel="nofollow noopener">Patreon</a>! ____________________________________

Oversized Charmander Pokemon Card - Hueforge Hybrid

pokemon cards

Stag 3D

<h3>How to play:</h3><ol><li>Setup the base on a flat surface and place the Tetra Balance block onto it.</li><li>Take it in turns with your opponent to place the blocks onto the Tetra Balance piece. You can place the blocks with one hand only and once you have chosen a bloke you cannot change it.</li><li>Repeat until the tower eventually falls. </li><li>If you cause the tower to fall your opponent wins. </li></ol>&nbsp;

Tetra Balance Game

toys

Scattered Collectables

Another variation of my Ornamental cubone skull, this one has a different design added to the mesh via Zbrush.Prints with less supports than the original.&nbsp;Join my patreon for the right to sell physical prints <a target="_blank" href="https://www.patreon.com/ScatteredCollectables" rel="nofollow noopener">https://www.patreon.com/ScatteredCollectables</a>&nbsp;The provided 3mf has the skull rotated onto its back, with a section cut off for a flat base, the extra piece cut off will also print, just glue it onto the back. Printing in this orientation uses less supports and gives a nicer finish compared to printing it flatter with the teeth against the plate.The slower wall speeds are to account for the overhangs and fine details. faster wall speeds will cause rough spots around eyes and teeth

Ornamental Cubone Skull V2 Pokemon 

pokemon 

SugarPaws3D

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.25mm&nbsp;Swap Instructions: Start with Black At layer #6 (0.85mm) swap to Gray At layer #10 (1.33mm) swap to White for the rest.&nbsp;Replace with any color to customize the look! (As seen in brown photo, swapped brown for white & grey for layers 6+)Art by me! Inspired by a scene from the new “Godzilla Minus One”

Godzilla Minus One Inspired Filament Painting Hueforge

hueforge

The Crafty Maker

Update 08-11-2023: Added additional boxes with varying slot counts from 2 up to 10.&nbsp;5 or 10 slot shadow box to display the shadow box sets. &nbsp;Best printed flat with front on build plate using regular supports. Increase support top Z distance to 2.2 or even 2.4 for easy support removal.&nbsp;ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

Shadow Box

shadowbox

Waikikiprod

Mushroom keychain of Mario world <a target="_blank" href="https://www.amazon.fr/JZK-Porte-cl%25C3%25A9s-cha%25C3%25AEnette-Artisanat-Bricolage/dp/B07BQJLPL4?pd_rd_w=LEyzK&pf_rd_p=4f81e5d5-7c28-47df-a342-b67c8ca47f0c&pf_rd_r=WXJG29C70K05Q1F139QE&pd_rd_r=a70e1e79-4f92-44fb-8009-6129685640b4&pd_rd_wg=dn5U7&pd_rd_i=B07BQJLPL4&psc=1&ref_=pd_bap_d_rp_49_t&_encoding=UTF8&tag=thingiverse09-20&linkCode=ur2&linkId=db190f77f57b218e27d55c51817e78ac&camp=1642&creative=6746" rel="nofollow noopener">Attache porte-clés</a>PLA Filament : Noulei Antique Gold -> <a target="_blank" href="https://www.amazon.fr/Noulei-Filament-imprimante-Printing-Antique/dp/B07PQT2ZNT/ref=sxts_rp_s1_0?crid=2VJ2JODAABL0F&cv_ct_cx=noulei+Antique+gold&keywords=noulei+Antique+gold&pd_rd_i=B07PQT2ZNT&pd_rd_r=95f1272c-eeac-442a-9360-cbd9c0faeaf9&pd_rd_w=eI0Zc&pd_rd_wg=bfO3T&pf_rd_p=9d358dac-be2e-4a3a-aa4a-1990b224b8f3&pf_rd_r=FBT68T9HWQYFMXBBWR98&psc=1&qid=1647885883&sprefix=noulei+antique+gold%252Caps%252C647&sr=1-1-9d35b2fb-722c-404c-ae6e-16ef63349c57&_encoding=UTF8&tag=thingiverse09-20&linkCode=ur2&linkId=c0b534da52b65e33e8496bc7ba88da06&camp=1642&creative=6746" rel="nofollow noopener">PLA Noulei Antique Gold</a>Follow me on<a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener"> Instagram</a> / <a target="_blank" href="https://www.tiktok.com/@waikikiprod" rel="nofollow noopener">TikTok</a> / <a target="_blank" href="https://www.facebook.com/waikikiprod" rel="nofollow noopener">Facebook</a> / <a target="_blank" href="https://beacons.ai/waikikiprod" rel="nofollow noopener">Beacons </a>Discover My Best 3D Models<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/14009?profileId=13993" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_49db957f2d46d.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/14009?profileId=13993" rel="nofollow noopener">X1C Keychain</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13847?profileId=13645" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_03b57abb0262f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13847?profileId=13645" rel="nofollow noopener">Axe Magnet</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_d454006b5cde4.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13159?profileId=13163" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_ec02bcb1e833b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13159?profileId=13163" rel="nofollow noopener">Foaming Soap Dish</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13723?profileId=13450" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_e177dc4e45a09.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13723?profileId=13450" rel="nofollow noopener">The console of your childhood</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13846?profileId=13640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_2d9999d3ea301.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13846?profileId=13640" rel="nofollow noopener">The Ultimate Fidget Avocado Keychain</a></td></tr></tbody></table></figure>

Mushroom Mario Keychain

keychains

Fixumdude

Cover your can with this Franken-Stein Can Coozie with flip top to protect your drink from angry villagers!&nbsp;Franken-Stein Can Coozie with flip top.&nbsp;Recommend at least 3 walls to make sure the top pegs can snap into the handle without breaking.If your printer can't do large bridges then a little support on the underside of the top part of the handle is recommended.&nbsp;Single color Example printed in Extrude Signal Green PLA on the Bambu X1 Carbon at 0.24 layer height, 3 walls, 3 top and bottom layers, and 10% grid infill. Prints in about 5 ½ hours.&nbsp;Four color example printed in: Filament 1 - Hatchbox White PLA Filament 2 - PolyMaker Silk Chrome PLA Filament 3 - PolyMaker PolyTerra Pastel Mint PLA Filament 4 - Hatchbox Black PLA &nbsp;Printed on the Bambu X1 Carbon at 0.24 layer height, 3 walls, 3 top and bottom layers, and 10% grid infill and limited tree supports.

Franken-Stein Flip Top Can Coozie

mugs

Bottega 3D

For personal use only FOR COMMERCIAL LICENSE: <a target="_blank" href="https://www.patreon.com/bottega3d" rel="nofollow noopener">Patreon</a>. Social Tag: @bottega.3dAMS/MMU available in 3mf file.Love-ly is a cute articulated little dragon. It is printed in place and doesn’t require supports.If you have adhesion difficulties while printing, I recommend using raft or brim. Good calibration and retraction is necessary for a great result.For personal use onlyAll my files are protected by Copyright, should NEVER be shared or resold.To legally sell physical print of my design and if you want to get the latest Models and exclusive designs for your support visit: <a target="_blank" href="http://www.patreon.com/bottega3d" rel="nofollow noopener">www.patreon.com/Bottega3D</a>&nbsp;NOZZLE: 0,4 mm. LAYER: 0.16 or less OUTER WALLS: 3 INFILL: 10% SUPPORTS: NO Z-HOP: 0,4 – 0,8&nbsp;

Love-ly Tiny Dragon, Articulated, Flexy, Toy

dragons

Lordchickenblaster

portal gun

cosplay shizzzz

Grainne_Ni_Mhaille-LadyBawlsArt

This is the second set of multiple SVG's adapted to print with FDM and sized so that a pin/tack can be glued on the back and worn as a lapel pin or pinned to any other hat. A must have for any classy pirate or seafaring buccaneer

Pirate Lapel And/Or Hat pins V2

badges

PenolopyBulnick

This necklace is made up of cubes with rounded edges and corners. The back of the necklace is smooth. It looks great with tri-colored filaments. &nbsp;This is an updated design from what I had originaly, but I shared the process for designing it on Instructables: <a target="_blank" href="https://www.instructables.com/Cubic-Statement-3D-Print-Necklace/" rel="nofollow noopener">https://www.instructables.com/Cubic-Statement-3D-Print-Necklace/</a>&nbsp;After the pieces are finished, the earrings just need a jump ring + earring, and the necklace needs jump rings + chain + clasp. &nbsp;For the necklace, I have a flat top version and “pointed” version. It felt like the points just didn't print well and had to be trimmed off so I just chopped them off, but I'll give you the option. &nbsp;Also for sale in my Etsy shop: <a target="_blank" href="https://www.etsy.com/listing/1577201459/curved-cubic-geometric-pendant-statement" rel="nofollow noopener">https://www.etsy.com/listing/1577201459/curved-cubic-geometric-pendant-statement</a>

Geometric Cubic Statement Necklace and Earrings

jewlery

Willi 3D

Create a STAP (Single Trooper Aerial Platform) for you or your battle droid.&nbsp;If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work bye me a coffee.</a> Thanks!&nbsp;Description:This is a KIT CARD of a Star Wars STAP and compatible with my <a target="_blank" href="https://makerworld.com/de/models/13745?profileId=13463" rel="nofollow noopener">B1 Battle Droid</a>.Scale 1:9 (90% for 1:10)May the force be with you!&nbsp;Update:(02/08/23) -optimized bridging and assembly&nbsp;Printing:Layer height: 0.1Supports: NoBrim: NoMaterial: PETG, (ABS), (PLA)&nbsp;Assembly:The parts are put together as shown in the picture. The handlebar needs to be bent slightly to place the B1 droid on it.

Star Wars STAP Kit Card

kitcards

Ryzwick

Originally remixed on printables, seems the original was removed. This is the remixed version with color applied for MMU/Bambulab with AMS support. Color applied in Bambu StudioColors applied are Grey/White/Black/Green.11 hours for one, 14 hours for two three perimeters 25% lightning infill halved the prime volume size lower the flushing volume down to 180

Totoro Multi Color / AMS

anime

martin.taichl

This is my MCRN Donnager class model from the show the Expanse. Model is some 35cm long and comes with a stand. It is a kit so it does not require a single drop of glue to put together.  I highly recommend to use the following video in order to assemble it  <figure class="media"><div data-oembed-url="https://youtu.be/wQFcPteNuN8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/wQFcPteNuN8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Donnager Class from the Expanse

stargate

Williams Industries

Fun little coaster, scale it up larger for some sweet wall art&nbsp;I have loads of stuff on my Patreon: https://www.patreon.com/WilliamsIndustries

Evil Dead Coaster/wall art

coasters

This is my MCRN Donnager class model from the show the Expanse. Model is some 35cm long and comes with a stand. It is a kit so it does not require a single drop of glue to put together. I highly recommend to use the following video in order to assemble it <figure class="media"><div data-oembed-url="https://youtu.be/wQFcPteNuN8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/wQFcPteNuN8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

the expanse 

Jorge Rui

<h4>Description and contextualization</h4><blockquote>A present to you, a Rack for the Mutil-Modular Storage System (MMSS) that I've been developing. Don't go running to buying a ton of filament, first you must understand how this work....You can do it step by step.You can start with a simple model, and store it in your closet, some drawer, or card box; a month later, you may buy something else and print the corresponding module to store your precious component or accessories. Someday, you may need a box or maybe a case (if you have to transport your things) to store the modules you already have…In the limit, some people, need a complete rack, because they have a lot of things (maybe a print farm).But this rack, on its own, has the Build plate dispenser, and for most people, this project ends there. But you are like my, and make things scalable and that's why this is all modular.</blockquote><h3>Introduction</h3>This rack serves as a support to the different projects carried out around what I can already call an ecosystem, namely; <ul><li><a target="_blank" href="https://www.printables.com/model/556159-multi-modular-storage-system-mmss" rel="nofollow noopener">Multi-Modular Storage System -MMSS</a> </li><li><a target="_blank" href="https://www.printables.com/model/557727-box-with-lid-for-mmss" rel="nofollow noopener">Box with lid for MMSS</a></li><li><a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for the MMSS</a></li></ul><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_yakhnxubxzta.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_h8ksq5b2vafv.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_opyjqt3vl1be.jpg"></figure></td></tr><tr><td><a target="_blank" href="https://www.printables.com/model/556159-multi-modular-storage-system-mmss" rel="nofollow noopener">Multi-Modular Storage System -MMSS</a> </td><td><a target="_blank" href="https://www.printables.com/model/557727-box-with-lid-for-mmss" rel="nofollow noopener">Box with lid for MMSS</a></td><td><a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for the MMSS</a></td></tr></tbody></table></figure><ul><li>The amount of modules you can add is growing fast:<ul><li><a target="_blank" href="https://www.printables.com/model/557566-mmss-2x4-module-glue-stick-and-hexagonal-keys" rel="nofollow noopener">MMSS 2x4 Module - Glue Stick and Hexagonal Keys</a></li><li><a target="_blank" href="https://www.printables.com/model/557452-mmss-1x1-module-microsd" rel="nofollow noopener">MMSS 1x1 Module - MicroSD</a></li><li><a target="_blank" href="https://www.printables.com/model/557397-mmss-1x1-module-nozzle-wipper" rel="nofollow noopener">MMSS 1x1 Module - Nozzle Wipper</a></li><li><a target="_blank" href="https://www.printables.com/model/557390-mmss-1x1-module-filament-cutter-microsd" rel="nofollow noopener">MMSS 1x1 Module - Filament Cutter + MicroSD</a></li><li><a target="_blank" href="https://www.printables.com/model/570948-mmss-1x1-module-filament-cutter" rel="nofollow noopener">MMSS 1x1 Module - Filament Cutter</a></li><li><a target="_blank" href="https://www.printables.com/model/559405-mmss-1x2-module-hotend-and-silicon-sock" rel="nofollow noopener">MMSS 1x2 Module - Hotend and Silicon Sock</a></li><li><a target="_blank" href="https://www.printables.com/model/561092-mmss-1x3-module-complete-hotend" rel="nofollow noopener">MMSS 1x3 Module - Complete Hotend</a></li><li><a target="_blank" href="https://www.printables.com/model/561215-mmss-2x3-module-small-scraper" rel="nofollow noopener">MMSS 2x3 Module - Small Scraper</a></li><li><a target="_blank" href="https://www.printables.com/model/564616-mmss-2x5-module-liquid-glue" rel="nofollow noopener">MMSS 2x5 Module - Liquid Glue</a></li><li><a target="_blank" href="https://www.printables.com/model/563208-mmss-various-size-modules-pocket-with-lid" rel="nofollow noopener">MMSS various Modules - Pockets with Lid</a></li><li><a target="_blank" href="https://www.printables.com/model/580675-mmss-2x3-module-spool-holder" rel="nofollow noopener">MMSS 2x3 Module - Spool Holder</a></li><li><a target="_blank" href="https://www.printables.com/model/567939-mmss-1x5-module-original-bambu-lab-scraper" rel="nofollow noopener">MMSS 1x5 bambu lab original scraper</a></li><li><a target="_blank" href="https://www.printables.com/model/618034-mmss-2x4-module-pocket-with-lid-for-bolts-and-magn" rel="nofollow noopener">MMSS 2x4 Bolts and Magnets Pockets with Lid</a></li><li><a target="_blank" href="https://www.printables.com/model/686267-mmss-2x2-module-extruder" rel="nofollow noopener">MMSS 2x2 Module - Hardened Steel Extruder Unit</a></li><li><a target="_blank" href="https://www.printables.com/model/613965-bambu-lab-ams-service-and-spares-parts-for-the-mms" rel="nofollow noopener">MMSS for AMS Modules</a> <ul><li>4x Active extrusion wheel assembly;</li><li>4x Active support shaft assembly;</li><li>4x PTFE Tube Fast Connector;</li><li>4x Driven Support Shaft Assembly</li><li>1x First Stage Feeder</li></ul></li><li>More to come… I'm always adding new modules, please check <a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">my profile </a> and here on <a target="_blank" href="https://makerworld.com/pt/u/3059492201" rel="nofollow noopener">makerworld.com</a> for the later information, some are free, others are only available as exclusives for members of "<a target="_blank" href="https://www.printables.com/@jorge_rui/exclusive-models" rel="nofollow noopener">my club</a>".</li></ul></li><li>This rack adds now support for the build plates.</li></ul><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_028behu1ai4g.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_r0t2wpt4b0hc.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_iynsbv28k7qz.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_e0zdl1u2l61m.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_0xxhhupg1j68.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_b96wxyl4ivi0.jpg"></figure></td></tr></tbody></table></figure>… and more<h3>Assembly info</h3><blockquote>Read carefully the explanation that fallows. I've tried to be systematic for anyone to understand. This os not a print of a small toy or a vase, you will need to make decision, so make them informed.</blockquote>1- Start here - Assemble the base that will serve the build plates. if you have many you can stack them together. 1.1 - All you need, and more, is available withing the file “rack_lower_module.3mf”.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_90fcltoa6t1b.png"></figure>2 - Now you have a choice to make: 2.1 - Stop here on the basic module for the build plates, or; 2.2 - continue to add other parts from the MMSS ecosystem.If MMSS = 2.1 then; You will need a cover like this to finish the job, you will find that part on the 3mf file regarding the rack for build plates<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_v5wp6a6k3st9.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_6wmgn4kaqu97.png"></figure>Tip:For the <a target="_blank" href="https://shrsl.com/4cpnz" rel="nofollow noopener">PETG </a>springs, flex the back plate a little for them to slide on the dovetail. <figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_cg9pvea3vxof.png"></figure>If MMSS = 2.2 then;<ul><li>you can add other rack for build plates, if really like build plates :) or;</li><li>add a MMSS box or case, or several of them. </li></ul> 2.2.1 Ok, you need to add more modules on top of the “Base module" that serves the build plates. Now you can choose to continue with the barebone or the complete version.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_xvcygijnz78z.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_dgrggf1uh6w5.jpg"></figure></td></tr><tr><td>2.3 - Barebone rack</td><td>2.4 Complete rack</td></tr></tbody></table></figure>If MMSS = 2.3 then;2.3 Barebone RackIf you go this way, you will need some new parts that you can find on the 3mf file “rack_middle_modules.3mf”.<blockquote>This drawing will help you choose the right heights for the spacers, almost all the parts are the same for any modules you choose, with the exception of the top.</blockquote><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_ezkcpjon3vvn.png"></figure>Easy, isn't it? ;) 2.3.1 There are some parts that you will need to go up, in what I call, the middle steps. These parts can be found on the 3mf file stated on 2.3 point. You can stack modules on top of each other, most parts are the same, just be careful to choose the “Pillars” A, B or C depending on what you need, these will give you the space necessary for each module (see drawing above).&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_max8ix3ip37e.png"></figure><blockquote>See does red pins? They have to go with a tight fit, if you notice them loose on the guides or on the Pilar’s see if the filament is calibrated, sometime, certain materials shrink more than others, petg tends to be more stable… anyways if all fails, use the scale tool on the slicer to compensate.</blockquote> 2.3.2 At some point you will reach the top, and you will need to close the rack top.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_mzlwingfk9g9.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_572cuaywt1k1.png"></figure></td></tr><tr><td>2.3.2.1 - Normal top</td><td>2.3.2.2 - Top made with the lid from the Box for the MMSS</td></tr></tbody></table></figure> 2.3.3 After choosing the top, you can print the corresponding modules from the “rack_tops_modules.3mf”.If MMSS = 2.4 then;2.4 The complete rack - This will add some panels to the side of the rack, making it look like this:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_kft5olj06k4q.jpg"></figure><blockquote>The aspect may vary depending on the modules you have chosen on the previous steps.</blockquote> 2.4.1 You can see that you will need different panels depending on the height of the modules, something very similar to the situation of the Pillars A, B and C.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_qren5ivpbsnu.png"></figure>To print this, you must choose what you need on the file “rack_lateral_panels.3mf”<blockquote>If you have the “<a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for the MMSS</a>” with the lower Lid for the PTFE tubes, use the “Cover E”If you plan to use the case with lid in one of the middle stages, you should use Pillar C and a new Cover; Cover F (Cover lateral panel_F.step)</blockquote>Material to use<ul><li>If you use this affiliate links to buy filament, it will cost you the same and I will get a small "kickback". Thanks !<ul><li><a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&u=4026304&m=138211&urllink=&afftrack=" rel="nofollow noopener">Filament used on this project</a>, choose any color you like. For the greatest result and if your printer can do it, use <a target="_blank" href="https://shrsl.com/4cvrd" rel="nofollow noopener">PLA with carbon fiber</a>, amazing finish! Maybe it is time to test that sample you may have received with your printer (X1C users).</li><li>I've used in this project some <a target="_blank" href="https://shrsl.com/4cpnz" rel="nofollow noopener">PETG </a>too.</li></ul></li></ul><h3>Change log:</h3><ul><li>19-09-2023 - change the diameter of the TPU feet for better fitting. If you already have them, just put a little of TPU filament on the side if you find it to lose. </li><li>21-09-2023 - Better layout of the “rack_lower_module.3mf” file . Thanks to <a target="_blank" href="https://www.printables.com/@amateur3d_939146" rel="nofollow noopener">Amateus3D</a></li><li>22-09-2023 - Back_plate_narrow has now stronger “pegs”. File changed “rack_middle_modules.3mf”. Thanks to <a target="_blank" href="https://www.printables.com/@hoonu_203988/makes" rel="nofollow noopener">hoonu</a>.</li><li>22-09-2023 - Lateral panels pegs should be stronger now. Change to some aspects of the layout on the 3mf file.</li><li>24-09-2023 - Small change to the small pin diameter, for stronger fit. File changed “rack_middle_modules.3mf”.</li><li>01-10-2023 - Added a new panel if you decide to use the box with lid in one of the middle stages (see description above in 2.4.1) - Thanks to <a target="_blank" href="https://www.printables.com/@thedevilsjeste_18993" rel="nofollow noopener">thedevilsjester</a></li><li>10-10-2023 - Some members(1) reported some instability of the structure, namely the configuration that presents the top the “normal top” and already has some modules, so already with a certain height. This update is intended to address those issues. Thus, the updated components are:<ul><li>rack_tops_modules.3mf - in there the steps updated are:<ul><li>Top_plate_for_back.STEP</li><li>Top_plate_for_front.STEP</li><li>Top_plate_for_Front_right.STEP</li><li>Top_plate_for_Front_left.STEP</li><li>Top_plate_for_BPlate_right.STEP</li><li>Top_plate_for_BPlate_left.STEP</li></ul></li><li>If the structure is ok to you, that's because the fits are ok and all is working fine.</li></ul></li><li>12-10-2023 - Bambu Lab logo was inverted, this can be found on file: “rack_tops.3mf” <ul><li>A new version of the pin was added that may offer a better fit in some situations. This new pin is found on file: “rack_middle_modules.3mf”</li></ul></li><li>18-10-2023 - Added a lid for the plain drawer: “lid_simple_drawer.step”</li></ul><h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener">PayPal</a>.

Storage Rack for the MMSS

bambu tools and mods

GamerForge

Hey Guys I designed a Mandalorian Cartridge holder / Bullet Holder. you can put it on a leather strap like in the series!!

Star Wars The Mandalorian Cardridge holder / Bullet holder

mandalorian mercs armours

This is the wayShadow box set from the iconic Star Wars The Mandalorian series. It consists of 5 numbered plates.I've used the following colors:<ul><li>Plate 1: Geeetech PLA Black</li><li>Plate 2: PolyMaker PolyTerra PLA Army Brown</li><li>Plate 3: PolyMaker PolyTerra PLA Peanut</li><li>Plate 4: 3DJake ecoPLA Glitter Gold</li><li>Plate 5: R3D PETG Coffee</li><li>Logo: Geeetech PLA Black + 3D Jake ecoPLA Ultra-Satin Silver (multicolor)</li></ul>The colors are just guidelines, you can get creative with the color scheme for a personal touch.&nbsp;i've also added an additional Star Wars logo that you can attach to the shadow box.&nbsp;You can find the box to display this set here: <a target="_blank" href="https://makerworld.com/en/models/13471" rel="nofollow noopener">https://makerworld.com/en/models/13471</a>&nbsp;The box with lid and the wall mountable box are both Patreon/Printables/Thangs subscriber exclusives. (Box with lid also available for individual purchase on <a target="_blank" href="https://cults3d.com/en/3d-model/art/shadow-box-with-lid-thecraftymaker" rel="nofollow noopener">Cults3D</a>)&nbsp;Print settings&nbsp;Plates<ul><li>No supports</li><li>100% infill</li><li>Arachne wall generator recommended</li></ul>Logo<ul><li>Supports</li><li>100% infill</li><li>Arachne wall generator recommended</li></ul>&nbsp;ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

The Mandalorian Shadow Box (A)

starwars

vdk.liam

A lightbox with the honda logo, printed on a bambulab using ams for the white and the black.You can also print the black and the white parts seperatly.I also added the fusion file if needed.

Honda lightbox

lightboxes

IXPatch

This is a cute little articulated llama 🦙 It can stand on its own and move each leg separately. It is a print-in-place model, requiring no supports or assembly.In addition to the regular single-color version, there is also a multicolor version for Bambu Studio. Enjoy :)

Cute Llama - Flexi Articulated Animal (print-in-place)

animals

Shakaworld3D

Easy print in place Sea Turtle Dragon that is part of my sea creatures collection. Added version that will fit on the mini. If you would like to sell 3d prints of this design either contact me or sign up for my patreon at patreon.com/shakaworld3d. You are allowed to include prints from this design in your 3d printing/printer/filament related videos/ads attribution would be appreciated.

Shakaworld3d Baby Sea Turtle Dragon

articulated toys

neil3dprints

Update - 20/11/20 Some people have had issues with the digger arm not keeping position. On one of my test prints, I also had this issue. I can suggest using the technique on the below Youtube video to strengthen the digger arm. Happy printing. :-) <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=uciSbQb7lXg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/uciSbQb7lXg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Little Cities is a 3D Printable toy series where miniature buildings and vehicles are stored within a purpose designed case until ready for play. Once play begins simply unfold the case and attach the miniature buildings to the outside of the case to create a mini play set. Each case will be themed with mini vehicles to print as well. The cases can also interlock so you can expand your little cities playset as I develop and release new Little City themed cases.This one is the Quarry!!! Lift the barrier to let the Dump Truck in. let the Digger load up the Dump truck, and when the Dump truck is ready let it lift to release the load. This little Citie was a little different for me, as I sculpted the terrain in Blender 3D. Although all STl files are undamaged and repaired where required, you will find with the terrain there are some hollow parts. Not to worry. Its the end result you want. And the end result for the terrain is fine. So happy printing. :-)Note - This is not a MMU print. Simply print the parts in the appropriate colours and glue them together.To see how to carry out filament changes mid-print, please refer to the link below. <a target="_blank" href="https://help.prusa3d.com/en/article/color-change_1687" rel="nofollow noopener">https://help.prusa3d.com/en/article/color-change_1687</a>Please check out and follow my profile page to see what Little Cities have already been released.As this is part of a series I will design other themed cities, the bonus being is the cases will interlock, thus creating a bigger play-set. The roads will run in sync too. At this point I have about 26 little cities planned.Please note some of the parts may cause a choking hazard, so these 3D printed toys are not recommend for children under the age of 6.If you want to stay up to date with this series and or perhaps interested in other projects I am working on, please check out my instagram.<a target="_blank" href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow noopener">https://www.instagram.com/neil3dprints/?hl=en</a><h3>Print instructions</h3>This is not a MMU print. Simply print the parts and assemble them together.Please refer to the images for assembly instructions.The case I printed at 0.2mm layer height and 0.15mm for all other parts. Refer to the file names to see if colour changes (CC) are required and for what layer heights to apply the colour changes.The vehicle wheels print in one. Be patient and gentle to loosen them so they can turn. Also use a little glue to attach the dumb truck together while ensuring the wheels still turn.Any questions or queries just send me a message and I will get back to you when I can.If you want to stay up to date with this series and or perhaps interested in other projects I am working on, please check out my instagram.<a target="_blank" href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow noopener">https://www.instagram.com/neil3dprints/?hl=en</a>